1970s wall oven and cooktop combo
Original 1970s wall ovens leave odd-sized openings. We match a new oven to the box or adjust the cabinet to fit.
Serving Oak Brook & nearby Villa Park, Lombard
Oven, Range & Cooktop Installation in Oak Brook, IL
We install gas and electric ranges, wall ovens and cooktops in Oak Brook, connected safely, leveled and checked before we go.
- Serving Oak Brook ZIP 60523
- Installed level, sealed and tested before we leave
- Clear price for the install before the visit
Range, oven and cooktop installs we handle in Oak Brook
Swapping a stove sounds quick, and often it is. When it isn't, the reason is usually an old flex connector, a circuit too small for a new wall oven, or a cooktop cutout that doesn't match. We take care of those details in Oak Brook kitchens so the appliance works safely from day one.
New range delivered but not hooked up
Many delivery crews drop off a gas range without connecting it. We hook it up with a new connector, leak-test the joints and light every burner.
Old gas connector that shouldn't be reused
Flexible gas connectors aren't meant to be moved and reused for decades. We install a new one sized for the appliance with every range swap.
Electric range with a mismatched cord or outlet
A new electric range ships without a cord. We connect the one that suits your outlet and check the ground connection.
Wall oven doesn't fit the old cabinet
If the new wall oven is too tall or too deep for the old box, we rework the cabinet opening and add a support shelf rated for the weight.
Double wall oven on an undersized circuit
Older wiring to a wall oven is often too light for a modern double unit. We confirm the circuit and have it upgraded when needed.
Range that tips forward when the oven door opens
Missing anti-tip brackets are common on older installs. We fasten one to the floor or wall and check it holds before we leave.
Pro-style range that needs more gas and space
Professional-style ranges come with their own install requirements, from gas pressure to backguard clearance. We follow the maker's instructions.
What we hook up and check
- Supply and opening checkWe look at the gas shutoff or circuit, measure the opening and compare it to the new unit's specs.
- Disconnecting the old applianceWe isolate the supply and take out the old unit without damaging the floor or counter.
- Gas connectionGas hookup with a new connector, each joint checked with a leak detector solution.
- Electrical connectionThe appliance tied into the correct 240-volt or 120-volt supply, with panel and circuit work handled by an electrician.
- Anti-tip bracket and levelingBracket installed, feet adjusted until the oven racks sit level.
- Wall oven and cooktop mountingWall ovens fastened into the cabinet; cooktops set and clamped into the counter.
- Burner, element and oven testEvery burner lit and checked for flame, every element and oven mode heated.
What to pick before the install
Pro-style rangesWide, heavy ranges with high-output burners and specific gas and clearance needs.
Single and double wall ovensWall ovens need the right cutout, support and a dedicated circuit.
Gas, electric and dual-fuelPick the fuel by what you cook and what your kitchen has; dual-fuel combines both.
Freestanding rangesFinished sides, controls on the backguard, the easiest to install and replace.
Slide-in and front-control rangesRanges that sit flush with the cabinets and need a closer fit.
Oven, Range & Cooktop Installation before and after — Oak Brook homes
Before
Installed
DetailOak Brook kitchen, two-story colonial from the 1990s: oven, range & cooktop installation
This one is a two-story colonial from the 1990s in Oak Brook. Before: white appliances. What bothered the owners most: a new range waiting to be connected. Finished kitchen: a new stainless range installed level with a new gas connector. The job covered gas connection, anti-tip bracket and leveling, plus wall oven and cooktop mounting.
Before
AfterOven, Range & Cooktop Installation in a 1990s two-story colonial, Villa Park
A 1990s two-story colonial in Villa Park, a typical kitchen for Villa Park. What we started with: almond appliances. What bothered the owners most: a decades-old stove that was hard to keep lit. Finished kitchen: a new stainless range installed level with a new gas connector. On site this meant disconnecting the old appliance, electrical connection, plus burner, element and oven test.
Oven, Range & Cooktop Installation in Villa Park →
Before
AfterA Lombard 1980s two-story: before and after
A 1980s two-story in Lombard, a typical kitchen for Lombard. The kitchen as it was: black appliances. The main complaint was an old stove that needed replacing. After: a new stainless range installed level with a new gas connector. The job covered gas connection, electrical connection, plus wall oven and cooktop mounting.
Oven, Range & Cooktop Installation in Lombard →
Before
AfterAn Oak Brook raised ranch: before and after
Cabinets in white uppers and dusty blue lowers with satin brass pulls, white quartz with soft gray veining counters, a white 2x8 tile in a vertical stack backsplash, hickory luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.
Kitchen Remodeling in Oak Brook →
Before
AfterBefore and after: a 1970s split-level in Oak Brook
Finished: the same doors sprayed in sage green, new matte black pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Oak Brook →How the install goes
- Model and photosSend the model number and photos of the space, the shutoff or outlet behind the old unit.
- Readiness checkWe confirm the gas supply or circuit, the cutout and the clearances, and flag any permit work.
- Written estimateA clear written price with any permit, gas or circuit work listed separately.
- Install and testOld unit out, new one connected, anchored, leveled and tested burner by burner.
Oven, Range & Cooktop Installation questions from Oak Brook homeowners
Does a wall oven need its own circuit?
Yes. Electric wall ovens run on a dedicated circuit sized to the oven's rating, and double ovens often need a larger one.
Will you haul away my old stove?
Yes. We disconnect it, cap or prepare the supply and take the old range or oven with us.
Can I switch to induction in an older Oak Brook home?
Often yes, but it depends on your electrical service. An electrician checks the panel capacity and runs a 240-volt circuit sized for the cooktop or range.
Does a gas range need to be professionally installed?
It's the safer route. Gas work is regulated, and a proper install includes a leak test and the anti-tip bracket.
What is an anti-tip bracket and do I need one?
It's a small metal bracket behind the rear leg. Every freestanding and slide-in range should have one engaged.
What is the Oak Brook building department phone number?
Permits go through Development Services (Building), phone (630) 368-5101. When your scope needs one, we prepare the application and schedule the inspections.
What does Oak Brook ask for on electrical work?
Current license from a testing jurisdiction, or current ICC electrician certification for the scope; other municipalities' business licenses not accepted. New circuits and wiring are done by licensed electricians.
Do I need a Oak Brook-registered contractor for range or oven installation?
Oak Brook does not require contractor registration; no village-specific requirements for residential alterations. We take care of that before work starts.
Do I need a permit for range or oven installation in Oak Brook?
It depends on the scope. Oak Brook's rule in short: Village publishes a Residential Permit Requirement Listing; its Residential Alteration category requires contract/scope of work, architectural plans and plat of survey. We handle the permit when one is needed with Development Services (Building).
Do you work in my part of Oak Brook?
Yes. Our crews work across Oak Brook — ZIP 60523 — and nearby Villa Park, Lombard, Elmhurst.
Working in Oak Brook
- A lot of Oak Brook kitchens date from the 1970s. We know these layouts well and what is worth keeping.
- Most Oak Brook homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Development Services (Building) handles kitchen permits and pull them for you.
ZIP 60523
Oven, Range & Cooktop Installation nearby
Other kitchen services in Oak Brook
Dishwasher InstallationOld unit out, new dishwasher connected, leveled and leak-tested.
Built-In Refrigerator InstallationBuilt-in and panel-ready fridges fitted flush, anchored and connected.
Microwave InstallationOver-the-range, drawer and built-in microwaves mounted, powered and vented.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.