Built-in refrigerator that needs an exact fit
We measure the opening, secure the unit and align the panels so the fridge looks like part of the cabinetry.
Built-In Refrigerator Installation →Serving 49 Chicago-area suburbs
Kitchen Appliance Installation in Chicago & the Suburbs
New range, dishwasher, built-in fridge or microwave? We install kitchen appliances in Chicagoland and take the old ones away.
- Serving the Chicago suburbs, from Naperville to Evanston
- Installed level, sealed and tested before we leave
- Clear price for the install before the visit
Appliance installation jobs we handle in Chicagoland
Getting a new appliance into the kitchen is the easy part. In Chicagoland we check what's behind it first: the gas shutoff, the circuit, the water valve, the drain and the size of the opening. Then we connect it per the maker's instructions, test it and haul the old unit away.
Circuits and gas that may not be ready
A bigger wall oven, a built-in microwave or an induction range may need a new circuit. An electrician handles it before we install.
Switching to induction
Induction usually needs a 240-volt circuit of the right size. An electrician checks the panel capacity, and we install the cooktop or range.
Oven, Range & Cooktop Installation →Ice maker with no water line
If your new fridge has an ice maker and there's no supply behind it, a line has to be run. We connect it with an accessible shutoff.
Built-In Refrigerator Installation →Over-the-range microwave replacing a hood
Swapping a range hood for a microwave means a mounting plate, a template-drilled cabinet bottom and a vent connection. We do all three.
Microwave Installation →Dishwasher waiting to be connected
If the store delivered the dishwasher without hooking it up, we connect water, drain and power and run a test cycle.
Dishwasher Installation →Leaks after a previous install
When an appliance installed by someone else starts leaking, we pull it, check each joint and put it back level and dry.
Dishwasher Installation →Old appliances that need to go
When appliances are replaced, the old ones have to go somewhere. We disconnect them safely and haul them away.
Kitchen Appliance Removal →What we hook up and check
- Readiness checkModel numbers matched against your gas, power, water, venting and the opening.
- Gas connectionsGas hookup with fresh fittings and a leak check.
- Electrical connectionsCord or hardwire connection; dedicated circuits are added by an electrician.
- Water and drain connectionsSupply lines, drains, high loops or air gaps per code.
- Anchoring and levelingAnti-tip brackets, mounting clips and leveling legs set per the instructions.
- TestingBurners lit, elements heated, cycles run and joints checked for leaks.
- Haul-away and cleanupOld appliances and packaging removed and the area cleaned.
What to pick before the install
Install partsNew gas connectors, braided supply lines, cord kits and anti-tip brackets.
Built-in refrigeratorsBuilt-in, column and panel-ready refrigerators, plus undercounter units.
Ranges, wall ovens and cooktopsGas, electric, dual-fuel and induction cooking appliances.
Panels and trim kitsCustom panels and trim kits that make appliances look built in.
MicrowavesMicrowaves mounted over the range or set into cabinets.
Kitchen Appliance Installation we offer
Dishwasher InstallationOld unit out, new dishwasher connected, leveled and leak-tested.
Oven, Range & Cooktop InstallationGas and electric ranges, wall ovens and cooktops, safely connected.
Built-In Refrigerator InstallationBuilt-in and panel-ready fridges fitted flush, anchored and connected.
Microwave InstallationOver-the-range, drawer and built-in microwaves mounted, powered and vented.
Kitchen Appliance RemovalOld kitchen appliances disconnected, carried out and recycled. Kitchen Appliance Installation across Chicagoland
The same job looks different in a 1920s bungalow, a 1970s split-level and a new subdivision. Here is what we plan for in different parts of the region.
Prewar towns
Older homes with older connections
Older Evanston and Berwyn houses often have worn gas shutoffs, small electrical panels and old water valves. We check them before connecting anything new.
Condo and townhome towns
Condo deliveries and building rules
We coordinate with the building so deliveries, installs and haul-away go smoothly.
Itasca, Evanston, Glendale Heights, Carol Stream, Lisle, Mount Prospect
Kitchen Appliance Installation: before and after
Before
AfterWarrenville kitchen, 1980s two-story: kitchen appliance installation
This one is a 1980s two-story near Summerlakes. What we started with: black appliances. What bothered the owners most: appliances that needed upgrading. The result: a new range installed and level, anti-tip bracket in place. Work included electrical connections, water and drain connections, plus haul-away and cleanup.
Kitchen Appliance Installation in Warrenville →
Before
AfterDes Plaines kitchen, 1980s two-story: kitchen appliance installation
A 1980s two-story in Des Plaines, a typical kitchen for Des Plaines. What we started with: almond appliances. What bothered the owners most: appliances older than the kids. Finished kitchen: a new range installed and level, anti-tip bracket in place. The job covered electrical connections, water and drain connections, plus anchoring and leveling.
Kitchen Appliance Installation in Des Plaines →
Before
AfterA Park Ridge 1990s two-story colonial: before and after
A 1990s two-story colonial in Park Ridge, a typical kitchen for Park Ridge. What we started with: white appliances. The main complaint was old appliances that no longer worked well. After: a new range installed and level, anti-tip bracket in place. Work included readiness check, electrical connections, plus testing.
Kitchen Appliance Installation in Park Ridge →Install day
- Send the model numbersTell us what you're installing and send photos of the current setup.
- Readiness checkA check of every connection the new appliance needs.
- Written estimateAn itemized estimate for removal, installation, parts and any electrical, plumbing or cabinet work.
- Install, test and haul awayWe install, test, clean up and remove the old appliances.
Install questions
How much does appliance installation cost?
A simple swap and an install with new circuits or gas lines are priced very differently. You get a line-item quote.
Will my kitchen need new electrical work?
Older homes may need a new circuit or more panel capacity for some appliances. We find out early.
Do you also install range hoods?
We handle venting for over-the-range microwaves, and range hoods have their own service page.
Do you haul away old appliances?
We do. The old appliances leave with us.
Can you install a full appliance package?
Yes. We install all your new kitchen appliances together and remove the old set.
Which towns do you serve?
Chicago and 49 suburbs, from Naperville and Aurora to Evanston, Schaumburg and Orland Park. Pick your town below for local details and ZIP codes.
Kitchen Appliance Installation near you
Pick your town for local details, ZIP codes and nearby projects.
