Old appliances that need to go
When appliances are replaced, the old ones have to go somewhere. We disconnect them safely and haul them away.
Kitchen Appliance Removal →Serving Elmhurst & nearby Villa Park, Lombard
Kitchen Appliance Installation in Elmhurst, IL
New range, dishwasher, built-in fridge or microwave? We install kitchen appliances in Elmhurst and take the old ones away.
- Serving Elmhurst ZIP 60126
- Installed level, sealed and tested before we leave
- Clear price for the install before the visit
Appliance installation jobs we handle in Elmhurst
Our Elmhurst crews install dishwashers, gas and electric ranges, wall ovens, cooktops, built-in refrigerators and microwaves, whether you bought them from a big-box store, a local dealer or online. Each one goes in level, secured and checked before we leave.
Switching to induction
Before buying an induction range, it pays to know your electrical service. We look at the panel and the circuit at the range.
Oven, Range & Cooktop Installation →Built-in or drawer microwave
Built-in and drawer microwaves need exact cabinet openings and often a dedicated circuit. We prepare the cabinet and install them flush.
Microwave Installation →Leaks after a previous install
A slow drip from a supply line or drain joint can ruin a floor. We trace the leak and reconnect the appliance properly.
Dishwasher Installation →Over-the-range microwave replacing a hood
Swapping a range hood for a microwave means a mounting plate, a template-drilled cabinet bottom and a vent connection. We do all three.
Microwave Installation →Ice maker with no water line
If your new fridge has an ice maker and there's no supply behind it, a line has to be run. We connect it with an accessible shutoff.
Built-In Refrigerator Installation →New gas range needs a hookup
We connect gas ranges with a new flexible connector, check every joint for leaks and light each burner before leaving.
Oven, Range & Cooktop Installation →Circuits and gas that may not be ready
New appliances can need more power or a different hookup than the old ones. We check readiness before install day so nothing gets delayed.
What the install includes
- Old appliance disconnectedGas, power or water shut off and the old unit disconnected.
- Cabinet and counter prepCabinet and counter changes so the new unit fits and is supported.
- Gas connectionsNew connector, made by a qualified installer per local code and leak-tested.
- Electrical connectionsCord or hardwire connection; dedicated circuits are added by an electrician.
- Water and drain connectionsWater and drain hooked up with new lines and fittings.
- Anchoring and levelingAnti-tip brackets, mounting clips and leveling legs set per the instructions.
- TestingWe run every appliance before we go.
Models, parts and fittings
DishwashersBuilt-in dishwashers of any size and control style.
MicrowavesOver-the-range, built-in with trim kit and drawer microwaves.
Ranges, wall ovens and cooktopsGas, electric, dual-fuel and induction cooking appliances.
Built-in refrigeratorsFridges designed to sit flush in a cabinet opening.
Panels and trim kitsCustom panels and trim kits that make appliances look built in.
Kitchen Appliance Installation before and after — Elmhurst homes
Before
Installed
DetailElmhurst kitchen, 1990s two-story colonial: kitchen appliance installation
The site: a 1990s two-story colonial in Elmhurst. Before: black appliances. What bothered the owners most: appliances that needed upgrading. Finished kitchen: a new range installed and level, anti-tip bracket in place. The job covered old appliance disconnected, water and drain connections, plus anchoring and leveling.
Before
AfterVilla Park kitchen, 1990s two-story colonial: kitchen appliance installation
The site: a 1990s two-story colonial in Villa Park. The kitchen as it was: almond appliances. What bothered the owners most: appliances older than the kids. After: a new range installed and level, anti-tip bracket in place. On site this meant old appliance disconnected, gas connections, plus testing.
Kitchen Appliance Installation in Villa Park →
Before
AfterBefore and after: a 1990s two-story colonial in Lombard
This one is a 1990s two-story colonial in Lombard. What we started with: white appliances. The reason for the call: old appliances that no longer worked well. The result: a new range installed and level, anti-tip bracket in place. The job covered cabinet and counter prep, anchoring and leveling, plus testing.
Kitchen Appliance Installation in Lombard →
Before
AfterKitchen Remodeling in a postwar bi-level, Elmhurst
Finished: cabinets in light butter yellow with satin brass pulls, creamy quartzite-look quartz counters, a green zellige-look tile backsplash, warm oak luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.
Kitchen Remodeling in Elmhurst →
Before
AfterBefore and after: a postwar Cape Cod in Elmhurst
The same doors sprayed in creamy white uppers and navy lowers, new brushed nickel bar pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Elmhurst →From the old unit to the new one
- Send the model numbersTell us what you're installing and send photos of the current setup.
- Readiness checkWe confirm gas, power, water, venting and fit, and list anything that must change.
- Written estimateAn itemized estimate for removal, installation, parts and any electrical, plumbing or cabinet work.
- Install, test and haul awayWe install, test, clean up and remove the old appliances.
Kitchen Appliance Installation questions from Elmhurst homeowners
Who should connect a gas appliance?
Gas work should be done by someone qualified to do it locally. We test every connection for leaks.
How much does appliance installation cost?
A simple swap and an install with new circuits or gas lines are priced very differently. You get a line-item quote.
Can you install a full appliance package?
Yes. We plan the order so the kitchen is back in use quickly.
Is the install done to the manufacturer's instructions?
Yes. Every appliance is installed per the maker's instructions, including anchoring, clearances and connections.
Do I need a permit for a gas range swap in Elmhurst?
Connecting a new range to an existing gas shutoff often doesn't need one, but a new or extended gas line does. We confirm the Elmhurst rules first.
Elmhurst building permit for appliance installation: where do I apply?
Permits go through Community Development Department (Building), phone 630-530-3030. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for appliance installation in Elmhurst?
It depends on the scope. Elmhurst's rule in short: Elmhurst requires permits for building and construction projects; all permits are applied for through the City's Citizen Self-Service Portal. We handle the permit when one is needed with Community Development Department (Building).
Do you work in my part of Elmhurst?
Yes. Our crews work across Elmhurst — ZIP 60126 — and nearby Villa Park, Lombard, Addison.
Working in Elmhurst
- A lot of Elmhurst kitchens date from the 1950s. We know these layouts well and what is worth keeping.
- Most Elmhurst homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Community Development Department (Building) handles kitchen permits and pull them for you.
ZIP 60126
Kitchen Appliance Installation nearby
Other kitchen services in Elmhurst
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Kitchen Backsplash InstallationTile backsplashes with clean lines and flush outlets.