Outlets for an island or peninsula
Islands often need power for small appliances, a microwave drawer or a prep sink disposal. We run the circuit under the floor or through the cabinets and set outlets on the sides or in a pop-up.
Serving 49 Chicago-area suburbs
Kitchen Electrical Work in Chicago & the Suburbs
New circuits, GFCI outlets, island power and panel upgrades for Chicagoland kitchens, done by a licensed electrician and inspected when required.
- Serving the Chicago suburbs, from Naperville to Evanston
- Installed level, sealed and tested before we leave
- Clear price for the install before the visit
Kitchen electrical problems we fix in Chicagoland
Breakers that trip at breakfast, too few outlets along the counter, a new induction range with nowhere to plug in: these are the calls we get from Chicagoland kitchens. A licensed electrician finds the cause, explains the fix and does the wiring to today's code.
Breaker trips when two appliances run
If the breaker drops every time the toaster and kettle run together, too much is sharing one circuit. Today's code usually calls for at least two 20-amp circuits for the counter outlets, and we add what's missing.
Panel that's full or too small
Adding several kitchen circuits to an older panel often needs more capacity. We do a load check and recommend the smallest change that works.
Under-cabinet outlets and power for an appliance garage
An appliance garage or coffee station needs outlets inside the cabinet. We add them on a proper circuit so the toaster can stay plugged in.
Outlets that suddenly stopped working
Outlets that quit without the breaker tripping usually point to a bad splice or a worn receptacle. We open the boxes, find it and repair it.
Flickering or dimming when appliances start
Flicker in the kitchen is a symptom worth checking. It may be a bad switch, a loose neutral or too much on one circuit.
No GFCI protection at the counter
Older kitchens often have plain outlets right next to the sink. We upgrade them to GFCI protection and test each one.
Too few outlets along the counter
If appliances live where the outlet is instead of where you need them, more receptacles fix that. We add them on the right circuits with GFCI protection.
What the install includes
- Circuit mapping and panel checkEvery breaker serving the kitchen is traced and the panel load is reviewed.
- Panel workRoom made in the panel for the kitchen circuits.
- Appliance circuitsIndividual circuits for the appliances that need them, including 240-volt cooking circuits.
- Outlets and boxesOutlets added and placed where the counter is actually used.
- GFCI and AFCI protectionGFCI on counter and sink-area outlets, AFCI where today's code usually requires it.
- InspectionWe meet the inspector and close out the permit.
- Patching and cleanupAccess holes closed up and the work area cleaned, with finish painting by arrangement.
Options to choose from
20-amp counter circuitsHeavier wire and breakers for the outlets that power kettles, toasters and mixers.
GFCI receptacles and breakersProtection that shuts power off in a fraction of a second when current leaks to ground.
Pop-up, under-cabinet and USB outletsWays to add power without cluttering the backsplash.
AFCI and dual-function breakersArc-fault protection that today's code usually asks for on kitchen circuits.
Cable and conduitCopper wiring in cable or metal conduit, depending on what your village requires.
Kitchen Electrical Work across Chicagoland
The same job looks different in a 1920s bungalow, a 1970s split-level and a new subdivision. Here is what we plan for in different parts of the region.
Prewar towns
Knob-and-tube or cloth wiring in an older kitchen
Many older Berwyn and Evanston homes still have knob-and-tube or cloth-covered wiring in the walls. It wasn't designed for kitchen loads, and we replace those runs with new grounded circuits.
Postwar suburbs
Aluminum branch wiring
Aluminum circuits are still found in some houses from that era. We identify them and make every kitchen connection with parts rated for the metal.
Condo and townhome towns
Condo kitchens with limited panel room
Condo units often have a small panel and wiring in concrete or conduit. We plan new circuits around the building's rules and get management approval where needed.
Oak Park, Arlington Heights, Lombard, Glendale Heights, Itasca, Schaumburg
Recent installs around Chicagoland
Before
AfterKitchen Electrical Work in a 1980s two-story, Lisle
This one is a 1980s two-story near The Meadows. Before: white ceramic tile with dark stained grout lines and white appliances. What bothered the owners most: old two-prong outlets along the counter. Finished kitchen: new GFCI outlets at counter height on a dedicated circuit, cover plates installed. Work included appliance circuits, GFCI and AFCI protection, plus patching and cleanup.
Kitchen Electrical Work in Lisle →
Before
AfterPark Ridge kitchen, two-story colonial from the 1990s: kitchen electrical work
The site: a two-story colonial from the 1990s in Park Ridge. What we started with: white Corian-style solid surface with a yellowed seam and black appliances. The reason for the call: a kitchen circuit that kept tripping. Finished kitchen: new GFCI outlets at counter height on a dedicated circuit, cover plates installed. Work included GFCI and AFCI protection, inspection, plus patching and cleanup.
Kitchen Electrical Work in Park Ridge →
Before
AfterKitchen Electrical Work in a 1990s two-story colonial, Glendale Heights
A 1990s two-story colonial in Glendale Heights, a typical kitchen for Glendale Heights. Before: almond laminate with a backsplash lip and almond appliances. The reason for the call: outlets that tripped whenever two appliances ran. The result: new GFCI outlets at counter height on a dedicated circuit, cover plates installed. The job covered panel work, inspection, plus patching and cleanup.
Kitchen Electrical Work in Glendale Heights →How the install goes
- Tell us what's going wrong or what you're planningShare your remodel plans or the problem you're seeing.
- Site checkA licensed electrician maps the circuits, checks the panel and confirms what the code requires.
- Written estimateA clear written price before any work starts.
- Wiring and inspectionWe do the work, test every outlet and close out the permit.
Kitchen Electrical Work: common questions
Is my panel big enough for a kitchen remodel?
We check before you commit to appliances, so a panel change doesn't surprise you mid-project.
How much does kitchen electrical work cost?
Adding a GFCI outlet and rewiring a kitchen for a remodel are very different jobs. You get a line-item quote first.
Do I need a permit for kitchen electrical work?
Usually when new circuits are added or a panel is changed. Swapping a like-for-like outlet or switch often doesn't. We confirm with the village before starting.
Does Chicagoland require a licensed electrician for kitchen circuits?
Electrical licensing in Illinois is handled town by town. We check what Chicagoland requires and pull the permit when new circuits are added.
Do you also install kitchen lighting?
Yes. Recessed, pendant and under-cabinet lighting have their own service page, and we often do them with the circuit work.
Which towns do you serve?
Chicago and 49 suburbs, from Naperville and Aurora to Evanston, Schaumburg and Orland Park. Pick your town below for local details and ZIP codes.
Kitchen Electrical Work near you
Pick your town for local details, ZIP codes and nearby projects.
