Serving 49 Chicago-area suburbs

Dishwasher Installation in Chicago & the Suburbs

We install new and replacement dishwashers in Chicagoland: water, drain and power connected, the unit leveled, secured and leak-tested.

  • Installers working in the Chicago suburbs, from Naperville to Evanston
  • Hookups by licensed trades where the code calls for it
  • Old unit hauled away on request

Prefer a callback?

Leave your number and a Chicagoland dishwasher installer will call you.

Dishwasher installation problems we solve in Chicagoland

Most dishwasher problems after an install come from three places: a kinked or low drain hose, a fitting that weeps, or a unit that was never fastened to the counter. Our Chicagoland installers connect, level and secure every machine per the maker's instructions and watch it fill and drain.

Water pooling after the last install

Puddles at the front of the dishwasher usually mean a loose supply fitting, a missing gasket on the drain or a unit that isn't level. We find the source and fix the connection.

New unit too tall or too wide for the opening

If the new machine catches on the counter, it can often be lowered on its feet. Where a floor was raised with new tile, we look at other options with you.

Dishwasher that tips out when the door opens

A unit that moves when the door drops is a safety problem and strains the hoses. We anchor it so it stays put.

Old water valve that won't close

When the valve under the sink barely moves or seeps at the stem, we put in a new shutoff so the dishwasher can be isolated if it ever needs service.

Stone or quartz counter with nothing to screw into

Under a stone top, the top mounting clips have nowhere to go. Side brackets into the cabinet walls hold the unit securely without drilling the stone.

Door that rubs the cabinet or won't sit flush

A dishwasher set out of level twists its door, so it scrapes a neighbor or leaves an uneven gap. We level all four feet and line the front up with the cabinets.

New dishwasher sitting in the box

The store delivered it, but nobody connected it. We unbox the unit, check it for shipping damage and install it in the existing opening.

Shared outlet or no dedicated circuit

Many makers call for a dishwasher on its own circuit. If yours shares one with the disposal or counter outlets and trips breakers, an electrician adds a dedicated line.

What we hook up and check

  • Opening and connection checkWidth, height and depth checked, plus the state of the valve, drain and circuit.
  • Old dishwasher outWater and power off, the old machine disconnected and pulled without scratching the floor.
  • Shutoff valve replaced if neededNew shutoff under the sink when the old one won't close fully.
  • Water supply connectionBraided supply line and the right elbow fitting connected to the inlet valve.
  • Drain hose with high loop or air gapDrain hose routed in a high loop or to an air gap, depending on local code, then tied into the disposal or drain.
  • Leveling and securingLeveled front to back and side to side, then anchored with top or side brackets.
  • Test cycle and haul-awayA test fill and drain with the cabinet open, then the old unit and packaging removed.

Options to choose from

Standard 24-inch built-in dishwashersThe usual size for American kitchens, installed under the counter between cabinets.
Compact 18-inch modelsSlim units that fit where a full-width dishwasher won't.
Panel-ready and integrated unitsMachines finished with a custom front matched to your cabinet doors.
Top-control and front-control stylesHidden top controls give a clean front; front controls show the panel and status at a glance.
Air gaps and drain partsCounter or sink-mounted air gaps where code calls for them, plus disposal and tailpiece connectors.

Dishwasher Installation across Chicagoland

The same job looks different in a 1920s bungalow, a 1970s split-level and a new subdivision. Here is what we plan for in different parts of the region.

Prewar towns

Tight openings and old plumbing in older homes

Houses this old can hide brittle valves and cramped sink bases. We plan fittings and clearances ahead so install day has no surprises.

Evanston, Berwyn, Oak Park

Dishwasher Installation: before and after

Dishwasher Installation — beforeBefore
Dishwasher Installation — afterAfter

Before and after: a 1980s two-story in Itasca

A 1980s two-story in Itasca, a typical kitchen for Itasca. The kitchen as it was: almond appliances and white cast-iron double sink. The reason for the call: a decades-old dishwasher that was loud and leaking. After: a new stainless dishwasher installed flush with the cabinets. On site this meant opening and connection check, drain hose with high loop or air gap, plus test cycle and haul-away.

Dishwasher Installation in Itasca →
Dishwasher Installation — beforeBefore
Dishwasher Installation — afterAfter

A Skokie two-story colonial from the 1990s: before and after

A two-story colonial from the 1990s in Skokie, a typical kitchen for Skokie. Before: white appliances and white double sink. The main complaint was a worn-out dishwasher that left dishes dirty. The result: a new stainless dishwasher installed flush with the cabinets. On site this meant opening and connection check, drain hose with high loop or air gap, plus test cycle and haul-away.

Dishwasher Installation in Skokie →
Dishwasher Installation — beforeBefore
Dishwasher Installation — afterAfter

A Berwyn prewar foursquare: before and after

The site: a prewar foursquare near Ogden Avenue. The kitchen as it was: an almond range and refrigerator and stainless double sink under a window. The main complaint was an old dishwasher that had stopped cleaning. The result: a new stainless dishwasher installed flush with the cabinets. The job covered water supply connection, drain hose with high loop or air gap, plus leveling and securing.

Dishwasher Installation in Berwyn →

Install day

  1. Tell us about the unitSend the model number and a photo of the opening and the plumbing under the sink.
  2. Fit and connection checkA quick check of clearances and connections so the right parts come along.
  3. Written estimateA clear written quote, with extras like a new shutoff or an electrician listed separately.
  4. Install and testWe install, test for leaks and drainage, clean up and haul the old machine away.

Dishwasher Installation: common questions

How do you secure a dishwasher under a granite or quartz counter?
Stone counters get side brackets instead of top clips, so the unit stays put without drilling.
Is it worth paying for dishwasher installation?
A dishwasher combines water, drain and electrical work under your counters. A poor connection can leak into the cabinet and subfloor for weeks before anyone notices.
Do you install panel-ready dishwashers?
Yes. We install the machine and mount the custom panel, then adjust the door springs for the panel weight.
Does a dishwasher need its own circuit?
It depends on the model and your wiring. Sharing a circuit with a disposal or other appliances can trip breakers.
How much does dishwasher installation cost?
A simple replacement and a first-time install are priced very differently. We look at the kitchen and send a line-item quote.
Which towns do you serve?
Chicago and 49 suburbs, from Naperville and Aurora to Evanston, Schaumburg and Orland Park. Pick your town below for local details and ZIP codes.

Questions about dishwasher installation?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback