Serving Northbrook & nearby Glenview, Highland Park

Kitchen Appliance Installation in Northbrook, IL

New range, dishwasher, built-in fridge or microwave? We install kitchen appliances in Northbrook and take the old ones away.

  • Serving Northbrook ZIP 60062
  • Installed level, sealed and tested before we leave
  • Clear price for the install before the visit

Prefer a callback?

Leave your number and a Northbrook appliance installer will call you.

Appliance installation jobs we handle in Northbrook

Our Northbrook crews install dishwashers, gas and electric ranges, wall ovens, cooktops, built-in refrigerators and microwaves, whether you bought them from a big-box store, a local dealer or online. Each one goes in level, secured and checked before we leave.

Built-in refrigerator that needs an exact fit

We measure the opening, secure the unit and align the panels so the fridge looks like part of the cabinetry.

Built-In Refrigerator Installation →

Over-the-range microwave replacing a hood

We install over-the-range microwaves fastened into studs, aligned with the cabinet and vented the way your kitchen allows.

Microwave Installation →

Whole appliance package at once

We install a full kitchen appliance package, checking each hookup before any unit goes in.

Circuits and gas that may not be ready

Gas lines, 240-volt circuits, water valves and vent paths are checked up front, so you know what's ready and what isn't.

Wall oven or cooktop that doesn't fit the cutout

New wall ovens and cooktops often need a slightly different opening. We adjust the cabinet or counter to the maker's cutout spec.

Oven, Range & Cooktop Installation →

Built-in or drawer microwave

A microwave drawer in an island or a trim-kit model in a wall cabinet both depend on an exact cutout. We fit and secure them.

Microwave Installation →

Dishwasher waiting to be connected

We take a boxed dishwasher to a finished install: old unit out, new one connected, secured and checked for leaks.

Dishwasher Installation →

Included with the install

  • Readiness checkModel numbers matched against your gas, power, water, venting and the opening.
  • Cabinet and counter prepCabinet and counter changes so the new unit fits and is supported.
  • Gas connectionsGas hookup with fresh fittings and a leak check.
  • Water and drain connectionsSupply lines, drains, high loops or air gaps per code.
  • Anchoring and levelingEach unit secured and leveled so doors close and nothing tips.
  • TestingWe run every appliance before we go.
  • Haul-away and cleanupWe take the old units and cartons with us.

What to pick before the install

Panels and trim kitsCustom panels and trim kits that make appliances look built in.
MicrowavesOver-the-range, built-in with trim kit and drawer microwaves.
Built-in refrigeratorsFridges designed to sit flush in a cabinet opening.
Ranges, wall ovens and cooktopsGas, electric, dual-fuel and induction cooking appliances.
Install partsNew gas connectors, braided supply lines, cord kits and anti-tip brackets.

Kitchen Appliance Installation before and after — Northbrook homes

Kitchen Appliance Installation in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Appliance Installation in a 1980s-1990s two-story colonial / tract house — installedInstalled
Kitchen Appliance Installation in a 1980s-1990s two-story colonial / tract house — detailDetail

Northbrook kitchen, 1980s two-story: kitchen appliance installation

A 1980s two-story near Downtown Northbrook, a typical kitchen for Northbrook. The kitchen as it was: black appliances. What bothered the owners most: appliances that needed upgrading. After: a new range installed and level, anti-tip bracket in place. On site this meant readiness check, cabinet and counter prep, plus water and drain connections.

Kitchen Appliance Installation project in Glenview, beforeBefore
Kitchen Appliance Installation project in Glenview, afterAfter

Glenview kitchen, two-story colonial from the 1990s: kitchen appliance installation

A two-story colonial from the 1990s near The Grove, a typical kitchen for Glenview. The kitchen as it was: white appliances. What bothered the owners most: tired white appliances that needed replacing. Finished kitchen: a new range installed and level, anti-tip bracket in place. Work included readiness check, gas connections, plus anchoring and leveling.

Kitchen Appliance Installation in Glenview →
Kitchen Appliance Installation project in Mount Prospect, beforeBefore
Kitchen Appliance Installation project in Mount Prospect, afterAfter

A Mount Prospect 1980s two-story: before and after

This one is a 1980s two-story in Mount Prospect. What we started with: almond appliances. The main complaint was decades-old appliances that kept breaking down. Finished kitchen: a new range installed and level, anti-tip bracket in place. The job covered anchoring and leveling, testing, plus haul-away and cleanup.

Kitchen Appliance Installation in Mount Prospect →
Kitchen Remodeling project near Northbrook, beforeBefore
Kitchen Remodeling project near Northbrook, afterAfter

A Northbrook postwar Cape Cod: before and after

What changed: cabinets in forest green with matte black pulls, black honed granite counters, a green zellige-look tile backsplash, warm oak luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.

Kitchen Remodeling in Northbrook →
Kitchen Cabinet Painting project near Northbrook, beforeBefore
Kitchen Cabinet Painting project near Northbrook, afterAfter

Northbrook kitchen, 1960s ranch: kitchen cabinet painting

Finished: the same doors sprayed in deep navy, new satin brass pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Northbrook →

How the install goes

  1. Send the model numbersShare the model and the space where it goes.
  2. Readiness checkWe confirm gas, power, water, venting and fit, and list anything that must change.
  3. Written estimateAn itemized estimate for removal, installation, parts and any electrical, plumbing or cabinet work.
  4. Install, test and haul awayWe install, test, clean up and remove the old appliances.

Kitchen Appliance Installation questions from Northbrook homeowners

Is the install done to the manufacturer's instructions?
We follow the installation guide for each model, which is also what manufacturers expect.
Do you install appliances I bought from another store?
Yes. We install appliances from big-box stores, local dealers and online sellers.
Do you haul away old appliances?
We do. The old appliances leave with us.
Can you install a full appliance package?
Yes. We plan the order so the kitchen is back in use quickly.
How much does appliance installation cost?
A simple swap and an install with new circuits or gas lines are priced very differently. You get a line-item quote.
Northbrook building permit for appliance installation: where do I apply?
Permits go through Development & Planning Services, phone 847-664-4050. When your scope needs one, we prepare the application and schedule the inspections.
Does Northbrook require a licensed electrician for appliance installation?
Electrical contractor license $70; must submit a copy of a valid electrician's registration with the application. New circuits and wiring are done by licensed electricians.
Do I need a Northbrook-registered contractor for appliance installation?
Village contractor license required, good for one year: general contractors $100; electrical $70. We take care of that before work starts.
What happens to the old appliance in Northbrook?
One bulk item per week at the curb free; white goods (stoves, refrigerators, dishwashers) handled separately, $30 each, scheduled with LRS at 844.633.3577. If you'd rather not deal with it, we haul old units and debris away.
Do I need a permit for appliance installation in Northbrook?
It depends on the scope. Northbrook's rule in short: Village lists separate permit types: Single Family Alterations - Interior, Electrical (new wiring/outlets), and Plumbing (new fixtures). We handle the permit when one is needed with Development & Planning Services.
Do you work in my part of Northbrook?
Yes. Our crews work across Northbrook, including Techny, Downtown Northbrook — ZIP 60062 — and nearby Glenview, Highland Park, Mount Prospect.

Working in Northbrook

  • A lot of Northbrook kitchens date from the 1970s. We know these layouts well and what is worth keeping.
  • Most Northbrook homes are single-family. We protect floors and driveways and leave the site clean every day.
  • We know how Development & Planning Services handles kitchen permits and pull them for you.

TechnyDowntown Northbrook

ZIP 60062

Kitchen Appliance Installation nearby

Planning a kitchen project in Northbrook?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback