1970s wall oven and cooktop combo
Kitchens from the 1970s often have a built-in wall oven and a separate cooktop. We replace them with modern units sized to the old cutouts or rework the cabinets.
Serving Roselle & nearby Bloomingdale, Hanover Park
Oven, Range & Cooktop Installation in Roselle, IL
We install gas and electric ranges, wall ovens and cooktops in Roselle, connected safely, leveled and checked before we go.
- Installers working in Roselle ZIP 60172
- Hookups by licensed trades where the code calls for it
- Old unit hauled away on request
Range, oven and cooktop installs we handle in Roselle
Swapping a stove sounds quick, and often it is. When it isn't, the reason is usually an old flex connector, a circuit too small for a new wall oven, or a cooktop cutout that doesn't match. We take care of those details in Roselle kitchens so the appliance works safely from day one.
Pro-style range that needs more gas and space
A 36- or 48-inch range is heavier and hungrier than a standard one. We look at the floor, the gas supply and the hood before install day.
Downdraft or venting questions
A cooktop with downdraft venting needs space in the base cabinet and a duct path. We check both before choosing a model.
Old gas connector that shouldn't be reused
Flexible gas connectors aren't meant to be moved and reused for decades. We install a new one sized for the appliance with every range swap.
Electric range with a mismatched cord or outlet
Older homes may have a three-prong range outlet while new ranges are set up for four-wire. We fit the correct cord for your wiring per the maker's instructions.
Switching from electric to gas
Going from an electric range to gas means running a new gas line to the kitchen, which needs a permit and a licensed installer. We plan it and get it inspected.
Range that tips forward when the oven door opens
A freestanding or slide-in range without an anti-tip bracket can tip with weight on the open door. We install the bracket and confirm the rear foot engages it.
Cooktop cutout in the wrong size
If the new cooktop is bigger than the old one, the counter has to be cut; if it's smaller, a filler kit or new counter section may be required.
What the install includes
- Disconnecting the old applianceGas or power off, the old range, oven or cooktop disconnected and removed.
- Cabinet and counter adjustmentsWall oven boxes and cooktop cutouts resized to the maker's spec when needed.
- Gas connectionGas hookup with a new connector, each joint checked with a leak detector solution.
- Electrical connectionCord or hardwire connection to a circuit sized for the appliance; new circuits are run by an electrician.
- Anti-tip bracket and levelingAnti-tip bracket fastened and engaged, range leveled side to side and front to back.
- Burner, element and oven testEvery burner lit and checked for flame, every element and oven mode heated.
- Haul-away and cleanupThe old appliance and packaging leave with us, and the area is wiped down.
What to pick before the install
Gas and electric cooktopsDrop-in cooktops in the counter, with gas, radiant electric or induction heat.
Single and double wall ovensOvens built into a cabinet at a comfortable height, alone or stacked with a second oven or a microwave.
Induction cooktops and rangesElectric cooking with quick response and a cool glass top around the pan.
Pro-style rangesLarger 36- and 48-inch ranges that often call for a stronger hood.
Freestanding rangesFinished sides, controls on the backguard, the easiest to install and replace.
Kitchens like yours in Roselle: before and after
Before
Installed
DetailA Roselle 1990s two-story colonial: before and after
This one is a 1990s two-story colonial in Roselle. What we started with: almond appliances. What bothered the owners most: a decades-old stove that was hard to keep lit. After: a new stainless range installed level with a new gas connector. On site this meant disconnecting the old appliance, anti-tip bracket and leveling, plus burner, element and oven test.
Before
AfterBefore and after: a 1980s two-story in Bloomingdale
This one is a 1980s two-story near Old Town Bloomingdale. What we started with: white appliances. The main complaint was an old stove that needed replacing. After: a new stainless range installed level with a new gas connector. The job covered disconnecting the old appliance, anti-tip bracket and leveling, plus haul-away and cleanup.
Oven, Range & Cooktop Installation in Bloomingdale →
Before
AfterOven, Range & Cooktop Installation in a 1980s two-story, Hanover Park
The site: a 1980s two-story near Ontarioville. What we started with: black appliances. The reason for the call: an old stove that needed replacing. Finished kitchen: a new stainless range installed level with a new gas connector. The job covered disconnecting the old appliance, burner, element and oven test, plus haul-away and cleanup.
Oven, Range & Cooktop Installation in Hanover Park →
Before
AfterBefore and after: a raised ranch in Roselle
Finished: cabinets in light greige with brushed nickel bar pulls, light marble-look quartz counters, a terracotta-look square tile backsplash, black-and-white checkerboard tile flooring and two glass pendants and recessed lights.
Kitchen Remodeling in Roselle →
Before
AfterA Roselle 1970s tract home: before and after
Finished: the same doors sprayed in deep navy, new satin brass pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Roselle →From the old unit to the new one
- Model and photosTell us what you're installing, and show us the current hookup.
- Readiness checkWe compare your kitchen with the installation guide and list what needs to change.
- Written estimateAn itemized estimate for removal, installation, parts and any gas line or electrical work.
- Install and testOld unit out, new one connected, anchored, leveled and tested burner by burner.
Oven, Range & Cooktop Installation questions from Roselle homeowners
Can a gas range be converted to propane?
Often yes, using the maker's LP kit. The orifices and regulator are changed, then the burners are tested.
How much does range or oven installation cost?
It depends on the appliance type, gas or electric, any cabinet or counter changes and whether a gas line or circuit is needed. We give a written, itemized estimate after looking at your setup.
Can you install a wall oven in my existing cabinet?
Usually, with some adjustment. We compare the maker's cutout drawing to your cabinet first.
Does a wall oven need its own circuit?
They do. If your circuit is undersized for the new oven, an electrician upgrades it before installation.
Does a gas range need to be professionally installed?
We recommend it. A gas range needs a new connector, tight joints, a leak check, an anti-tip bracket and a burner test.
What is the Roselle building department phone number?
Permits go through Development & Engineering Services (Building & Zoning), phone 630-671-2821. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a Roselle-registered contractor for range or oven installation?
Contractors must register with the Village via Cloudpermit and be licensed: surety bond, certificate of insurance naming the Village, $75 fee. We take care of that before work starts.
What does Roselle ask for on electrical work?
Plumbing, electrical and roofing contractors must hold either a state or local license; general contractor and all subs must hold a Village license. New circuits and wiring are done by licensed electricians.
Can Roselle bulk pickup take my old appliance or cabinets?
Flood Brothers takes one bulk item per week at no charge; appliances (white goods) collected for a fee. If you'd rather not deal with it, we haul old units and debris away.
Do I need a permit for range or oven installation in Roselle?
It depends on the scope. Roselle's rule in short: Permit required for projects including bathroom and kitchen remodeling, electrical and plumbing work; also water heater, roof, HVAC. We handle the permit when one is needed with Development & Engineering Services (Building & Zoning).
Do you work in my part of Roselle?
Yes. Our crews work across Roselle — ZIP 60172 — and nearby Bloomingdale, Hanover Park, Schaumburg.
Working in Roselle
- A lot of Roselle kitchens date from the 1970s. We know these layouts well and what is worth keeping.
- Most Roselle homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Development & Engineering Services (Building & Zoning) handles kitchen permits and pull them for you.
ZIP 60172
Oven, Range & Cooktop Installation nearby
Other kitchen services in Roselle
Dishwasher InstallationOld unit out, new dishwasher connected, leveled and leak-tested.
Built-In Refrigerator InstallationBuilt-in and panel-ready fridges fitted flush, anchored and connected.
Microwave InstallationOver-the-range, drawer and built-in microwaves mounted, powered and vented.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.