Serving Naperville & nearby Lisle, Warrenville

Kitchen Appliance Installation in Naperville, IL

New range, dishwasher, built-in fridge or microwave? We install kitchen appliances in Naperville and take the old ones away.

  • Serving Naperville ZIP 60540, 60563, 60564, 60565
  • Installed level, sealed and tested before we leave
  • Clear price for the install before the visit

Prefer a callback?

Leave your number and a Naperville appliance installer will call you.

Appliance installation jobs we handle in Naperville

Our Naperville crews install dishwashers, gas and electric ranges, wall ovens, cooktops, built-in refrigerators and microwaves, whether you bought them from a big-box store, a local dealer or online. Each one goes in level, secured and checked before we leave.

Built-in refrigerator that needs an exact fit

Built-in and panel-ready fridges need precise openings, anti-tip anchoring and clear ventilation. We fit them flush with the cabinets.

Built-In Refrigerator Installation →

Leaks after a previous install

When an appliance installed by someone else starts leaking, we pull it, check each joint and put it back level and dry.

Dishwasher Installation →

Whole appliance package at once

Bought a full set of new appliances? We install the range, dishwasher, fridge and microwave in one coordinated visit where possible.

Built-in or drawer microwave

Built-in and drawer microwaves need exact cabinet openings and often a dedicated circuit. We prepare the cabinet and install them flush.

Microwave Installation →

Over-the-range microwave replacing a hood

An over-the-range microwave hangs on a wall plate and the cabinet above, and vents outside or recirculates. We mount it and connect the venting.

Microwave Installation →

Dishwasher waiting to be connected

We take a boxed dishwasher to a finished install: old unit out, new one connected, secured and checked for leaks.

Dishwasher Installation →

Old appliances that need to go

When appliances are replaced, the old ones have to go somewhere. We disconnect them safely and haul them away.

Kitchen Appliance Removal →

What the install includes

  • Readiness checkModel numbers matched against your gas, power, water, venting and the opening.
  • Cabinet and counter prepOpenings and cutouts adjusted to the maker's spec when needed.
  • Gas connectionsGas hookup with fresh fittings and a leak check.
  • Electrical connectionsPower matched to the appliance, with panel and circuit work by an electrician.
  • Water and drain connectionsWater and drain hooked up with new lines and fittings.
  • Anchoring and levelingAnti-tip brackets, mounting clips and leveling legs set per the instructions.
  • Haul-away and cleanupOld appliances and packaging removed and the area cleaned.

Options to choose from

Ranges, wall ovens and cooktopsFreestanding and slide-in ranges, wall ovens and drop-in cooktops.
MicrowavesOver-the-range, built-in with trim kit and drawer microwaves.
Panels and trim kitsCustom panels and trim kits that make appliances look built in.
Built-in refrigeratorsFridges designed to sit flush in a cabinet opening.
DishwashersStandard, compact and panel-ready dishwashers.

What the work looks like in Naperville homes

Kitchen Appliance Installation in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Appliance Installation in a 1980s-1990s two-story colonial / tract house — installedInstalled
Kitchen Appliance Installation in a 1980s-1990s two-story colonial / tract house — detailDetail

Before and after: a 1990s two-story colonial in Naperville

This one is a 1990s two-story colonial near Downtown Naperville. What we started with: almond appliances. What bothered the owners most: appliances older than the kids. Finished kitchen: a new range installed and level, anti-tip bracket in place. Work included readiness check, electrical connections, plus water and drain connections.

Kitchen Appliance Installation project in Lisle, beforeBefore
Kitchen Appliance Installation project in Lisle, afterAfter

Lisle kitchen, two-story colonial from the 1990s: kitchen appliance installation

This one is a two-story colonial from the 1990s in Lisle. Before: black appliances. The reason for the call: appliances that needed upgrading. After: a new range installed and level, anti-tip bracket in place. On site this meant gas connections, electrical connections, plus haul-away and cleanup.

Kitchen Appliance Installation in Lisle →
Kitchen Appliance Installation project in Bolingbrook, beforeBefore
Kitchen Appliance Installation project in Bolingbrook, afterAfter

A Bolingbrook 1990s two-story colonial: before and after

This one is a 1990s two-story colonial in Bolingbrook. The kitchen as it was: white appliances. The reason for the call: old appliances that no longer worked well. Finished kitchen: a new range installed and level, anti-tip bracket in place. On site this meant cabinet and counter prep, electrical connections, plus water and drain connections.

Kitchen Appliance Installation in Bolingbrook →
Kitchen Remodeling project near Naperville, beforeBefore
Kitchen Remodeling project near Naperville, afterAfter

Before and after: a 1980s two-story in Naperville

What changed: cabinets in light butter yellow with satin brass pulls, charcoal concrete-look quartz counters, a terracotta-look square tile backsplash, gray wood-look porcelain plank flooring and two glass pendants and recessed lights.

Kitchen Remodeling in Naperville →
Kitchen Cabinet Painting project near Naperville, beforeBefore
Kitchen Cabinet Painting project near Naperville, afterAfter

Naperville kitchen, 1980s two-story: kitchen cabinet painting

The same doors sprayed in pale mint green, new matte black pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Naperville →

How the install goes

  1. Send the model numbersTell us what you're installing and send photos of the current setup.
  2. Readiness checkWe confirm gas, power, water, venting and fit, and list anything that must change.
  3. Written estimateA clear written quote listing each appliance and any prep work.
  4. Install, test and haul awayOld units out, new ones connected, secured, tested and the old ones taken away.

Kitchen Appliance Installation questions from Naperville homeowners

Do you also install range hoods?
We do. Tell us about the hood when you send the other model numbers.
Do I need a permit for a gas range swap in Naperville?
Usually not for a like-for-like swap; yes for new gas piping. We check before starting.
Who should connect a gas appliance?
Gas work should be done by someone qualified to do it locally. We test every connection for leaks.
How long does appliance installation take?
A single swap often takes a few hours. A full package, or installs with cabinet, gas or electrical changes, take longer.
Will my kitchen need new electrical work?
Sometimes. Wall ovens, induction ranges and built-in microwaves often need dedicated circuits. An electrician checks the panel and adds them.
What happens to the old appliance in Naperville?
Hauler Groot Industries (630-892-9294): two bulk items/week free; one appliance/week free but call ahead. If you'd rather not deal with it, we haul old units and debris away.
Does Naperville require a licensed electrician for appliance installation?
City guide says electricians must be licensed; it advises insisting on seeing a current license. New circuits and wiring are done by licensed electricians.
What is the Naperville building department phone number?
Permits go through Transportation, Engineering and Development (TED) Business Group, Building Permits, phone (630) 420-6100, Option 2. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for appliance installation in Naperville?
It depends on the scope. Naperville's rule in short: Remodeling such as kitchens requires a permit, as do electrical work (minor repairs and low-voltage excepted), plumbing pipe/fixture installation or rearrangement, and structural changes. We handle the permit when one is needed with Transportation, Engineering and Development (TED) Business Group, Building Permits.
Do you work in my part of Naperville?
Yes. Our crews work across Naperville, including Downtown Naperville, Highlands, Tamarack — ZIP 60540, 60563, 60564, 60565 — and nearby Lisle, Warrenville, Bolingbrook.

Working in Naperville

  • A lot of Naperville kitchens date from the 1990s. We know these layouts well and what is worth keeping.
  • Most Naperville homes are single-family. We protect floors and driveways and leave the site clean every day.
  • Live in the Naperville Historic District? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.

Downtown NapervilleHighlandsTamarack

ZIP 60540ZIP 60563ZIP 60564ZIP 60565

Kitchen Appliance Installation nearby

Planning a kitchen project in Naperville?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback