Serving Roselle & nearby Bloomingdale, Hanover Park

Kitchen Appliance Installation in Roselle, IL

New range, dishwasher, built-in fridge or microwave? We install kitchen appliances in Roselle and take the old ones away.

  • Installers working in Roselle ZIP 60172
  • Hookups by licensed trades where the code calls for it
  • Old unit hauled away on request

Prefer a callback?

Leave your number and a Roselle appliance installer will call you.

Appliance installation jobs we handle in Roselle

A delivery crew often drops the appliance off and leaves the hookup to you. We pick it up from there in Roselle: old unit out, new one connected to gas, power or water, anchored where it should be, and running before we go.

Dishwasher waiting to be connected

A new dishwasher needs a water supply, a drain with a high loop or air gap and the right power connection. We install it level and fastened in place.

Dishwasher Installation →

Wall oven or cooktop that doesn't fit the cutout

We compare the old opening with the new appliance's drawing and fix the difference before installing.

Oven, Range & Cooktop Installation →

Leaks after a previous install

When an appliance installed by someone else starts leaking, we pull it, check each joint and put it back level and dry.

Dishwasher Installation →

Whole appliance package at once

Bought a full set of new appliances? We install the range, dishwasher, fridge and microwave in one coordinated visit where possible.

Built-in refrigerator that needs an exact fit

A built-in fridge is installed to the maker's cutout, anchored into framing and finished with panels that match the cabinet fronts.

Built-In Refrigerator Installation →

Circuits and gas that may not be ready

A bigger wall oven, a built-in microwave or an induction range may need a new circuit. An electrician handles it before we install.

What the install includes

  • Readiness checkWe compare the installation guide with what your kitchen has.
  • Old appliance disconnectedGas, power or water shut off and the old unit disconnected.
  • Cabinet and counter prepCabinet and counter changes so the new unit fits and is supported.
  • Gas connectionsGas hookup with fresh fittings and a leak check.
  • Electrical connectionsCord or hardwire connection; dedicated circuits are added by an electrician.
  • TestingWe run every appliance before we go.
  • Haul-away and cleanupOld appliances and packaging removed and the area cleaned.

Options to choose from

Install partsNew gas connectors, braided supply lines, cord kits and anti-tip brackets.
Built-in refrigeratorsBuilt-in, column and panel-ready refrigerators, plus undercounter units.
Ranges, wall ovens and cooktopsGas, electric, dual-fuel and induction cooking appliances.
Panels and trim kitsFronts and trim matched to the cabinets around the appliance.
MicrowavesOver-the-range, built-in with trim kit and drawer microwaves.

Kitchens like yours in Roselle: before and after

Kitchen Appliance Installation in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Appliance Installation in a 1980s-1990s two-story colonial / tract house — installedInstalled
Kitchen Appliance Installation in a 1980s-1990s two-story colonial / tract house — detailDetail

Kitchen Appliance Installation in a 1980s two-story, Roselle

A 1980s two-story in Roselle, a typical kitchen for Roselle. Before: almond appliances. What bothered the owners most: decades-old appliances that kept breaking down. After: a new range installed and level, anti-tip bracket in place. On site this meant readiness check, gas connections, plus testing.

Kitchen Appliance Installation project in Bloomingdale, beforeBefore
Kitchen Appliance Installation project in Bloomingdale, afterAfter

Kitchen Appliance Installation in a 1990s two-story colonial, Bloomingdale

This one is a 1990s two-story colonial in Bloomingdale. Before: black appliances. The reason for the call: appliances that needed upgrading. Finished kitchen: a new range installed and level, anti-tip bracket in place. The job covered readiness check, old appliance disconnected, plus gas connections.

Kitchen Appliance Installation in Bloomingdale →
Kitchen Appliance Installation project in Hanover Park, beforeBefore
Kitchen Appliance Installation project in Hanover Park, afterAfter

A Hanover Park two-story colonial from the 1990s: before and after

This one is a two-story colonial from the 1990s in Hanover Park. What we started with: white appliances. The main complaint was tired white appliances that needed replacing. The result: a new range installed and level, anti-tip bracket in place. Work included readiness check, old appliance disconnected, plus haul-away and cleanup.

Kitchen Appliance Installation in Hanover Park →
Kitchen Remodeling project near Roselle, beforeBefore
Kitchen Remodeling project near Roselle, afterAfter

Kitchen Remodeling in a raised ranch, Roselle

Finished: cabinets in light greige with brushed nickel bar pulls, light marble-look quartz counters, a terracotta-look square tile backsplash, black-and-white checkerboard tile flooring and two glass pendants and recessed lights.

Kitchen Remodeling in Roselle →
Kitchen Cabinet Painting project near Roselle, beforeBefore
Kitchen Cabinet Painting project near Roselle, afterAfter

A Roselle 1970s split-level: before and after

The same doors sprayed in deep navy, new satin brass pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Roselle →

How the install goes

  1. Send the model numbersShare the model and the space where it goes.
  2. Readiness checkWe confirm gas, power, water, venting and fit, and list anything that must change.
  3. Written estimateAn itemized estimate for removal, installation, parts and any electrical, plumbing or cabinet work.
  4. Install, test and haul awayWe install, test, clean up and remove the old appliances.

Kitchen Appliance Installation questions from Roselle homeowners

Do you also install range hoods?
Yes, hood installation is a related service; ask us when you book.
Do you haul away old appliances?
Yes. We disconnect, remove and haul away old units; refrigerators go for proper refrigerant recovery.
Can you install a full appliance package?
Yes. We plan the order so the kitchen is back in use quickly.
Will my kitchen need new electrical work?
Sometimes. Wall ovens, induction ranges and built-in microwaves often need dedicated circuits. An electrician checks the panel and adds them.
Do I need a permit for a gas range swap in Roselle?
Usually not for a like-for-like swap; yes for new gas piping. We check before starting.
Roselle contractor registration: do kitchen contractors need it?
Contractors must register with the Village via Cloudpermit and be licensed: surety bond, certificate of insurance naming the Village, $75 fee. We take care of that before work starts.
What happens to the old appliance in Roselle?
Flood Brothers takes one bulk item per week at no charge; appliances (white goods) collected for a fee. If you'd rather not deal with it, we haul old units and debris away.
Roselle building permit for appliance installation: where do I apply?
Permits go through Development & Engineering Services (Building & Zoning), phone 630-671-2821. When your scope needs one, we prepare the application and schedule the inspections.
What does Roselle ask for on electrical work?
Plumbing, electrical and roofing contractors must hold either a state or local license; general contractor and all subs must hold a Village license. New circuits and wiring are done by licensed electricians.
Do I need a permit for appliance installation in Roselle?
It depends on the scope. Roselle's rule in short: Permit required for projects including bathroom and kitchen remodeling, electrical and plumbing work; also water heater, roof, HVAC. We handle the permit when one is needed with Development & Engineering Services (Building & Zoning).
Do you work in my part of Roselle?
Yes. Our crews work across Roselle — ZIP 60172 — and nearby Bloomingdale, Hanover Park, Schaumburg.

Working in Roselle

  • A lot of Roselle kitchens date from the 1970s. We know these layouts well and what is worth keeping.
  • Most Roselle homes are single-family. We protect floors and driveways and leave the site clean every day.
  • We know how Development & Engineering Services (Building & Zoning) handles kitchen permits and pull them for you.

ZIP 60172

Kitchen Appliance Installation nearby

Planning a kitchen project in Roselle?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback