Whole appliance package at once
We install a full kitchen appliance package, checking each hookup before any unit goes in.
Serving Bloomingdale & nearby Roselle, Glendale Heights
Kitchen Appliance Installation in Bloomingdale, IL
New range, dishwasher, built-in fridge or microwave? We install kitchen appliances in Bloomingdale and take the old ones away.
- Installers working in Bloomingdale ZIP 60108
- Hookups by licensed trades where the code calls for it
- Old unit hauled away on request
Appliance installation jobs we handle in Bloomingdale
Our Bloomingdale crews install dishwashers, gas and electric ranges, wall ovens, cooktops, built-in refrigerators and microwaves, whether you bought them from a big-box store, a local dealer or online. Each one goes in level, secured and checked before we leave.
Wall oven or cooktop that doesn't fit the cutout
Cutout sizes change between models, so a replacement oven or cooktop may need the cabinet or counter reworked. We handle it.
Oven, Range & Cooktop Installation →Old appliances that need to go
When appliances are replaced, the old ones have to go somewhere. We disconnect them safely and haul them away.
Kitchen Appliance Removal →Ice maker with no water line
A refrigerator water line is connected to an existing valve, or a plumber runs a new one when needed.
Built-In Refrigerator Installation →New gas range needs a hookup
We connect gas ranges with a new flexible connector, check every joint for leaks and light each burner before leaving.
Oven, Range & Cooktop Installation →Dishwasher waiting to be connected
If the store delivered the dishwasher without hooking it up, we connect water, drain and power and run a test cycle.
Dishwasher Installation →Built-in refrigerator that needs an exact fit
A built-in fridge is installed to the maker's cutout, anchored into framing and finished with panels that match the cabinet fronts.
Built-In Refrigerator Installation →Over-the-range microwave replacing a hood
Swapping a range hood for a microwave means a mounting plate, a template-drilled cabinet bottom and a vent connection. We do all three.
Microwave Installation →What the install includes
- Readiness checkWe compare the installation guide with what your kitchen has.
- Old appliance disconnectedGas, power or water shut off and the old unit disconnected.
- Gas connectionsGas hookup with fresh fittings and a leak check.
- Electrical connectionsPower matched to the appliance, with panel and circuit work by an electrician.
- Water and drain connectionsSupply lines, drains, high loops or air gaps per code.
- Anchoring and levelingAnti-tip brackets, mounting clips and leveling legs set per the instructions.
- Haul-away and cleanupOld appliances and packaging removed and the area cleaned.
Options to choose from
Panels and trim kitsCustom panels and trim kits that make appliances look built in.
DishwashersStandard, compact and panel-ready dishwashers.
Built-in refrigeratorsBuilt-in, column and panel-ready refrigerators, plus undercounter units.
Ranges, wall ovens and cooktopsFreestanding and slide-in ranges, wall ovens and drop-in cooktops.
Install partsNew gas connectors, braided supply lines, cord kits and anti-tip brackets.
Before and after: kitchens near Bloomingdale
Before
Installed
DetailBefore and after: a 1990s two-story colonial in Bloomingdale
The site: a 1990s two-story colonial near Old Town Bloomingdale. Before: black appliances. What bothered the owners most: new appliances waiting to be connected. Finished kitchen: a new range installed and level, anti-tip bracket in place. On site this meant gas connections, electrical connections, plus water and drain connections.
Before
AfterKitchen Appliance Installation in a 1990s two-story colonial, Roselle
The site: a 1990s two-story colonial in Roselle. The kitchen as it was: almond appliances. What bothered the owners most: appliances older than the kids. After: a new range installed and level, anti-tip bracket in place. Work included water and drain connections, anchoring and leveling, plus haul-away and cleanup.
Kitchen Appliance Installation in Roselle →
Before
AfterCarol Stream kitchen, two-story colonial from the 1990s: kitchen appliance installation
This one is a two-story colonial from the 1990s in Carol Stream. The kitchen as it was: white appliances. The reason for the call: old appliances that no longer worked well. After: a new range installed and level, anti-tip bracket in place. The job covered old appliance disconnected, water and drain connections, plus haul-away and cleanup.
Kitchen Appliance Installation in Carol Stream →
Before
AfterBefore and after: a two-story colonial from the 1990s in Bloomingdale
What changed: cabinets in pale sage with unlacquered brass knobs and cup pulls, charcoal concrete-look quartz counters, a terracotta-look square tile backsplash, light oak hardwood flooring and black cage pendants and slim recessed lights.
Kitchen Remodeling in Bloomingdale →
Before
AfterBefore and after: a 1990s two-story colonial in Bloomingdale
Finished: the same doors sprayed in creamy white uppers and navy lowers, new satin brass pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Bloomingdale →From the old unit to the new one
- Send the model numbersShare the model and the space where it goes.
- Readiness checkWe confirm gas, power, water, venting and fit, and list anything that must change.
- Written estimateAn itemized estimate for removal, installation, parts and any electrical, plumbing or cabinet work.
- Install, test and haul awayOld units out, new ones connected, secured, tested and the old ones taken away.
Kitchen Appliance Installation questions from Bloomingdale homeowners
How much does appliance installation cost?
It depends on the appliance, the connections and any prep work. We give a written, itemized estimate after reviewing your setup.
Do you also install range hoods?
Yes, hood installation is a related service; ask us when you book.
Do you haul away old appliances?
We do. The old appliances leave with us.
Who should connect a gas appliance?
A licensed professional. It's a safety job, not a DIY shortcut.
Can you install a full appliance package?
Yes. We plan the order so the kitchen is back in use quickly.
Bloomingdale contractor registration: do kitchen contractors need it?
No registration application or fee to work as a contractor in Bloomingdale. Permit submittals need a detailed written scope of work. We take care of that before work starts.
What happens to the old appliance in Bloomingdale?
Hauler SBC Waste Solutions: bulk items (up to 2 cubic yards, e.g. furniture) and white goods (appliances) covered under flat rate. If you'd rather not deal with it, we haul old units and debris away.
Does Bloomingdale require a licensed electrician for appliance installation?
A license is required depending on permit type; electrical is listed among the trade licenses. New circuits and wiring are done by licensed electricians.
Does appliance installation need a Bloomingdale building permit, and who files it?
Permits go through Building & Zoning Department, phone (630) 671-5660. When your scope needs one, we prepare the application and schedule the inspections.
Do you work in my part of Bloomingdale?
Yes. Our crews work across Bloomingdale, including Old Town Bloomingdale — ZIP 60108 — and nearby Roselle, Glendale Heights, Carol Stream.
Working in Bloomingdale
- A lot of Bloomingdale kitchens date from the 1970s. We know these layouts well and what is worth keeping.
- Most Bloomingdale homes are single-family. We protect floors and driveways and leave the site clean every day.
Old Town Bloomingdale
ZIP 60108
Kitchen Appliance Installation nearby
Other kitchen services in Bloomingdale
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Kitchen Backsplash InstallationTile backsplashes with clean lines and flush outlets.