1970s wall oven and cooktop combo
Kitchens from the 1970s often have a built-in wall oven and a separate cooktop. We replace them with modern units sized to the old cutouts or rework the cabinets.
Serving Itasca & nearby Wood Dale, Elk Grove Village
Oven, Range & Cooktop Installation in Itasca, IL
We install gas and electric ranges, wall ovens and cooktops in Itasca, connected safely, leveled and checked before we go.
- Installers working in Itasca ZIP 60143
- Hookups by licensed trades where the code calls for it
- Old unit hauled away on request
Range, oven and cooktop installs we handle in Itasca
Swapping a stove sounds quick, and often it is. When it isn't, the reason is usually an old flex connector, a circuit too small for a new wall oven, or a cooktop cutout that doesn't match. We take care of those details in Itasca kitchens so the appliance works safely from day one.
Slide-in range that won't sit flush
A slide-in is less forgiving than a freestanding range. We measure the cutout first and set the unit so its cooktop overlaps the counter evenly.
Double wall oven on an undersized circuit
A double oven can draw far more than a single unit. An electrician checks the panel and runs a circuit sized to the nameplate before we install it.
Switching from electric to gas
Going from an electric range to gas means running a new gas line to the kitchen, which needs a permit and a licensed installer. We plan it and get it inspected.
Range that tips forward when the oven door opens
If you can rock the range by leaning on the door, it isn't anchored. We add the maker's bracket and slide the unit back until it locks in.
Switching from gas to induction
Induction usually needs a 240-volt circuit with more capacity than an old outlet provides. An electrician checks the panel, runs the circuit and we cap the gas line at the valve.
Downdraft or venting questions
If the old hood is too small or only recirculates, a new range may be the moment to upgrade the ventilation as well.
Electric range with a mismatched cord or outlet
Older homes may have a three-prong range outlet while new ranges are set up for four-wire. We fit the correct cord for your wiring per the maker's instructions.
What the install includes
- Supply and opening checkA check of gas valve or breaker, outlet type, cutout size and clearances.
- Disconnecting the old applianceWe isolate the supply and take out the old unit without damaging the floor or counter.
- Cabinet and counter adjustmentsOpenings trimmed or reinforced so the new appliance fits and is supported.
- Gas connectionGas hookup with a new connector, each joint checked with a leak detector solution.
- Electrical connectionCord or hardwire connection to a circuit sized for the appliance; new circuits are run by an electrician.
- Wall oven and cooktop mountingWall ovens fastened into the cabinet; cooktops set and clamped into the counter.
- Haul-away and cleanupWe remove the old unit, cartons and debris.
What to pick before the install
Induction cooktops and rangesFast, precise heat through magnetic cookware; usually needs a 240-volt circuit with enough capacity.
Pro-style rangesLarger 36- and 48-inch ranges that often call for a stronger hood.
Freestanding rangesFinished sides, controls on the backguard, the easiest to install and replace.
Gas and electric cooktopsDrop-in cooktops in the counter, with gas, radiant electric or induction heat.
Gas, electric and dual-fuelPick the fuel by what you cook and what your kitchen has; dual-fuel combines both.
Before and after: kitchens near Itasca
Before
Installed
DetailItasca kitchen, two-story colonial from the 1990s: oven, range & cooktop installation
The site: a two-story colonial from the 1990s near Nordic Park. The kitchen as it was: almond appliances. What bothered the owners most: a decades-old stove that was hard to keep lit. The result: a new stainless range installed level with a new gas connector. The job covered disconnecting the old appliance, cabinet and counter adjustments, plus wall oven and cooktop mounting.
Before
AfterBefore and after: a 1980s two-story in Wood Dale
The site: a 1980s two-story in Wood Dale. What we started with: white appliances. The main complaint was an old stove that needed replacing. The result: a new stainless range installed level with a new gas connector. Work included supply and opening check, cabinet and counter adjustments, plus gas connection.
Oven, Range & Cooktop Installation in Wood Dale →
Before
AfterBefore and after: a 1980s two-story in Itasca
Finished: cabinets in light butter yellow with satin brass pulls, warm walnut butcher block counters, a gray beveled subway tile backsplash, black-and-white checkerboard tile flooring and two glass pendants and recessed lights.
Kitchen Remodeling in Itasca →
Before
AfterItasca kitchen, two-story colonial from the 1990s: kitchen cabinet painting
What changed: the same doors sprayed in deep navy, new brushed nickel bar pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Itasca →From the old unit to the new one
- Model and photosTell us what you're installing, and show us the current hookup.
- Readiness checkWe confirm the gas supply or circuit, the cutout and the clearances, and flag any permit work.
- Written estimateA clear written price with any permit, gas or circuit work listed separately.
- Install and testWe install, check for leaks, test heat and haul away the old appliance.
Oven, Range & Cooktop Installation questions from Itasca homeowners
How much does range or oven installation cost?
A range swap on an existing hookup and a wall oven with a new circuit are very different jobs. You get a line-item quote before work starts.
Does a wall oven need its own circuit?
A dedicated circuit is standard. The required size is on the oven's nameplate and installation guide.
What is an anti-tip bracket and do I need one?
It's a small metal bracket behind the rear leg. Every freestanding and slide-in range should have one engaged.
Do you install ranges and ovens I bought elsewhere?
Yes. We install appliances from any store or online seller.
Can I switch to induction in an older Itasca home?
Usually. The key question is whether the panel has room for a new 240-volt circuit; some older homes need a service upgrade first.
Do I need a Itasca-registered contractor for range or oven installation?
Contractors must register with the Village and be bonded before a permit is issued; Certificate of Insurance naming the Village required. We take care of that before work starts.
Does Itasca require a licensed electrician for range or oven installation?
Electrical contractors must hold a State of Illinois electrical license and post a $5,000 Code Compliance Bond to register with the Village. New circuits and wiring are done by licensed electricians.
What happens to the old appliance in Itasca?
Republic Services handles weekly curbside residential collection; page gives no bulk/appliance/Freon rules. If you'd rather not deal with it, we haul old units and debris away.
Itasca building permit for range or oven installation: where do I apply?
Permits go through Community Development Department (Building Division), phone (630) 773-5568. When your scope needs one, we prepare the application and schedule the inspections.
Can you do range or oven installation in an Itasca condo?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
Do you work in my part of Itasca?
Yes. Our crews work across Itasca, including North Side, South Side, Nordic Park, The Ranchettes — ZIP 60143 — and nearby Wood Dale, Elk Grove Village, Addison.
Working in Itasca
- A lot of Itasca kitchens date from the 1970s. We know these layouts well and what is worth keeping.
- Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.
- Live in the Itasca Historic District? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
North SideSouth SideNordic ParkThe RanchettesItasca Historical DistrictWalnut Street downtown
ZIP 60143
Oven, Range & Cooktop Installation nearby
Other kitchen services in Itasca
Dishwasher InstallationOld unit out, new dishwasher connected, leveled and leak-tested.
Built-In Refrigerator InstallationBuilt-in and panel-ready fridges fitted flush, anchored and connected.
Microwave InstallationOver-the-range, drawer and built-in microwaves mounted, powered and vented.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.