Serving Lombard & nearby Villa Park, Glen Ellyn

Kitchen Appliance Installation in Lombard, IL

New range, dishwasher, built-in fridge or microwave? We install kitchen appliances in Lombard and take the old ones away.

  • Serving Lombard ZIP 60148
  • Installed level, sealed and tested before we leave
  • Clear price for the install before the visit

Prefer a callback?

Leave your number and a Lombard appliance installer will call you.

Appliance installation jobs we handle in Lombard

Our Lombard crews install dishwashers, gas and electric ranges, wall ovens, cooktops, built-in refrigerators and microwaves, whether you bought them from a big-box store, a local dealer or online. Each one goes in level, secured and checked before we leave.

Condo deliveries and building rules

In a condo building we reserve the freight elevator, protect the halls and work within quiet hours.

Leaks after a previous install

When an appliance installed by someone else starts leaking, we pull it, check each joint and put it back level and dry.

Dishwasher Installation →

Ice maker with no water line

If your new fridge has an ice maker and there's no supply behind it, a line has to be run. We connect it with an accessible shutoff.

Built-In Refrigerator Installation →

Circuits and gas that may not be ready

Gas lines, 240-volt circuits, water valves and vent paths are checked up front, so you know what's ready and what isn't.

Built-in or drawer microwave

A microwave drawer in an island or a trim-kit model in a wall cabinet both depend on an exact cutout. We fit and secure them.

Microwave Installation →

Built-in refrigerator that needs an exact fit

Built-in and panel-ready fridges need precise openings, anti-tip anchoring and clear ventilation. We fit them flush with the cabinets.

Built-In Refrigerator Installation →

Dishwasher waiting to be connected

If the store delivered the dishwasher without hooking it up, we connect water, drain and power and run a test cycle.

Dishwasher Installation →

What we hook up and check

  • Readiness checkWe compare the installation guide with what your kitchen has.
  • Old appliance disconnectedWe isolate supplies and unhook the old appliance safely.
  • Cabinet and counter prepOpenings and cutouts adjusted to the maker's spec when needed.
  • Electrical connectionsPower matched to the appliance, with panel and circuit work by an electrician.
  • Water and drain connectionsWater and drain hooked up with new lines and fittings.
  • TestingBurners lit, elements heated, cycles run and joints checked for leaks.
  • Haul-away and cleanupWe take the old units and cartons with us.

Models, parts and fittings

DishwashersStandard, compact and panel-ready dishwashers.
Built-in refrigeratorsBuilt-in, column and panel-ready refrigerators, plus undercounter units.
Panels and trim kitsFronts and trim matched to the cabinets around the appliance.
MicrowavesMicrowaves mounted over the range or set into cabinets.
Ranges, wall ovens and cooktopsFreestanding and slide-in ranges, wall ovens and drop-in cooktops.

What the work looks like in Lombard homes

Kitchen Appliance Installation in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Appliance Installation in a 1980s-1990s two-story colonial / tract house — installedInstalled
Kitchen Appliance Installation in a 1980s-1990s two-story colonial / tract house — detailDetail

Before and after: a two-story colonial from the 1990s in Lombard

A two-story colonial from the 1990s in Lombard, a typical kitchen for Lombard. Before: white appliances. The reason for the call: tired white appliances that needed replacing. Finished kitchen: a new range installed and level, anti-tip bracket in place. The job covered old appliance disconnected, electrical connections, plus testing.

Kitchen Appliance Installation project in Villa Park, beforeBefore
Kitchen Appliance Installation project in Villa Park, afterAfter

Before and after: a 1980s two-story in Villa Park

A 1980s two-story in Villa Park, a typical kitchen for Villa Park. Before: almond appliances. The reason for the call: decades-old appliances that kept breaking down. Finished kitchen: a new range installed and level, anti-tip bracket in place. On site this meant old appliance disconnected, electrical connections, plus haul-away and cleanup.

Kitchen Appliance Installation in Villa Park →
Kitchen Appliance Installation project in Glen Ellyn, beforeBefore
Kitchen Appliance Installation project in Glen Ellyn, afterAfter

Before and after: a 1980s two-story in Glen Ellyn

A 1980s two-story in Glen Ellyn, a typical kitchen for Glen Ellyn. Before: black appliances. What bothered the owners most: new appliances waiting to be connected. The result: a new range installed and level, anti-tip bracket in place. Work included readiness check, cabinet and counter prep, plus haul-away and cleanup.

Kitchen Appliance Installation in Glen Ellyn →
Kitchen Remodeling project near Lombard, beforeBefore
Kitchen Remodeling project near Lombard, afterAfter

Before and after: a 1950s ranch in Lombard

Cabinets in dark teal with brushed nickel bar pulls, charcoal concrete-look quartz counters, a white 2x8 tile in a vertical stack backsplash, hickory luxury vinyl plank flooring and recessed lights and under-cabinet LED strips.

Kitchen Remodeling in Lombard →
Kitchen Cabinet Painting project near Lombard, beforeBefore
Kitchen Cabinet Painting project near Lombard, afterAfter

Kitchen Cabinet Painting in a 1950s ranch, Lombard

The same doors sprayed in powder blue, new satin brass pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Lombard →

Install day

  1. Send the model numbersTell us what you're installing and send photos of the current setup.
  2. Readiness checkWe confirm gas, power, water, venting and fit, and list anything that must change.
  3. Written estimateA clear written quote listing each appliance and any prep work.
  4. Install, test and haul awayOld units out, new ones connected, secured, tested and the old ones taken away.

Kitchen Appliance Installation questions from Lombard homeowners

Can you install appliances in a condo?
We do condo installs, coordinated with management.
Who should connect a gas appliance?
A qualified, licensed installer, following local code and the maker's instructions, with a leak test afterward.
Do you install appliances I bought from another store?
We do. Install-only jobs are a big part of our work.
Do you haul away old appliances?
Yes. We disconnect, remove and haul away old units; refrigerators go for proper refrigerant recovery.
How much does appliance installation cost?
A simple swap and an install with new circuits or gas lines are priced very differently. You get a line-item quote.
What happens to the old appliance in Lombard?
Hauler Waste Management. Large items under 100 lbs collected with one refuse sticker per 50 lbs. If you'd rather not deal with it, we haul old units and debris away.
Do I need a Lombard-registered contractor for appliance installation?
Contractors must register with the Village: $100 fee, valid 1 year, online or via Building Division; insurance certificate with at least $300,000 liability coverage. We take care of that before work starts.
Lombard building permit for appliance installation: where do I apply?
Permits go through Building Division, Community Development and Building, phone (630) 620-5750. When your scope needs one, we prepare the application and schedule the inspections.
Can you do appliance installation in a Lombard condo?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
What does Lombard ask for on electrical work?
Registration requires a copy of a current electrician license from a testing municipality plus a certificate of insurance. New circuits and wiring are done by licensed electricians.
Do I need a permit for appliance installation in Lombard?
It depends on the scope. Lombard's rule in short: Village requires a building permit for new structures and updates to existing structures; replacing interior doors and fixtures at the same size with no structural change needs no permit. We handle the permit when one is needed with Building Division, Community Development and Building.
Do you work in my part of Lombard?
Yes. Our crews work across Lombard — ZIP 60148 — and nearby Villa Park, Glen Ellyn, Addison.

Working in Lombard

  • A lot of Lombard kitchens date from the 1960s. We know these layouts well and what is worth keeping.
  • Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.
  • We know how Building Division, Community Development and Building handles kitchen permits and pull them for you.

ZIP 60148

Kitchen Appliance Installation nearby

Planning a kitchen project in Lombard?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback