1950s wall oven and cooktop combo
Original 1950s wall ovens leave odd-sized openings. We match a new oven to the box or adjust the cabinet to fit.
Serving Villa Park & nearby Elmhurst, Lombard
Oven, Range & Cooktop Installation in Villa Park, IL
We install gas and electric ranges, wall ovens and cooktops in Villa Park, connected safely, leveled and checked before we go.
- Installers working in Villa Park ZIP 60181
- Hookups by licensed trades where the code calls for it
- Old unit hauled away on request
Range, oven and cooktop installs we handle in Villa Park
A new range has to do more than fit the gap. In Villa Park we check the gas or electrical supply first, connect the unit per the maker's instructions, put in the anti-tip bracket, level it and test every burner or element before calling it done.
Slide-in range that won't sit flush
A slide-in is less forgiving than a freestanding range. We measure the cutout first and set the unit so its cooktop overlaps the counter evenly.
Downdraft or venting questions
Some cooktops and ranges need a hood above them, and gas cooking makes good ventilation more important. We look at what's there and recommend the right setup.
Switching from electric to gas
If there's no gas at the range today, a new branch line has to be run from the supply, pressure-tested and inspected before a gas range can go in.
New range delivered but not hooked up
If the store left your new stove unconnected, we finish the job: gas or power connected, anti-tip bracket installed, unit leveled and tested.
Double wall oven on an undersized circuit
Before a bigger wall oven goes in, the breaker and wire size must match the maker's spec. If they don't, an electrician corrects them.
Switching from gas to induction
Moving to induction means power, not plumbing. We have the panel capacity checked, the circuit added and the old gas supply safely capped.
Pro-style range that needs more gas and space
A 36- or 48-inch range is heavier and hungrier than a standard one. We look at the floor, the gas supply and the hood before install day.
What the install includes
- Supply and opening checkWe look at the gas shutoff or circuit, measure the opening and compare it to the new unit's specs.
- Cabinet and counter adjustmentsOpenings trimmed or reinforced so the new appliance fits and is supported.
- Gas connectionNew flexible connector and fittings on the shutoff, made by a qualified installer to local code and leak-tested.
- Electrical connectionCord or hardwire connection to a circuit sized for the appliance; new circuits are run by an electrician.
- Anti-tip bracket and levelingAnti-tip bracket fastened and engaged, range leveled side to side and front to back.
- Wall oven and cooktop mountingWall ovens fastened into the cabinet; cooktops set and clamped into the counter.
- Burner, element and oven testWe run the cooktop and oven so you see it working before we leave.
Options to choose from
Pro-style rangesWide, heavy ranges with high-output burners and specific gas and clearance needs.
Gas, electric and dual-fuelGas burners with a gas or electric oven; dual-fuel units need both a gas line and a 240-volt circuit.
Slide-in and front-control rangesRanges that sit flush with the cabinets and need a closer fit.
Gas and electric cooktopsCooktops set into the counter, often paired with a wall oven.
Single and double wall ovensWall ovens need the right cutout, support and a dedicated circuit.
Kitchens like yours in Villa Park: before and after
Before
Installed
DetailOven, Range & Cooktop Installation in a 1980s two-story, Villa Park
The site: a 1980s two-story in Villa Park. Before: almond appliances. The reason for the call: a decades-old stove that was hard to keep lit. Finished kitchen: a new stainless range installed level with a new gas connector. Work included cabinet and counter adjustments, electrical connection, plus burner, element and oven test.
Before
AfterOven, Range & Cooktop Installation in a two-story colonial from the 1990s, Elmhurst
This one is a two-story colonial from the 1990s in Elmhurst. The kitchen as it was: black appliances. What bothered the owners most: an old stove that needed replacing. After: a new stainless range installed level with a new gas connector. On site this meant cabinet and counter adjustments, electrical connection, plus anti-tip bracket and leveling.
Oven, Range & Cooktop Installation in Elmhurst →
Before
AfterOven, Range & Cooktop Installation in a 1980s two-story, Oak Brook
A 1980s two-story in Oak Brook, a typical kitchen for Oak Brook. Before: white appliances. The main complaint was an old stove that needed replacing. Finished kitchen: a new stainless range installed level with a new gas connector. On site this meant gas connection, electrical connection, plus wall oven and cooktop mounting.
Oven, Range & Cooktop Installation in Oak Brook →
Before
AfterKitchen Remodeling in a postwar Cape Cod, Villa Park
Finished: cabinets in light gray uppers and dusty rose lowers with unlacquered brass knobs and cup pulls, light marble-look quartz counters, a gray beveled subway tile backsplash, large-format light stone-look porcelain tile flooring and two glass pendants and recessed lights.
Kitchen Remodeling in Villa Park →
Before
AfterKitchen Cabinet Painting in a 1960s ranch, Villa Park
The same doors sprayed in light warm taupe, new unlacquered brass knobs and cup pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Villa Park →Install day
- Model and photosSend the model number and photos of the space, the shutoff or outlet behind the old unit.
- Readiness checkWe confirm the gas supply or circuit, the cutout and the clearances, and flag any permit work.
- Written estimateA clear written price with any permit, gas or circuit work listed separately.
- Install and testOld unit out, new one connected, anchored, leveled and tested burner by burner.
Oven, Range & Cooktop Installation questions from Villa Park homeowners
Does a gas range need to be professionally installed?
Connecting gas should be done by a qualified installer per local code, followed by a leak test. Mistakes here are a safety risk, not just an inconvenience.
Will you haul away my old stove?
Yes, haul-away is available with any installation.
Do I need a permit to install a gas range in Villa Park?
Swapping a range onto an existing gas outlet often doesn't need one, but running a new gas line does. We confirm the Villa Park rules before starting.
How much does range or oven installation cost?
The fuel type, cutout work, new gas line or circuit and haul-away drive the price. We put it in writing after the visit.
Do you install ranges and ovens I bought elsewhere?
Yes. Many of our installs are units the owner purchased on their own.
What is the Villa Park building department phone number?
Permits go through Permitting Division, Community & Economic Development, phone 630-433-4300. When your scope needs one, we prepare the application and schedule the inspections.
What happens to the old appliance in Villa Park?
Hauler is Lakeshore Recycling Systems (LRS). Bulk items collected loose on regular day. If you'd rather not deal with it, we haul old units and debris away.
Does Villa Park require a licensed electrician for range or oven installation?
New electrical work must be done by a licensed electrician with current bond and insurance; homeowners may do small repairs like changing outlets or switches. New circuits and wiring are done by licensed electricians.
Do I need a Villa Park-registered contractor for range or oven installation?
No general contractor registration described. Homeowners acting as own general contractor submit a form and homeowner's insurance copy. We take care of that before work starts.
Do I need a permit for range or oven installation in Villa Park?
It depends on the scope. Villa Park's rule in short: Permit required for adding, replacing or relocating plumbing fixtures, electrical or HVAC systems, and for moving or building walls. We handle the permit when one is needed with Permitting Division, Community & Economic Development.
Do you work in my part of Villa Park?
Yes. Our crews work across Villa Park — ZIP 60181 — and nearby Elmhurst, Lombard, Addison.
Working in Villa Park
- A lot of Villa Park kitchens date from the 1950s. We know these layouts well and what is worth keeping.
- Most Villa Park homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Permitting Division, Community & Economic Development handles kitchen permits and pull them for you.
ZIP 60181
Oven, Range & Cooktop Installation nearby
Other kitchen services in Villa Park
Dishwasher InstallationOld unit out, new dishwasher connected, leveled and leak-tested.
Built-In Refrigerator InstallationBuilt-in and panel-ready fridges fitted flush, anchored and connected.
Microwave InstallationOver-the-range, drawer and built-in microwaves mounted, powered and vented.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.