Serving Naperville & nearby Lisle, Warrenville

Oven, Range & Cooktop Installation in Naperville, IL

We install gas and electric ranges, wall ovens and cooktops in Naperville, connected safely, leveled and checked before we go.

  • Installers working in Naperville ZIP 60540, 60563, 60564, 60565
  • Hookups by licensed trades where the code calls for it
  • Old unit hauled away on request

Prefer a callback?

Leave your number and a Naperville range and oven installer will call you.

Range, oven and cooktop installs we handle in Naperville

A new range has to do more than fit the gap. In Naperville we check the gas or electrical supply first, connect the unit per the maker's instructions, put in the anti-tip bracket, level it and test every burner or element before calling it done.

1990s wall oven and cooktop combo

Original 1990s wall ovens leave odd-sized openings. We match a new oven to the box or adjust the cabinet to fit.

Double wall oven on an undersized circuit

Before a bigger wall oven goes in, the breaker and wire size must match the maker's spec. If they don't, an electrician corrects them.

Downdraft or venting questions

If the old hood is too small or only recirculates, a new range may be the moment to upgrade the ventilation as well.

Wall oven doesn't fit the old cabinet

If the new wall oven is too tall or too deep for the old box, we rework the cabinet opening and add a support shelf rated for the weight.

Switching from electric to gas

Going from an electric range to gas means running a new gas line to the kitchen, which needs a permit and a licensed installer. We plan it and get it inspected.

Cooktop cutout in the wrong size

Cutout dimensions come from the installation guide, not the old cooktop. We check them against your counter before you order.

Old gas connector that shouldn't be reused

Reusing the old flex line saves nothing if it fails. A new certified connector goes on with the new range, and the shutoff valve is checked too.

Slide-in range that won't sit flush

A slide-in is less forgiving than a freestanding range. We measure the cutout first and set the unit so its cooktop overlaps the counter evenly.

What the install includes

  • Supply and opening checkA check of gas valve or breaker, outlet type, cutout size and clearances.
  • Disconnecting the old applianceGas or power off, the old range, oven or cooktop disconnected and removed.
  • Cabinet and counter adjustmentsOpenings trimmed or reinforced so the new appliance fits and is supported.
  • Gas connectionNew flexible connector and fittings on the shutoff, made by a qualified installer to local code and leak-tested.
  • Electrical connectionThe appliance tied into the correct 240-volt or 120-volt supply, with panel and circuit work handled by an electrician.
  • Anti-tip bracket and levelingBracket installed, feet adjusted until the oven racks sit level.
  • Haul-away and cleanupThe old appliance and packaging leave with us, and the area is wiped down.

What to pick before the install

Induction cooktops and rangesFast, precise heat through magnetic cookware; usually needs a 240-volt circuit with enough capacity.
Gas, electric and dual-fuelPick the fuel by what you cook and what your kitchen has; dual-fuel combines both.
Gas and electric cooktopsCooktops set into the counter, often paired with a wall oven.
Pro-style rangesLarger 36- and 48-inch ranges that often call for a stronger hood.
Slide-in and front-control rangesRanges that sit flush with the cabinets and need a closer fit.

Kitchens like yours in Naperville: before and after

Oven, Range & Cooktop Installation in a 1980s-1990s two-story colonial / tract house — beforeBefore
Oven, Range & Cooktop Installation in a 1980s-1990s two-story colonial / tract house — installedInstalled
Oven, Range & Cooktop Installation in a 1980s-1990s two-story colonial / tract house — detailDetail

A Naperville two-story colonial from the 1990s: before and after

The site: a two-story colonial from the 1990s near Highlands. What we started with: black appliances. The main complaint was an old stove that needed replacing. The result: a new stainless range installed level with a new gas connector. The job covered supply and opening check, gas connection, plus haul-away and cleanup.

Oven, Range & Cooktop Installation project in Lisle, beforeBefore
Oven, Range & Cooktop Installation project in Lisle, afterAfter

Before and after: a 1990s two-story colonial in Lisle

This one is a 1990s two-story colonial near The Meadows. The kitchen as it was: almond appliances. The reason for the call: a decades-old stove that was hard to keep lit. After: a new stainless range installed level with a new gas connector. The job covered gas connection, electrical connection, plus haul-away and cleanup.

Oven, Range & Cooktop Installation in Lisle →
Oven, Range & Cooktop Installation project in Warrenville, beforeBefore
Oven, Range & Cooktop Installation project in Warrenville, afterAfter

Warrenville kitchen, two-story colonial from the 1990s: oven, range & cooktop installation

This one is a two-story colonial from the 1990s in Warrenville. The kitchen as it was: white appliances. What bothered the owners most: a new range waiting to be connected. Finished kitchen: a new stainless range installed level with a new gas connector. On site this meant supply and opening check, cabinet and counter adjustments, plus electrical connection.

Oven, Range & Cooktop Installation in Warrenville →
Kitchen Remodeling project near Naperville, beforeBefore
Kitchen Remodeling project near Naperville, afterAfter

A Naperville 1980s two-story: before and after

Finished: cabinets in light butter yellow with satin brass pulls, charcoal concrete-look quartz counters, a terracotta-look square tile backsplash, gray wood-look porcelain plank flooring and two glass pendants and recessed lights.

Kitchen Remodeling in Naperville →
Kitchen Cabinet Painting project near Naperville, beforeBefore
Kitchen Cabinet Painting project near Naperville, afterAfter

A Naperville 1990s two-story colonial: before and after

The same doors sprayed in pale mint green, new matte black pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Naperville →

Install day

  1. Model and photosTell us what you're installing, and show us the current hookup.
  2. Readiness checkWe compare your kitchen with the installation guide and list what needs to change.
  3. Written estimateAn itemized estimate for removal, installation, parts and any gas line or electrical work.
  4. Install and testWe install, check for leaks, test heat and haul away the old appliance.

Oven, Range & Cooktop Installation questions from Naperville homeowners

Do I need a permit to install a gas range in Naperville?
A like-for-like swap usually doesn't; a new or extended gas line normally needs a permit and inspection. We check locally.
Can a gas range be converted to propane?
If the model supports it, a qualified installer converts it with the manufacturer's kit.
Do you install ranges and ovens I bought elsewhere?
Yes. Many of our installs are units the owner purchased on their own.
Can you install a wall oven in my existing cabinet?
Often, if the cutout is close to the new oven's spec. Otherwise we enlarge or fill the opening and make sure the support shelf carries the weight.
Will you haul away my old stove?
Yes. We disconnect it, cap or prepare the supply and take the old range or oven with us.
Does range or oven installation need a Naperville building permit, and who files it?
Permits go through Transportation, Engineering and Development (TED) Business Group, Building Permits, phone (630) 420-6100, Option 2. When your scope needs one, we prepare the application and schedule the inspections.
What does Naperville ask for on electrical work?
City guide says electricians must be licensed; it advises insisting on seeing a current license. New circuits and wiring are done by licensed electricians.
Can Naperville bulk pickup take my old appliance or cabinets?
Hauler Groot Industries (630-892-9294): two bulk items/week free; one appliance/week free but call ahead. If you'd rather not deal with it, we haul old units and debris away.
Do I need a permit for range or oven installation in Naperville?
It depends on the scope. Naperville's rule in short: Remodeling such as kitchens requires a permit, as do electrical work (minor repairs and low-voltage excepted), plumbing pipe/fixture installation or rearrangement, and structural changes. We handle the permit when one is needed with Transportation, Engineering and Development (TED) Business Group, Building Permits.
Do you work in my part of Naperville?
Yes. Our crews work across Naperville, including Downtown Naperville, Highlands, Tamarack — ZIP 60540, 60563, 60564, 60565 — and nearby Lisle, Warrenville, Bolingbrook.

Working in Naperville

  • A lot of Naperville kitchens date from the 1990s. We know these layouts well and what is worth keeping.
  • Most Naperville homes are single-family. We protect floors and driveways and leave the site clean every day.
  • Live in the Naperville Historic District? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.

Downtown NapervilleHighlandsTamarack

ZIP 60540ZIP 60563ZIP 60564ZIP 60565

Oven, Range & Cooktop Installation nearby

Planning a kitchen project in Naperville?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback