Serving Crystal Lake & nearby Lake Zurich, Elgin

Oven, Range & Cooktop Installation in Crystal Lake, IL

We install gas and electric ranges, wall ovens and cooktops in Crystal Lake, connected safely, leveled and checked before we go.

  • Serving Crystal Lake ZIP 60014, 60012, 60098
  • Installed level, sealed and tested before we leave
  • Clear price for the install before the visit

Prefer a callback?

Leave your number and a Crystal Lake range and oven installer will call you.

Range, oven and cooktop installs we handle in Crystal Lake

Swapping a stove sounds quick, and often it is. When it isn't, the reason is usually an old flex connector, a circuit too small for a new wall oven, or a cooktop cutout that doesn't match. We take care of those details in Crystal Lake kitchens so the appliance works safely from day one.

1990s wall oven and cooktop combo

A 1990s built-in oven and drop-in cooktop can usually be replaced in place, though cutouts and wiring often need updating.

Wall oven doesn't fit the old cabinet

If the new wall oven is too tall or too deep for the old box, we rework the cabinet opening and add a support shelf rated for the weight.

Switching from gas to induction

Many owners want to leave gas behind. The first question is whether your electrical service can carry an induction range; we find out before you buy.

Double wall oven on an undersized circuit

Older wiring to a wall oven is often too light for a modern double unit. We confirm the circuit and have it upgraded when needed.

Cooktop cutout in the wrong size

If the new cooktop is bigger than the old one, the counter has to be cut; if it's smaller, a filler kit or new counter section may be required.

Pro-style range that needs more gas and space

A 36- or 48-inch range is heavier and hungrier than a standard one. We look at the floor, the gas supply and the hood before install day.

Slide-in range that won't sit flush

Slide-in ranges have to fit the counter edge and the cabinet sides closely. We check the opening, trim the anti-tip setup and level the unit until the side trim sits tight.

Range that tips forward when the oven door opens

If you can rock the range by leaning on the door, it isn't anchored. We add the maker's bracket and slide the unit back until it locks in.

What the install includes

  • Supply and opening checkA check of gas valve or breaker, outlet type, cutout size and clearances.
  • Disconnecting the old applianceWe isolate the supply and take out the old unit without damaging the floor or counter.
  • Cabinet and counter adjustmentsOpenings trimmed or reinforced so the new appliance fits and is supported.
  • Gas connectionGas hookup with a new connector, each joint checked with a leak detector solution.
  • Electrical connectionCord or hardwire connection to a circuit sized for the appliance; new circuits are run by an electrician.
  • Wall oven and cooktop mountingBuilt-in units secured with the maker's brackets and screws.
  • Haul-away and cleanupWe remove the old unit, cartons and debris.

Models, parts and fittings

Freestanding rangesFinished sides, controls on the backguard, the easiest to install and replace.
Slide-in and front-control rangesRanges that sit flush with the cabinets and need a closer fit.
Pro-style rangesLarger 36- and 48-inch ranges that often call for a stronger hood.
Gas and electric cooktopsCooktops set into the counter, often paired with a wall oven.
Single and double wall ovensOvens built into a cabinet at a comfortable height, alone or stacked with a second oven or a microwave.

What the work looks like in Crystal Lake homes

Oven, Range & Cooktop Installation in a 1980s-1990s two-story colonial / tract house — beforeBefore
Oven, Range & Cooktop Installation in a 1980s-1990s two-story colonial / tract house — installedInstalled
Oven, Range & Cooktop Installation in a 1980s-1990s two-story colonial / tract house — detailDetail

Crystal Lake kitchen, two-story colonial from the 1990s: oven, range & cooktop installation

This one is a two-story colonial from the 1990s near Downtown. What we started with: almond appliances. What bothered the owners most: an old range they no longer trusted. Finished kitchen: a new stainless range installed level with a new gas connector. The job covered cabinet and counter adjustments, electrical connection, plus haul-away and cleanup.

Oven, Range & Cooktop Installation project in Lake Zurich, beforeBefore
Oven, Range & Cooktop Installation project in Lake Zurich, afterAfter

Oven, Range & Cooktop Installation in a 1990s two-story colonial, Lake Zurich

The site: a 1990s two-story colonial in Lake Zurich. Before: white appliances. The reason for the call: a new range waiting to be connected. Finished kitchen: a new stainless range installed level with a new gas connector. The job covered supply and opening check, wall oven and cooktop mounting, plus haul-away and cleanup.

Oven, Range & Cooktop Installation in Lake Zurich →
Oven, Range & Cooktop Installation project in Palatine, beforeBefore
Oven, Range & Cooktop Installation project in Palatine, afterAfter

A Palatine 1980s two-story: before and after

A 1980s two-story in Palatine, a typical kitchen for Palatine. The kitchen as it was: black appliances. The reason for the call: a new range waiting to be connected. After: a new stainless range installed level with a new gas connector. On site this meant gas connection, wall oven and cooktop mounting, plus haul-away and cleanup.

Oven, Range & Cooktop Installation in Palatine →
Kitchen Remodeling project near Crystal Lake, beforeBefore
Kitchen Remodeling project near Crystal Lake, afterAfter

Kitchen Remodeling in a 1980s two-story, Crystal Lake

What changed: cabinets in warm taupe with satin brass pulls, warm walnut butcher block counters, a gray beveled subway tile backsplash, light beige 18x18 porcelain tile flooring and recessed lights and under-cabinet LED strips.

Kitchen Remodeling in Crystal Lake →
Kitchen Cabinet Painting project near Crystal Lake, beforeBefore
Kitchen Cabinet Painting project near Crystal Lake, afterAfter

Crystal Lake kitchen, 1990s two-story colonial: kitchen cabinet painting

Finished: the same doors sprayed in creamy white uppers and navy lowers, new matte black pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Crystal Lake →

Install day

  1. Model and photosSend the model number and photos of the space, the shutoff or outlet behind the old unit.
  2. Readiness checkWe confirm the gas supply or circuit, the cutout and the clearances, and flag any permit work.
  3. Written estimateAn itemized estimate for removal, installation, parts and any gas line or electrical work.
  4. Install and testOld unit out, new one connected, anchored, leveled and tested burner by burner.

Oven, Range & Cooktop Installation questions from Crystal Lake homeowners

Will you haul away my old stove?
Yes. We disconnect it, cap or prepare the supply and take the old range or oven with us.
Do I need a permit to install a gas range in Crystal Lake?
Swapping a range onto an existing gas outlet often doesn't need one, but running a new gas line does. We confirm the Crystal Lake rules before starting.
Do you install ranges and ovens I bought elsewhere?
We do. Send the model number and we bring the right connector and parts.
Can a gas range be converted to propane?
Many ranges include or offer a conversion kit, and the conversion should be done by a qualified installer per the maker's instructions.
Can you install a wall oven in my existing cabinet?
Yes in many cases. Older ovens left openings in odd sizes, so some cabinet work is common.
Can Crystal Lake bulk pickup take my old appliance or cabinets?
Hauler: Lakeshore Recycling Systems (LRS), (844) 633-3577. One bulk item per week included. If you'd rather not deal with it, we haul old units and debris away.
Crystal Lake building permit for range or oven installation: where do I apply?
Permits go through City of Crystal Lake Community Development - Building Division (ezAPP online permits), phone (815) 356-3605. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for range or oven installation in Crystal Lake?
It depends on the scope. Crystal Lake's rule in short: Kitchen alteration handout (Nov 2019) requires a contractor list and two sets of plans showing floor plans, electrical layout, structure and plumbing changes; inspections for rough electrical, plumbing, framing, insulation and final. We handle the permit when one is needed with City of Crystal Lake Community Development - Building Division.
Do you work in my part of Crystal Lake?
Yes. Our crews work across Crystal Lake, including Downtown, Coventry, Four Colonies, The Villages — ZIP 60014, 60012, 60098 — and nearby Lake Zurich, Elgin, Hoffman Estates.

Working in Crystal Lake

  • A lot of Crystal Lake kitchens date from the 1990s. We know these layouts well and what is worth keeping.
  • Most Crystal Lake homes are single-family. We protect floors and driveways and leave the site clean every day.
  • Live in a historic district? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.

DowntownCoventryFour ColoniesThe VillagesWedgewoodBurtons Bridge

ZIP 60014ZIP 60012ZIP 60098

Oven, Range & Cooktop Installation nearby

Planning a kitchen project in Crystal Lake?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback