1990s wall oven and cooktop combo
A 1990s built-in oven and drop-in cooktop can usually be replaced in place, though cutouts and wiring often need updating.
Serving Aurora & nearby Batavia, Warrenville
Oven, Range & Cooktop Installation in Aurora, IL
We install gas and electric ranges, wall ovens and cooktops in Aurora, connected safely, leveled and checked before we go.
- Installers working in Aurora ZIP 60506, 60502, 60505, 60504, 60503
- Hookups by licensed trades where the code calls for it
- Old unit hauled away on request
Range, oven and cooktop installs we handle in Aurora
Gas ranges, slide-in electrics, induction cooktops and double wall ovens each need something different behind them: a gas shutoff and connector, a 240-volt circuit of the right size, or an exact cabinet cutout. Our Aurora installers sort out what your kitchen has and what the new appliance needs.
Switching from electric to gas
Going from an electric range to gas means running a new gas line to the kitchen, which needs a permit and a licensed installer. We plan it and get it inspected.
Switching from gas to induction
Many owners want to leave gas behind. The first question is whether your electrical service can carry an induction range; we find out before you buy.
Double wall oven on an undersized circuit
Older wiring to a wall oven is often too light for a modern double unit. We confirm the circuit and have it upgraded when needed.
Downdraft or venting questions
If the old hood is too small or only recirculates, a new range may be the moment to upgrade the ventilation as well.
Old gas connector that shouldn't be reused
Reusing the old flex line saves nothing if it fails. A new certified connector goes on with the new range, and the shutoff valve is checked too.
Wall oven doesn't fit the old cabinet
Replacing a decades-old wall oven often means resizing the cabinet. We adjust the cutout so the trim covers it cleanly.
Slide-in range that won't sit flush
Slide-in ranges have to fit the counter edge and the cabinet sides closely. We check the opening, trim the anti-tip setup and level the unit until the side trim sits tight.
Included with the install
- Disconnecting the old applianceGas or power off, the old range, oven or cooktop disconnected and removed.
- Cabinet and counter adjustmentsWall oven boxes and cooktop cutouts resized to the maker's spec when needed.
- Gas connectionNew flexible connector and fittings on the shutoff, made by a qualified installer to local code and leak-tested.
- Anti-tip bracket and levelingBracket installed, feet adjusted until the oven racks sit level.
- Wall oven and cooktop mountingWall ovens fastened into the cabinet; cooktops set and clamped into the counter.
- Burner, element and oven testEvery burner lit and checked for flame, every element and oven mode heated.
- Haul-away and cleanupWe remove the old unit, cartons and debris.
Models, parts and fittings
Slide-in and front-control rangesRanges that sit flush with the cabinets and need a closer fit.
Gas, electric and dual-fuelPick the fuel by what you cook and what your kitchen has; dual-fuel combines both.
Freestanding rangesThe standard range type that stands between cabinets or at the end of a run.
Gas and electric cooktopsDrop-in cooktops in the counter, with gas, radiant electric or induction heat.
Induction cooktops and rangesElectric cooking with quick response and a cool glass top around the pan.
Before and after: kitchens near Aurora
Before
Installed
DetailAn Aurora 1990s two-story colonial: before and after
A 1990s two-story colonial near West Side, a typical kitchen for Aurora. Before: black appliances. The main complaint was a new range waiting to be connected. The result: a new stainless range installed level with a new gas connector. On site this meant disconnecting the old appliance, anti-tip bracket and leveling, plus burner, element and oven test.
Before
AfterOven, Range & Cooktop Installation in a two-story colonial from the 1990s, Batavia
The site: a two-story colonial from the 1990s in Batavia. What we started with: almond appliances. The reason for the call: an old range they no longer trusted. After: a new stainless range installed level with a new gas connector. The job covered cabinet and counter adjustments, anti-tip bracket and leveling, plus burner, element and oven test.
Oven, Range & Cooktop Installation in Batavia →
Before
AfterBefore and after: a 1990s two-story colonial in Warrenville
The site: a 1990s two-story colonial in Warrenville. Before: white appliances. What bothered the owners most: a new range waiting to be connected. The result: a new stainless range installed level with a new gas connector. On site this meant cabinet and counter adjustments, gas connection, plus burner, element and oven test.
Oven, Range & Cooktop Installation in Warrenville →
Before
AfterBefore and after: a 1990s two-story colonial in Aurora
What changed: cabinets in white uppers and deep green lowers with unlacquered brass knobs and cup pulls, warm walnut butcher block counters, a green zellige-look tile backsplash, warm oak luxury vinyl plank flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Aurora →
Before
AfterBefore and after: a 1980s two-story in Aurora
The same doors sprayed in creamy white uppers and navy lowers, new matte black pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Aurora →From the old unit to the new one
- Model and photosSend the model number and photos of the space, the shutoff or outlet behind the old unit.
- Readiness checkWe compare your kitchen with the installation guide and list what needs to change.
- Written estimateA clear written price with any permit, gas or circuit work listed separately.
- Install and testWe install, check for leaks, test heat and haul away the old appliance.
Oven, Range & Cooktop Installation questions from Aurora homeowners
Can you replace a cooktop with a different size?
We can. Laminate and wood cutouts are adjusted on site; stone is recut by a fabricator.
Does a gas range need to be professionally installed?
It's the safer route. Gas work is regulated, and a proper install includes a leak test and the anti-tip bracket.
Do you install ranges and ovens I bought elsewhere?
Yes. Many of our installs are units the owner purchased on their own.
Can a gas range be converted to propane?
Many ranges include or offer a conversion kit, and the conversion should be done by a qualified installer per the maker's instructions.
What is an anti-tip bracket and do I need one?
It's a small metal bracket behind the rear leg. Every freestanding and slide-in range should have one engaged.
Aurora building permit for range or oven installation: where do I apply?
Permits go through Division of Building and Permits, City of Aurora, phone (630) 256-3130. When your scope needs one, we prepare the application and schedule the inspections.
What does Aurora ask for on electrical work?
City tests electrical contractors (ICC Standard Residential/Master Electrician accepted in lieu of testing). Electrical work over $500 requires a licensed Electrical Contractor, even for owner-occupants. New circuits and wiring are done by licensed electricians.
Aurora contractor registration: do kitchen contractors need it?
Contractors must be registered/licensed with the City (application, required testing if applicable, proof of insurance naming the City as additional insured). Homeowners may act as own contractor if owner-occupied 6+ months with a Homeowner Liability Waiver. We take care of that before work starts.
What happens to the old appliance in Aurora?
Appliances (refrigerators, stoves, water heaters) must be scheduled with hauler Groot, 630-892-9294, and carry one sticker; bulk items need stickers ($2.75 each) and bundles max 2 ft x 4 ft x 50 lb. If you'd rather not deal with it, we haul old units and debris away.
Do I need a permit for range or oven installation in Aurora?
It depends on the scope. Aurora's rule in short: Interior remodels, structural changes and interior plumbing always need a permit; electrical/mechanical may. We handle the permit when one is needed with Division of Building and Permits, City of Aurora.
Do you work in my part of Aurora?
Yes. Our crews work across Aurora, including Near Eastside, Tanner, Riddle Highlands, Palace Street — ZIP 60506, 60502, 60505, 60504, 60503 — and nearby Batavia, Warrenville, Naperville.
Working in Aurora
- A lot of Aurora kitchens date from the 1990s. We know these layouts well and what is worth keeping.
- Most Aurora homes are single-family. We protect floors and driveways and leave the site clean every day.
- Live in a historic district? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
Near EastsideTannerRiddle HighlandsPalace StreetWest SideFar East Side
ZIP 60506ZIP 60502ZIP 60505ZIP 60504ZIP 60503
Oven, Range & Cooktop Installation nearby
Other kitchen services in Aurora
Dishwasher InstallationOld unit out, new dishwasher connected, leveled and leak-tested.
Built-In Refrigerator InstallationBuilt-in and panel-ready fridges fitted flush, anchored and connected.
Microwave InstallationOver-the-range, drawer and built-in microwaves mounted, powered and vented.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.