Dishwasher waiting to be connected
We take a boxed dishwasher to a finished install: old unit out, new one connected, secured and checked for leaks.
Dishwasher Installation →Serving Park Ridge & nearby Des Plaines, Glenview
Kitchen Appliance Installation in Park Ridge, IL
New range, dishwasher, built-in fridge or microwave? We install kitchen appliances in Park Ridge and take the old ones away.
- Serving Park Ridge ZIP 60068
- Installed level, sealed and tested before we leave
- Clear price for the install before the visit
Appliance installation jobs we handle in Park Ridge
Our Park Ridge crews install dishwashers, gas and electric ranges, wall ovens, cooktops, built-in refrigerators and microwaves, whether you bought them from a big-box store, a local dealer or online. Each one goes in level, secured and checked before we leave.
Over-the-range microwave replacing a hood
We install over-the-range microwaves fastened into studs, aligned with the cabinet and vented the way your kitchen allows.
Microwave Installation →Range that rocks or tips
A range without its anti-tip bracket can tip forward with weight on the door. We install the bracket and check it's engaged.
Oven, Range & Cooktop Installation →Circuits and gas that may not be ready
Gas lines, 240-volt circuits, water valves and vent paths are checked up front, so you know what's ready and what isn't.
Leaks after a previous install
When an appliance installed by someone else starts leaking, we pull it, check each joint and put it back level and dry.
Dishwasher Installation →Built-in or drawer microwave
A microwave drawer in an island or a trim-kit model in a wall cabinet both depend on an exact cutout. We fit and secure them.
Microwave Installation →Switching to induction
Going from gas to induction means a new circuit and a capped gas line. We check whether your panel can handle it first.
Oven, Range & Cooktop Installation →New gas range needs a hookup
A gas range swap includes a new connector, a leak test, an anti-tip bracket and a burner check. We do all of it.
Oven, Range & Cooktop Installation →Included with the install
- Old appliance disconnectedWe isolate supplies and unhook the old appliance safely.
- Gas connectionsGas hookup with fresh fittings and a leak check.
- Electrical connectionsCord or hardwire connection; dedicated circuits are added by an electrician.
- Water and drain connectionsSupply lines, drains, high loops or air gaps per code.
- Anchoring and levelingAnti-tip brackets, mounting clips and leveling legs set per the instructions.
- TestingBurners lit, elements heated, cycles run and joints checked for leaks.
- Haul-away and cleanupOld appliances and packaging removed and the area cleaned.
Models, parts and fittings
MicrowavesOver-the-range, built-in with trim kit and drawer microwaves.
Install partsFresh connection parts instead of reused old ones.
Panels and trim kitsFronts and trim matched to the cabinets around the appliance.
Ranges, wall ovens and cooktopsGas, electric, dual-fuel and induction cooking appliances.
Built-in refrigeratorsBuilt-in, column and panel-ready refrigerators, plus undercounter units.
What the work looks like in Park Ridge homes
Before
Installed
DetailA Park Ridge two-story colonial from the 1990s: before and after
A two-story colonial from the 1990s in Park Ridge, a typical kitchen for Park Ridge. Before: white appliances. What bothered the owners most: old appliances that no longer worked well. After: a new range installed and level, anti-tip bracket in place. Work included electrical connections, testing, plus haul-away and cleanup.
Before
AfterDes Plaines kitchen, two-story colonial from the 1990s: kitchen appliance installation
The site: a two-story colonial from the 1990s in Des Plaines. The kitchen as it was: almond appliances. What bothered the owners most: decades-old appliances that kept breaking down. Finished kitchen: a new range installed and level, anti-tip bracket in place. On site this meant electrical connections, water and drain connections, plus anchoring and leveling.
Kitchen Appliance Installation in Des Plaines →
Before
AfterKitchen Remodeling in a postwar Cape Cod, Park Ridge
Finished: cabinets in forest green with matte black pulls, black honed granite counters, a green zellige-look tile backsplash, warm oak luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.
Kitchen Remodeling in Park Ridge →
Before
AfterPark Ridge kitchen, postwar bi-level: kitchen cabinet painting
The same doors sprayed in light warm taupe, new unlacquered brass knobs and cup pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Park Ridge →
Before
AfterCabinet Refacing in a postwar bi-level, Park Ridge
What changed: new five-piece shaker doors in forest green on the existing boxes, matching face-frame veneer and unlacquered brass knobs and cup pulls.
Cabinet Refacing in Park Ridge →From the old unit to the new one
- Send the model numbersShare the model and the space where it goes.
- Readiness checkA check of every connection the new appliance needs.
- Written estimateA clear written quote listing each appliance and any prep work.
- Install, test and haul awayOld units out, new ones connected, secured, tested and the old ones taken away.
Kitchen Appliance Installation questions from Park Ridge homeowners
Can you install a full appliance package?
Yes. We plan the order so the kitchen is back in use quickly.
Will my kitchen need new electrical work?
Older homes may need a new circuit or more panel capacity for some appliances. We find out early.
Who should connect a gas appliance?
A qualified, licensed installer, following local code and the maker's instructions, with a leak test afterward.
How long does appliance installation take?
Most single installs are done in one visit; bigger jobs are scheduled in steps.
How much does appliance installation cost?
Appliance type, connections, cabinet changes and haul-away drive the price. We put it in writing first.
Do I need a Park Ridge-registered contractor for appliance installation?
Building contractors must register with the City each calendar year ($50 per firm). We take care of that before work starts.
Do I need a permit for appliance installation in Park Ridge?
It depends on the scope. Park Ridge's rule in short: Park Ridge publishes permit guidelines by project type; contact the Permit Technicians to confirm whether a kitchen project needs a permit. We handle the permit when one is needed.
Do you work in my part of Park Ridge?
Yes. Our crews work across Park Ridge — ZIP 60068 — and nearby Des Plaines, Glenview, Skokie.
Working in Park Ridge
- A lot of Park Ridge kitchens date from the 1950s. We know these layouts well and what is worth keeping.
- Most Park Ridge homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Park Ridge building department handles kitchen permits and pull them for you.
ZIP 60068
Kitchen Appliance Installation nearby
Other kitchen services in Park Ridge
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Kitchen Backsplash InstallationTile backsplashes with clean lines and flush outlets.