Aluminum branch wiring
Some homes built in the late 1960s and 1970s used aluminum branch wiring. Connections need devices and connectors rated for aluminum, and we check them when we open the boxes.
Serving Highland Park & nearby Northbrook, Glenview
Kitchen Electrical Work in Highland Park, IL
New circuits, GFCI outlets, island power and panel upgrades for Highland Park kitchens, done by a licensed electrician and inspected when required.
- Serving Highland Park ZIP 60035
- Installed level, sealed and tested before we leave
- Clear price for the install before the visit
Kitchen electrical problems we fix in Highland Park
Whether you're remodeling or just tired of extension cords, the kitchen wiring has to keep up with how you cook. We check the panel, map the circuits, then add outlets, dedicated lines and safety protection for your Highland Park home, with an inspection when the work calls for one.
Switching to induction or adding a wall oven
A double wall oven or induction cooktop needs heavier wire and a larger breaker than an old outlet provides. We size and install both.
Outlets that suddenly stopped working
Dead kitchen outlets are often fed through a GFCI somewhere else that has tripped. We find it, test it and replace it if it won't hold.
Flickering or dimming when appliances start
Flicker in the kitchen is a symptom worth checking. It may be a bad switch, a loose neutral or too much on one circuit.
No GFCI protection at the counter
Outlets near the sink and along the counters should be GFCI protected, which cuts power fast if current leaks through water or a person. We add GFCI receptacles or breakers.
Remodel rough-in and inspection
Open walls are the best time to fix kitchen wiring. We bring circuits up to code, then return to install devices and fixtures after the finishes.
Two-prong outlets and no ground
Ungrounded receptacles can't safely power modern appliances with three-prong plugs. We replace the wiring or add protection as the situation allows.
New appliance needs its own circuit
Before a new appliance arrives, we check its install guide and add the dedicated circuit it calls for.
What the install includes
- Plan and permitWe draw up the wiring plan and file for the village permit when the job requires it.
- Panel workRoom made in the panel for the kitchen circuits.
- Small-appliance circuitsCounter receptacles split across separate circuits.
- Appliance circuitsDedicated lines for the dishwasher, disposal, microwave, refrigerator and range or oven per the maker or code.
- Outlets and boxesOutlets added and placed where the counter is actually used.
- GFCI and AFCI protectionShock and arc-fault protection installed and tested.
- InspectionWe meet the inspector and close out the permit.
Options to choose from
Cable and conduitNew copper circuits installed the way local code calls for.
20-amp counter circuitsHeavier wire and breakers for the outlets that power kettles, toasters and mixers.
AFCI and dual-function breakersBreakers that detect arcing in damaged wiring, often combined with GFCI.
240-volt appliance circuitsHeavy-gauge lines for electric cooking.
GFCI receptacles and breakersRequired at the counters and near water; available as outlets or breakers.
Kitchen Electrical Work before and after — Highland Park homes
Before
Installed
DetailHighland Park kitchen, two-story colonial from the 1990s: kitchen electrical work
This one is a two-story colonial from the 1990s near Port Clinton. Before: white Corian-style solid surface with a yellowed seam and black appliances. The main complaint was a kitchen circuit that kept tripping. After: new GFCI outlets at counter height on a dedicated circuit, cover plates installed. On site this meant panel work, appliance circuits, plus GFCI and AFCI protection.
Before
AfterKitchen Electrical Work in a 1990s two-story colonial, Northbrook
A 1990s two-story colonial near Techny, a typical kitchen for Northbrook. Before: almond laminate with a backsplash lip and almond appliances. The main complaint was decades-old wiring behind the counters. Finished kitchen: new GFCI outlets at counter height on a dedicated circuit, cover plates installed. Work included panel work, outlets and boxes, plus inspection.
Kitchen Electrical Work in Northbrook →
Before
AfterGlenview kitchen, 1980s two-story: kitchen electrical work
The site: a 1980s two-story near The Grove. What we started with: white ceramic tile with dark stained grout lines and white appliances. The reason for the call: too few outlets and breakers that kept tripping. The result: new GFCI outlets at counter height on a dedicated circuit, cover plates installed. On site this meant small-appliance circuits, outlets and boxes, plus GFCI and AFCI protection.
Kitchen Electrical Work in Glenview →
Before
AfterBefore and after: a postwar bi-level in Highland Park
Cabinets in white uppers and dusty blue lowers with matte black pulls, bright white quartz counters, a terracotta-look square tile backsplash, black-and-white checkerboard tile flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Highland Park →
Before
AfterBefore and after: a postwar Cape Cod in Highland Park
The same doors sprayed in pale sage, new polished nickel pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Highland Park →Install day
- Tell us what's going wrong or what you're planningShare your remodel plans or the problem you're seeing.
- Site checkA licensed electrician maps the circuits, checks the panel and confirms what the code requires.
- Written estimateAn itemized estimate listing each circuit, outlet, panel change and permit.
- Wiring and inspectionCircuits installed, devices tested and inspection passed when a permit is required.
Kitchen Electrical Work questions from Highland Park homeowners
How much does kitchen electrical work cost?
It depends on the number of circuits, panel capacity, wall access and permit requirements. We give a written, itemized estimate after the site check.
Do kitchen outlets have to be GFCI?
Yes for the counters and near the sink. It can be a GFCI outlet or a GFCI breaker protecting the whole circuit.
Is my panel big enough for a kitchen remodel?
It depends on the service size and what's already on it. An induction range or second oven is often the deciding factor.
Can you add outlets without tearing open the walls?
Usually, with minimal patching. Plaster walls and some layouts take more work, and we say so up front.
Why does my kitchen breaker keep tripping?
Usually too many appliances on one circuit. A faulty appliance, worn outlet or ground fault can also trip it. We test to find out which.
Do I need a Highland Park-registered contractor for kitchen electrical work?
The City publishes contractor requirements on its Building Division page (new building codes effective March 1, 2026). We take care of that before work starts.
Do you work in my part of Highland Park?
Yes. Our crews work across Highland Park, including Ravinia District, Downtown Highland Park, Port Clinton, St. John's — ZIP 60035 — and nearby Northbrook, Glenview, Buffalo Grove.
Working in Highland Park
- A lot of Highland Park kitchens date from the pre-1940. We know these layouts well and what is worth keeping.
- Most Highland Park homes are single-family. We protect floors and driveways and leave the site clean every day.
- Older paint is treated with lead-safe practices: containment, HEPA cleanup and a clean hand-over.
Ravinia DistrictDowntown Highland ParkPort ClintonSt. John's
ZIP 60035
Kitchen Electrical Work nearby
Other kitchen services in Highland Park
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Kitchen Backsplash InstallationTile backsplashes with clean lines and flush outlets.