Serving 49 Chicago-area suburbs

Oven, Range & Cooktop Installation in Chicago & the Suburbs

We install gas and electric ranges, wall ovens and cooktops in Chicagoland, connected safely, leveled and checked before we go.

  • Installers working in the Chicago suburbs, from Naperville to Evanston
  • Hookups by licensed trades where the code calls for it
  • Old unit hauled away on request

Prefer a callback?

Leave your number and a Chicagoland range and oven installer will call you.

Range, oven and cooktop installs we handle in Chicagoland

Gas ranges, slide-in electrics, induction cooktops and double wall ovens each need something different behind them: a gas shutoff and connector, a 240-volt circuit of the right size, or an exact cabinet cutout. Our Chicagoland installers sort out what your kitchen has and what the new appliance needs.

Electric range with a mismatched cord or outlet

Older homes may have a three-prong range outlet while new ranges are set up for four-wire. We fit the correct cord for your wiring per the maker's instructions.

Wall oven doesn't fit the old cabinet

If the new wall oven is too tall or too deep for the old box, we rework the cabinet opening and add a support shelf rated for the weight.

Switching from electric to gas

Electric-to-gas conversions are a small plumbing project. The new line is installed under permit, and the old 240-volt outlet is dealt with safely.

Downdraft or venting questions

If the old hood is too small or only recirculates, a new range may be the moment to upgrade the ventilation as well.

Range that tips forward when the oven door opens

Missing anti-tip brackets are common on older installs. We fasten one to the floor or wall and check it holds before we leave.

Cooktop cutout in the wrong size

If the new cooktop is bigger than the old one, the counter has to be cut; if it's smaller, a filler kit or new counter section may be required.

Double wall oven on an undersized circuit

A double oven can draw far more than a single unit. An electrician checks the panel and runs a circuit sized to the nameplate before we install it.

New range delivered but not hooked up

A range sitting in the kitchen with no hookup is a frequent call. We bring the connector and bracket and get it cooking the same visit.

Included with the install

  • Supply and opening checkWe look at the gas shutoff or circuit, measure the opening and compare it to the new unit's specs.
  • Disconnecting the old applianceGas or power off, the old range, oven or cooktop disconnected and removed.
  • Cabinet and counter adjustmentsWall oven boxes and cooktop cutouts resized to the maker's spec when needed.
  • Gas connectionNew flexible connector and fittings on the shutoff, made by a qualified installer to local code and leak-tested.
  • Anti-tip bracket and levelingAnti-tip bracket fastened and engaged, range leveled side to side and front to back.
  • Wall oven and cooktop mountingWall ovens fastened into the cabinet; cooktops set and clamped into the counter.
  • Haul-away and cleanupWe remove the old unit, cartons and debris.

What to pick before the install

Pro-style rangesWide, heavy ranges with high-output burners and specific gas and clearance needs.
Single and double wall ovensWall ovens need the right cutout, support and a dedicated circuit.
Induction cooktops and rangesElectric cooking with quick response and a cool glass top around the pan.
Freestanding rangesThe standard range type that stands between cabinets or at the end of a run.
Gas, electric and dual-fuelPick the fuel by what you cook and what your kitchen has; dual-fuel combines both.

Oven, Range & Cooktop Installation across Chicagoland

The same job looks different in a 1920s bungalow, a 1970s split-level and a new subdivision. Here is what we plan for in different parts of the region.

Prewar towns

Gas lines in older homes

Old gas piping usually still works, but the stop valve and fittings at the range get a careful look before anything new is connected.

Berwyn, Evanston, Oak Park

Oven, Range & Cooktop Installation: before and after

Oven, Range & Cooktop Installation — beforeBefore
Oven, Range & Cooktop Installation — afterAfter

An Elmhurst two-story colonial from the 1990s: before and after

The site: a two-story colonial from the 1990s in Elmhurst. The kitchen as it was: black appliances. What bothered the owners most: a new range waiting to be connected. After: a new stainless range installed level with a new gas connector. On site this meant disconnecting the old appliance, gas connection, plus wall oven and cooktop mounting.

Oven, Range & Cooktop Installation in Elmhurst →
Oven, Range & Cooktop Installation — beforeBefore
Oven, Range & Cooktop Installation — afterAfter

A Wood Dale 1990s two-story colonial: before and after

The site: a 1990s two-story colonial in Wood Dale. The kitchen as it was: white appliances. The main complaint was a new range waiting to be connected. After: a new stainless range installed level with a new gas connector. Work included supply and opening check, cabinet and counter adjustments, plus anti-tip bracket and leveling.

Oven, Range & Cooktop Installation in Wood Dale →
Oven, Range & Cooktop Installation — beforeBefore
Oven, Range & Cooktop Installation — afterAfter

A Winfield 1980s two-story: before and after

A 1980s two-story in Winfield, a typical kitchen for Winfield. Before: almond appliances. The reason for the call: an old range they no longer trusted. Finished kitchen: a new stainless range installed level with a new gas connector. On site this meant cabinet and counter adjustments, anti-tip bracket and leveling, plus haul-away and cleanup.

Oven, Range & Cooktop Installation in Winfield →

From the old unit to the new one

  1. Model and photosTell us what you're installing, and show us the current hookup.
  2. Readiness checkWe compare your kitchen with the installation guide and list what needs to change.
  3. Written estimateAn itemized estimate for removal, installation, parts and any gas line or electrical work.
  4. Install and testOld unit out, new one connected, anchored, leveled and tested burner by burner.

Install questions

Does a wall oven need its own circuit?
They do. If your circuit is undersized for the new oven, an electrician upgrades it before installation.
Do I need a permit to install a gas range in Chicagoland?
It depends on the work. New gas piping requires a permit, while connecting to an existing shutoff often does not. We find out for your address.
Can you install a wall oven in my existing cabinet?
Usually, with some adjustment. We compare the maker's cutout drawing to your cabinet first.
Can a gas range be converted to propane?
Often yes, using the maker's LP kit. The orifices and regulator are changed, then the burners are tested.
Will you haul away my old stove?
Yes, haul-away is available with any installation.
Which towns do you serve?
Chicago and 49 suburbs, from Naperville and Aurora to Evanston, Schaumburg and Orland Park. Pick your town below for local details and ZIP codes.

Questions about oven, range & cooktop installation?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback