Serving Evanston & nearby Skokie, Glenview

Kitchen Appliance Installation in Evanston, IL

New range, dishwasher, built-in fridge or microwave? We install kitchen appliances in Evanston and take the old ones away.

  • Serving Evanston ZIP 60201, 60202, 60208
  • Installed level, sealed and tested before we leave
  • Clear price for the install before the visit

Prefer a callback?

Leave your number and a Evanston appliance installer will call you.

Appliance installation jobs we handle in Evanston

Getting a new appliance into the kitchen is the easy part. In Evanston we check what's behind it first: the gas shutoff, the circuit, the water valve, the drain and the size of the opening. Then we connect it per the maker's instructions, test it and haul the old unit away.

Older homes with older connections

Older wiring and plumbing usually still work, but valves and connectors get a close look before a new appliance goes in.

Condo deliveries and building rules

Condo installs come with elevator bookings, insurance paperwork and work hours. We handle them with management.

New gas range needs a hookup

Gas connections should be made by a qualified installer to local code. We fit a new connector, leak-test it and install the anti-tip bracket.

Oven, Range & Cooktop Installation →

Over-the-range microwave replacing a hood

An over-the-range microwave hangs on a wall plate and the cabinet above, and vents outside or recirculates. We mount it and connect the venting.

Microwave Installation →

Whole appliance package at once

A complete appliance swap goes faster when one crew handles every connection. We plan the order and haul the old set away.

Old appliances that need to go

We remove old units with the floors protected; refrigerators go for proper refrigerant recovery and recycling.

Kitchen Appliance Removal →

Leaks after a previous install

When an appliance installed by someone else starts leaking, we pull it, check each joint and put it back level and dry.

Dishwasher Installation →

What we hook up and check

  • Readiness checkWe compare the installation guide with what your kitchen has.
  • Old appliance disconnectedGas, power or water shut off and the old unit disconnected.
  • Gas connectionsNew connector, made by a qualified installer per local code and leak-tested.
  • Electrical connectionsPower matched to the appliance, with panel and circuit work by an electrician.
  • Water and drain connectionsWater and drain hooked up with new lines and fittings.
  • Anchoring and levelingEach unit secured and leveled so doors close and nothing tips.
  • TestingBurners lit, elements heated, cycles run and joints checked for leaks.

Models, parts and fittings

Install partsNew gas connectors, braided supply lines, cord kits and anti-tip brackets.
Ranges, wall ovens and cooktopsGas, electric, dual-fuel and induction cooking appliances.
DishwashersBuilt-in dishwashers of any size and control style.
Panels and trim kitsCustom panels and trim kits that make appliances look built in.
MicrowavesMicrowaves mounted over the range or set into cabinets.

Kitchen Appliance Installation before and after — Evanston homes

Kitchen Appliance Installation in a prewar house — beforeBefore
Kitchen Appliance Installation in a prewar house — installedInstalled
Kitchen Appliance Installation in a prewar house — detailDetail

Evanston kitchen, 1920s bungalow: kitchen appliance installation

The site: a 1920s bungalow in Evanston. Before: white enamel gas range and a white refrigerator. What bothered the owners most: tired white appliances that needed replacing. After: a new range installed and level, anti-tip bracket in place. The job covered old appliance disconnected, electrical connections, plus testing.

Kitchen Appliance Installation project in Skokie, beforeBefore
Kitchen Appliance Installation project in Skokie, afterAfter

Skokie kitchen, 1990s two-story colonial: kitchen appliance installation

This one is a 1990s two-story colonial in Skokie. The kitchen as it was: white appliances. The reason for the call: old appliances that no longer worked well. After: a new range installed and level, anti-tip bracket in place. On site this meant old appliance disconnected, water and drain connections, plus anchoring and leveling.

Kitchen Appliance Installation in Skokie →
Kitchen Appliance Installation project in Northbrook, beforeBefore
Kitchen Appliance Installation project in Northbrook, afterAfter

Kitchen Appliance Installation in a 1990s two-story colonial, Northbrook

The site: a 1990s two-story colonial near Downtown Northbrook. Before: black appliances. What bothered the owners most: new appliances waiting to be connected. The result: a new range installed and level, anti-tip bracket in place. On site this meant readiness check, old appliance disconnected, plus water and drain connections.

Kitchen Appliance Installation in Northbrook →
Kitchen Remodeling project near Evanston, beforeBefore
Kitchen Remodeling project near Evanston, afterAfter

Before and after: a 1920s bungalow in Evanston

Soft sage-green inset-style cabinets with unlacquered brass hardware, honed white marble-look quartz counters, a white handmade-look square tile backsplash, restored oak strip floor and schoolhouse pendant lights.

Kitchen Remodeling in Evanston →
Kitchen Cabinet Painting project near Evanston, beforeBefore
Kitchen Cabinet Painting project near Evanston, afterAfter

Kitchen Cabinet Painting in a prewar foursquare, Evanston

Finished: the same doors sprayed in soft white, new matte black pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Evanston →

Install day

  1. Send the model numbersShare the model and the space where it goes.
  2. Readiness checkWe confirm gas, power, water, venting and fit, and list anything that must change.
  3. Written estimateAn itemized estimate for removal, installation, parts and any electrical, plumbing or cabinet work.
  4. Install, test and haul awayWe install, test, clean up and remove the old appliances.

Kitchen Appliance Installation questions from Evanston homeowners

Can you install appliances in a condo?
We do condo installs, coordinated with management.
Is the install done to the manufacturer's instructions?
We follow the installation guide for each model, which is also what manufacturers expect.
How much does appliance installation cost?
A simple swap and an install with new circuits or gas lines are priced very differently. You get a line-item quote.
Will my kitchen need new electrical work?
Older homes may need a new circuit or more panel capacity for some appliances. We find out early.
Do you also install range hoods?
We do. Tell us about the hood when you send the other model numbers.
What does Evanston ask for on electrical work?
Electrical contractors must register and submit a copy of an electrical license from a testing municipality (or state license if state-regulated). Electrician must be on site for electrical rough inspections. New circuits and wiring are done by licensed electricians.
Do I need a Evanston-registered contractor for appliance installation?
All contractors working in city limits must register with the City; annual fee General Contractor $150, Trade Contractor $125. We take care of that before work starts.
Can you do appliance installation in an Evanston condo?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
What happens to the old appliance in Evanston?
Appliances and tires are not collected in regular bulk pickup; call 311 or 847-448-4311 to arrange free removal. If you'd rather not deal with it, we haul old units and debris away.
Evanston building permit for appliance installation: where do I apply?
Permits go through Community Development Department, Building & Development Services (Building & Inspection Services), phone (847) 448-4311. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for appliance installation in Evanston?
It depends on the scope. Evanston's rule in short: Residential permit applications go through the Citizen Portal; City worksheets signed by the contractors are required for any electrical, plumbing or HVAC work. We handle the permit when one is needed with Community Development Department, Building & Development Services (Building & Inspection Services).
Do you work in my part of Evanston?
Yes. Our crews work across Evanston — ZIP 60201, 60202, 60208 — and nearby Skokie, Glenview, Park Ridge.

Working in Evanston

  • Most Evanston homes are prewar. We work around plaster walls, radiators and out-of-square rooms every week.
  • Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.
  • Live in a historic district? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.

ZIP 60201ZIP 60202ZIP 60208

Kitchen Appliance Installation nearby

Planning a kitchen project in Evanston?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback