1990s wall oven and cooktop combo
Kitchens from the 1990s often have a built-in wall oven and a separate cooktop. We replace them with modern units sized to the old cutouts or rework the cabinets.
Serving Batavia & nearby Geneva, St. Charles
Oven, Range & Cooktop Installation in Batavia, IL
We install gas and electric ranges, wall ovens and cooktops in Batavia, connected safely, leveled and checked before we go.
- Installers working in Batavia ZIP 60510, 60539
- Hookups by licensed trades where the code calls for it
- Old unit hauled away on request
Range, oven and cooktop installs we handle in Batavia
Gas ranges, slide-in electrics, induction cooktops and double wall ovens each need something different behind them: a gas shutoff and connector, a 240-volt circuit of the right size, or an exact cabinet cutout. Our Batavia installers sort out what your kitchen has and what the new appliance needs.
Slide-in range that won't sit flush
Slide-in ranges have to fit the counter edge and the cabinet sides closely. We check the opening, trim the anti-tip setup and level the unit until the side trim sits tight.
Cooktop cutout in the wrong size
A new cooktop rarely matches the old hole. We enlarge laminate or wood openings, and stone cutouts are recut by a fabricator when needed.
Switching from gas to induction
Induction usually needs a 240-volt circuit with more capacity than an old outlet provides. An electrician checks the panel, runs the circuit and we cap the gas line at the valve.
Switching from electric to gas
If there's no gas at the range today, a new branch line has to be run from the supply, pressure-tested and inspected before a gas range can go in.
Range that tips forward when the oven door opens
Missing anti-tip brackets are common on older installs. We fasten one to the floor or wall and check it holds before we leave.
Double wall oven on an undersized circuit
Older wiring to a wall oven is often too light for a modern double unit. We confirm the circuit and have it upgraded when needed.
Wall oven doesn't fit the old cabinet
If the new wall oven is too tall or too deep for the old box, we rework the cabinet opening and add a support shelf rated for the weight.
What the install includes
- Supply and opening checkA check of gas valve or breaker, outlet type, cutout size and clearances.
- Disconnecting the old applianceWe isolate the supply and take out the old unit without damaging the floor or counter.
- Cabinet and counter adjustmentsOpenings trimmed or reinforced so the new appliance fits and is supported.
- Gas connectionNew flexible connector and fittings on the shutoff, made by a qualified installer to local code and leak-tested.
- Anti-tip bracket and levelingAnti-tip bracket fastened and engaged, range leveled side to side and front to back.
- Wall oven and cooktop mountingBuilt-in units secured with the maker's brackets and screws.
- Burner, element and oven testWe run the cooktop and oven so you see it working before we leave.
Models, parts and fittings
Gas and electric cooktopsCooktops set into the counter, often paired with a wall oven.
Pro-style rangesWide, heavy ranges with high-output burners and specific gas and clearance needs.
Freestanding rangesThe standard range type that stands between cabinets or at the end of a run.
Single and double wall ovensOvens built into a cabinet at a comfortable height, alone or stacked with a second oven or a microwave.
Slide-in and front-control rangesRanges that sit flush with the cabinets and need a closer fit.
Kitchens like yours in Batavia: before and after
Before
Installed
DetailBatavia kitchen, two-story colonial from the 1990s: oven, range & cooktop installation
A two-story colonial from the 1990s in Batavia, a typical kitchen for Batavia. Before: almond appliances. The reason for the call: a decades-old stove that was hard to keep lit. After: a new stainless range installed level with a new gas connector. The job covered supply and opening check, disconnecting the old appliance, plus gas connection.
Before
AfterOven, Range & Cooktop Installation in a 1990s two-story colonial, Geneva
The site: a 1990s two-story colonial near Mill Creek. The kitchen as it was: black appliances. The reason for the call: a new range waiting to be connected. The result: a new stainless range installed level with a new gas connector. On site this meant anti-tip bracket and leveling, wall oven and cooktop mounting, plus burner, element and oven test.
Oven, Range & Cooktop Installation in Geneva →
Before
AfterBefore and after: a two-story colonial from the 1990s in Batavia
Finished: cabinets in pale sage with unlacquered brass knobs and cup pulls, charcoal concrete-look quartz counters, a terracotta-look square tile backsplash, light oak hardwood flooring and black cage pendants and slim recessed lights.
Kitchen Remodeling in Batavia →
Before
AfterBatavia kitchen, two-story colonial from the 1990s: kitchen cabinet painting
Finished: the same doors sprayed in forest green, new satin brass pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Batavia →Install day
- Model and photosTell us what you're installing, and show us the current hookup.
- Readiness checkWe confirm the gas supply or circuit, the cutout and the clearances, and flag any permit work.
- Written estimateA clear written price with any permit, gas or circuit work listed separately.
- Install and testWe install, check for leaks, test heat and haul away the old appliance.
Oven, Range & Cooktop Installation questions from Batavia homeowners
Can I switch to induction in an older Batavia home?
Usually. The key question is whether the panel has room for a new 240-volt circuit; some older homes need a service upgrade first.
Does a wall oven need its own circuit?
They do. If your circuit is undersized for the new oven, an electrician upgrades it before installation.
Can you replace a cooktop with a different size?
Yes, but the counter has to match. Larger cooktops mean enlarging the cutout; smaller ones may need a filler or counter repair.
What is an anti-tip bracket and do I need one?
Yes. It keeps a range from tipping when weight is put on an open oven door, and it's part of the maker's instructions.
How much does range or oven installation cost?
It depends on the appliance type, gas or electric, any cabinet or counter changes and whether a gas line or circuit is needed. We give a written, itemized estimate after looking at your setup.
What is the Batavia building department phone number?
Permits go through City of Batavia Community & Economic Development - Building Division, phone 630-454-2700. When your scope needs one, we prepare the application and schedule the inspections.
Can Batavia bulk pickup take my old appliance or cabinets?
Refrigerators (doors removed), water heaters (drained) and dishwashers set out by calling hauler 630-587-8282 at least one day ahead, one refuse sticker each. Freon appliances arranged through the hauler. If you'd rather not deal with it, we haul old units and debris away.
Do I need a permit for range or oven installation in Batavia?
It depends on the scope. Batavia's rule in short: Building permits are required for all construction; a Residential Alteration handout is available. We handle the permit when one is needed with City of Batavia Community & Economic Development - Building Division.
Do you work in my part of Batavia?
Yes. Our crews work across Batavia — ZIP 60510, 60539 — and nearby Geneva, St. Charles, West Chicago.
Working in Batavia
- A lot of Batavia kitchens date from the 1990s. We know these layouts well and what is worth keeping.
- Most Batavia homes are single-family. We protect floors and driveways and leave the site clean every day.
- Live in the Downtown Historic District? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
ZIP 60510ZIP 60539
Oven, Range & Cooktop Installation nearby
Other kitchen services in Batavia
Dishwasher InstallationOld unit out, new dishwasher connected, leveled and leak-tested.
Built-In Refrigerator InstallationBuilt-in and panel-ready fridges fitted flush, anchored and connected.
Microwave InstallationOver-the-range, drawer and built-in microwaves mounted, powered and vented.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.