Serving Arlington Heights & nearby Mount Prospect, Palatine

Kitchen Appliance Installation in Arlington Heights, IL

New range, dishwasher, built-in fridge or microwave? We install kitchen appliances in Arlington Heights and take the old ones away.

  • Serving Arlington Heights ZIP 60004, 60005
  • Installed level, sealed and tested before we leave
  • Clear price for the install before the visit

Prefer a callback?

Leave your number and a Arlington Heights appliance installer will call you.

Appliance installation jobs we handle in Arlington Heights

A delivery crew often drops the appliance off and leaves the hookup to you. We pick it up from there in Arlington Heights: old unit out, new one connected to gas, power or water, anchored where it should be, and running before we go.

Condo deliveries and building rules

Condo installs come with elevator bookings, insurance paperwork and work hours. We handle them with management.

Built-in refrigerator that needs an exact fit

We measure the opening, secure the unit and align the panels so the fridge looks like part of the cabinetry.

Built-In Refrigerator Installation →

Wall oven or cooktop that doesn't fit the cutout

Cutout sizes change between models, so a replacement oven or cooktop may need the cabinet or counter reworked. We handle it.

Oven, Range & Cooktop Installation →

Leaks after a previous install

Water under the dishwasher or behind the fridge usually comes from one bad fitting. We find it, redo the connection and test it.

Dishwasher Installation →

Whole appliance package at once

We install a full kitchen appliance package, checking each hookup before any unit goes in.

Dishwasher waiting to be connected

A new dishwasher needs a water supply, a drain with a high loop or air gap and the right power connection. We install it level and fastened in place.

Dishwasher Installation →

Ice maker with no water line

If your new fridge has an ice maker and there's no supply behind it, a line has to be run. We connect it with an accessible shutoff.

Built-In Refrigerator Installation →

What we hook up and check

  • Old appliance disconnectedGas, power or water shut off and the old unit disconnected.
  • Gas connectionsGas hookup with fresh fittings and a leak check.
  • Electrical connectionsCord or hardwire connection; dedicated circuits are added by an electrician.
  • Water and drain connectionsSupply lines, drains, high loops or air gaps per code.
  • Anchoring and levelingAnti-tip brackets, mounting clips and leveling legs set per the instructions.
  • TestingWe run every appliance before we go.
  • Haul-away and cleanupWe take the old units and cartons with us.

Options to choose from

DishwashersStandard, compact and panel-ready dishwashers.
Built-in refrigeratorsFridges designed to sit flush in a cabinet opening.
Ranges, wall ovens and cooktopsGas, electric, dual-fuel and induction cooking appliances.
Panels and trim kitsFronts and trim matched to the cabinets around the appliance.
Install partsFresh connection parts instead of reused old ones.

Kitchens like yours in Arlington Heights: before and after

Kitchen Appliance Installation in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Appliance Installation in a 1980s-1990s two-story colonial / tract house — installedInstalled
Kitchen Appliance Installation in a 1980s-1990s two-story colonial / tract house — detailDetail

Before and after: a 1980s two-story in Arlington Heights

This one is a 1980s two-story in Arlington Heights. What we started with: black appliances. What bothered the owners most: appliances that needed upgrading. After: a new range installed and level, anti-tip bracket in place. The job covered water and drain connections, anchoring and leveling, plus haul-away and cleanup.

Kitchen Appliance Installation project in Mount Prospect, beforeBefore
Kitchen Appliance Installation project in Mount Prospect, afterAfter

Kitchen Appliance Installation in a 1990s two-story colonial, Mount Prospect

This one is a 1990s two-story colonial in Mount Prospect. The kitchen as it was: almond appliances. What bothered the owners most: decades-old appliances that kept breaking down. Finished kitchen: a new range installed and level, anti-tip bracket in place. On site this meant gas connections, anchoring and leveling, plus testing.

Kitchen Appliance Installation in Mount Prospect →
Kitchen Appliance Installation project in Palatine, beforeBefore
Kitchen Appliance Installation project in Palatine, afterAfter

Kitchen Appliance Installation in a 1990s two-story colonial, Palatine

The site: a 1990s two-story colonial in Palatine. The kitchen as it was: white appliances. The reason for the call: old appliances that no longer worked well. After: a new range installed and level, anti-tip bracket in place. The job covered electrical connections, anchoring and leveling, plus haul-away and cleanup.

Kitchen Appliance Installation in Palatine →
Kitchen Remodeling project near Arlington Heights, beforeBefore
Kitchen Remodeling project near Arlington Heights, afterAfter

Kitchen Remodeling in a postwar Cape Cod, Arlington Heights

What changed: cabinets in dark teal with brushed nickel bar pulls, charcoal concrete-look quartz counters, a white 2x8 tile in a vertical stack backsplash, hickory luxury vinyl plank flooring and recessed lights and under-cabinet LED strips.

Kitchen Remodeling in Arlington Heights →
Kitchen Cabinet Painting project near Arlington Heights, beforeBefore
Kitchen Cabinet Painting project near Arlington Heights, afterAfter

Kitchen Cabinet Painting in a 1960s ranch, Arlington Heights

What changed: the same doors sprayed in pale sage, new polished nickel pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Arlington Heights →

From the old unit to the new one

  1. Send the model numbersShare the model and the space where it goes.
  2. Readiness checkWe confirm gas, power, water, venting and fit, and list anything that must change.
  3. Written estimateA clear written quote listing each appliance and any prep work.
  4. Install, test and haul awayOld units out, new ones connected, secured, tested and the old ones taken away.

Kitchen Appliance Installation questions from Arlington Heights homeowners

Can you install appliances in a condo?
Yes. We follow building rules, book the elevator and provide insurance paperwork.
How long does appliance installation take?
A single swap often takes a few hours. A full package, or installs with cabinet, gas or electrical changes, take longer.
Do you also install range hoods?
We handle venting for over-the-range microwaves, and range hoods have their own service page.
Is the install done to the manufacturer's instructions?
We follow the installation guide for each model, which is also what manufacturers expect.
Can you install a full appliance package?
We do. One crew handles every hookup.
Arlington Heights contractor registration: do kitchen contractors need it?
The Village of Arlington Heights contractor license number must be listed on permit applications; homeowners doing their own work file a Homeowner as General Contractor form. We take care of that before work starts.
Does Arlington Heights require a licensed electrician for appliance installation?
Electrical permit application must include a copy of the electrical license. New circuits and wiring are done by licensed electricians.
Does appliance installation need a Arlington Heights building permit, and who files it?
Permits go through Building & Life Safety Department, phone (847) 368-5560. When your scope needs one, we prepare the application and schedule the inspections.
Do Arlington Heights condo associations need to approve appliance installation?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
Do I need a permit for appliance installation in Arlington Heights?
It depends on the scope. Arlington Heights's rule in short: Remodel permit applications (shown here via a basement remodel checklist dated 2020) require a building permit application, plans and a contractor proposal; plumbing and electrical permit applications are added if applicable. We handle the permit when one is needed with Building & Life Safety Department.
Do you work in my part of Arlington Heights?
Yes. Our crews work across Arlington Heights — ZIP 60004, 60005 — and nearby Mount Prospect, Palatine, Buffalo Grove.

Working in Arlington Heights

  • A lot of Arlington Heights kitchens date from the 1970s. We know these layouts well and what is worth keeping.
  • Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.
  • We know how Building & Life Safety Department handles kitchen permits and pull them for you.

ZIP 60004ZIP 60005

Kitchen Appliance Installation nearby

Planning a kitchen project in Arlington Heights?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback