1970s wall oven and cooktop combo
Original 1970s wall ovens leave odd-sized openings. We match a new oven to the box or adjust the cabinet to fit.
Serving Glendale Heights & nearby Bloomingdale, Carol Stream
Oven, Range & Cooktop Installation in Glendale Heights, IL
We install gas and electric ranges, wall ovens and cooktops in Glendale Heights, connected safely, leveled and checked before we go.
- Installers working in Glendale Heights ZIP 60139
- Hookups by licensed trades where the code calls for it
- Old unit hauled away on request
Range, oven and cooktop installs we handle in Glendale Heights
Swapping a stove sounds quick, and often it is. When it isn't, the reason is usually an old flex connector, a circuit too small for a new wall oven, or a cooktop cutout that doesn't match. We take care of those details in Glendale Heights kitchens so the appliance works safely from day one.
Wall oven doesn't fit the old cabinet
Replacing a decades-old wall oven often means resizing the cabinet. We adjust the cutout so the trim covers it cleanly.
Range that tips forward when the oven door opens
Missing anti-tip brackets are common on older installs. We fasten one to the floor or wall and check it holds before we leave.
Switching from gas to induction
Moving to induction means power, not plumbing. We have the panel capacity checked, the circuit added and the old gas supply safely capped.
Pro-style range that needs more gas and space
Larger pro-style ranges can need a bigger gas supply, a specific regulator and wider clearances. We check the specs against the line and the space.
Cooktop cutout in the wrong size
A new cooktop rarely matches the old hole. We enlarge laminate or wood openings, and stone cutouts are recut by a fabricator when needed.
Downdraft or venting questions
If the old hood is too small or only recirculates, a new range may be the moment to upgrade the ventilation as well.
Switching from electric to gas
If there's no gas at the range today, a new branch line has to be run from the supply, pressure-tested and inspected before a gas range can go in.
What the install includes
- Supply and opening checkWe look at the gas shutoff or circuit, measure the opening and compare it to the new unit's specs.
- Disconnecting the old applianceGas or power off, the old range, oven or cooktop disconnected and removed.
- Cabinet and counter adjustmentsOpenings trimmed or reinforced so the new appliance fits and is supported.
- Gas connectionGas hookup with a new connector, each joint checked with a leak detector solution.
- Electrical connectionCord or hardwire connection to a circuit sized for the appliance; new circuits are run by an electrician.
- Wall oven and cooktop mountingWall ovens fastened into the cabinet; cooktops set and clamped into the counter.
- Haul-away and cleanupThe old appliance and packaging leave with us, and the area is wiped down.
What to pick before the install
Gas and electric cooktopsCooktops set into the counter, often paired with a wall oven.
Gas, electric and dual-fuelGas burners with a gas or electric oven; dual-fuel units need both a gas line and a 240-volt circuit.
Freestanding rangesFinished sides, controls on the backguard, the easiest to install and replace.
Pro-style rangesLarger 36- and 48-inch ranges that often call for a stronger hood.
Slide-in and front-control rangesControls on the front, no backguard, the cooktop overlapping the counter for a built-in look.
What the work looks like in Glendale Heights homes
Before
Installed
DetailBefore and after: a 1980s two-story in Glendale Heights
The site: a 1980s two-story in Glendale Heights. What we started with: white appliances. The main complaint was a new range waiting to be connected. After: a new stainless range installed level with a new gas connector. The job covered gas connection, electrical connection, plus haul-away and cleanup.
Before
AfterCarol Stream kitchen, two-story colonial from the 1990s: oven, range & cooktop installation
A two-story colonial from the 1990s in Carol Stream, a typical kitchen for Carol Stream. The kitchen as it was: black appliances. The reason for the call: a new range waiting to be connected. After: a new stainless range installed level with a new gas connector. Work included supply and opening check, cabinet and counter adjustments, plus electrical connection.
Oven, Range & Cooktop Installation in Carol Stream →
Before
AfterBefore and after: a 1980s two-story in Addison
This one is a 1980s two-story in Addison. Before: almond appliances. The reason for the call: a decades-old stove that was hard to keep lit. The result: a new stainless range installed level with a new gas connector. On site this meant supply and opening check, gas connection, plus haul-away and cleanup.
Oven, Range & Cooktop Installation in Addison →
Before
AfterGlendale Heights kitchen, 1980s two-story: kitchen remodeling
Finished: cabinets in light butter yellow with satin brass pulls, warm walnut butcher block counters, a gray beveled subway tile backsplash, black-and-white checkerboard tile flooring and two glass pendants and recessed lights.
Kitchen Remodeling in Glendale Heights →
Before
AfterKitchen Cabinet Painting in a two-story colonial from the 1990s, Glendale Heights
The same doors sprayed in forest green, new satin brass pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Glendale Heights →From the old unit to the new one
- Model and photosTell us what you're installing, and show us the current hookup.
- Readiness checkWe compare your kitchen with the installation guide and list what needs to change.
- Written estimateAn itemized estimate for removal, installation, parts and any gas line or electrical work.
- Install and testOld unit out, new one connected, anchored, leveled and tested burner by burner.
Oven, Range & Cooktop Installation questions from Glendale Heights homeowners
Can you install a wall oven in my existing cabinet?
Often, if the cutout is close to the new oven's spec. Otherwise we enlarge or fill the opening and make sure the support shelf carries the weight.
Does a gas range need to be professionally installed?
It's the safer route. Gas work is regulated, and a proper install includes a leak test and the anti-tip bracket.
Do you install ranges and ovens I bought elsewhere?
We do. Send the model number and we bring the right connector and parts.
Can a gas range be converted to propane?
If the model supports it, a qualified installer converts it with the manufacturer's kit.
Can I switch to induction in an older Glendale Heights home?
Many older homes can take induction after a new circuit is added. If the panel is full or small, that has to be addressed first.
What happens to the old appliance in Glendale Heights?
Republic Services (847-981-0091): call to arrange curbside pickup of appliances and furniture; items over 50 lb need notice. If you'd rather not deal with it, we haul old units and debris away.
Can you do range or oven installation in a Glendale Heights condo?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
Does range or oven installation need a Glendale Heights building permit, and who files it?
Permits go through Community Development Department, phone 630-260-6030. When your scope needs one, we prepare the application and schedule the inspections.
Glendale Heights contractor registration: do kitchen contractors need it?
Contractors must be licensed with the Village before working; $20,000 surety/license bond required. We take care of that before work starts.
What does Glendale Heights ask for on electrical work?
Electricians exempt from purchasing a Village license but must submit current city/state registration, application and bond. New circuits and wiring are done by licensed electricians.
Do I need a permit for range or oven installation in Glendale Heights?
It depends on the scope. Glendale Heights's rule in short: Permits required for most construction projects; a Residential Remodel/Alteration application exists; call Community Development if unsure. We handle the permit when one is needed with Community Development Department.
Do you work in my part of Glendale Heights?
Yes. Our crews work across Glendale Heights — ZIP 60139 — and nearby Bloomingdale, Carol Stream, Addison.
Working in Glendale Heights
- A lot of Glendale Heights kitchens date from the 1970s. We know these layouts well and what is worth keeping.
- Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.
- We know how Community Development Department handles kitchen permits and pull them for you.
ZIP 60139
Oven, Range & Cooktop Installation nearby
Other kitchen services in Glendale Heights
Dishwasher InstallationOld unit out, new dishwasher connected, leveled and leak-tested.
Built-In Refrigerator InstallationBuilt-in and panel-ready fridges fitted flush, anchored and connected.
Microwave InstallationOver-the-range, drawer and built-in microwaves mounted, powered and vented.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.