Aluminum branch wiring
Aluminum circuits are still found in some houses from that era. We identify them and make every kitchen connection with parts rated for the metal.
Serving Arlington Heights & nearby Mount Prospect, Palatine
Kitchen Electrical Work in Arlington Heights, IL
New circuits, GFCI outlets, island power and panel upgrades for Arlington Heights kitchens, done by a licensed electrician and inspected when required.
- Installers working in Arlington Heights ZIP 60004, 60005
- Hookups by licensed trades where the code calls for it
- Old unit hauled away on request
Kitchen electrical problems we fix in Arlington Heights
A kitchen uses more power than any other room, and older wiring wasn't planned for a microwave, an air fryer and a coffee maker running at once. In Arlington Heights we trace what each circuit feeds, add the ones that are missing, put GFCI protection where it belongs and pull a permit when new circuits go in.
Condo kitchens with limited panel room
In a Arlington Heights condo, running new kitchen circuits can mean surface conduit or routing through cabinets. We check what the building allows first.
Two-prong outlets and no ground
Ungrounded receptacles can't safely power modern appliances with three-prong plugs. We replace the wiring or add protection as the situation allows.
Flickering or dimming when appliances start
Flicker in the kitchen is a symptom worth checking. It may be a bad switch, a loose neutral or too much on one circuit.
Under-cabinet outlets and power for an appliance garage
Outlet strips mounted under the upper cabinets keep the backsplash clean. We wire them to the counter circuits with GFCI protection.
Switching to induction or adding a wall oven
A double wall oven or induction cooktop needs heavier wire and a larger breaker than an old outlet provides. We size and install both.
Too few outlets along the counter
If appliances live where the outlet is instead of where you need them, more receptacles fix that. We add them on the right circuits with GFCI protection.
Outlets that suddenly stopped working
When half the counter loses power, the cause can be a tripped GFCI, a loose connection or a failed outlet. We trace the circuit to the actual fault.
What we hook up and check
- Circuit mapping and panel checkWe identify what each kitchen circuit feeds and how much room the panel has.
- Plan and permitA layout of outlets, circuits and switches, with a permit pulled when new circuits are added.
- Small-appliance circuitsDedicated 20-amp circuits for the counter outlets, as today's code usually calls for.
- Outlets and boxesNew boxes and receptacles along the counters, on the island and under cabinets.
- GFCI and AFCI protectionShock and arc-fault protection installed and tested.
- InspectionWe meet the inspector and close out the permit.
- Patching and cleanupAccess holes closed up and the work area cleaned, with finish painting by arrangement.
Options to choose from
20-amp counter circuitsThe circuits built for countertop appliances.
Pop-up, under-cabinet and USB outletsOutlets that hide in the island top, run under the uppers or include USB charging.
240-volt appliance circuitsHeavy-gauge lines for electric cooking.
GFCI receptacles and breakersRequired at the counters and near water; available as outlets or breakers.
Cable and conduitNew copper circuits installed the way local code calls for.
Kitchens like yours in Arlington Heights: before and after
Before
Installed
DetailBefore and after: a 1980s two-story in Arlington Heights
The site: a 1980s two-story in Arlington Heights. The kitchen as it was: white Corian-style solid surface with a yellowed seam and black appliances. What bothered the owners most: too few outlets and an extension cord to the microwave. Finished kitchen: new GFCI outlets at counter height on a dedicated circuit, cover plates installed. On site this meant plan and permit, small-appliance circuits, plus patching and cleanup.
Before
AfterA Mount Prospect two-story colonial from the 1990s: before and after
This one is a two-story colonial from the 1990s in Mount Prospect. What we started with: white ceramic tile with dark stained grout lines and white appliances. What bothered the owners most: old two-prong outlets along the counter. Finished kitchen: new GFCI outlets at counter height on a dedicated circuit, cover plates installed. The job covered plan and permit, outlets and boxes, plus patching and cleanup.
Kitchen Electrical Work in Mount Prospect →
Before
AfterAn Arlington Heights 1950s ranch: before and after
Finished: cabinets in dark teal with brushed nickel bar pulls, charcoal concrete-look quartz counters, a white 2x8 tile in a vertical stack backsplash, hickory luxury vinyl plank flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Arlington Heights →
Before
AfterBefore and after: a postwar Cape Cod in Arlington Heights
Finished: the same doors sprayed in pale sage, new polished nickel pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Arlington Heights →
Before
AfterBefore and after: a 1950s ranch in Arlington Heights
New five-piece shaker doors in creamy white uppers and navy lowers on the existing boxes, matching face-frame veneer and unlacquered brass knobs and cup pulls.
Cabinet Refacing in Arlington Heights →How the install goes
- Tell us what's going wrong or what you're planningShare your remodel plans or the problem you're seeing.
- Site checkA licensed electrician maps the circuits, checks the panel and confirms what the code requires.
- Written estimateAn itemized estimate listing each circuit, outlet, panel change and permit.
- Wiring and inspectionWe do the work, test every outlet and close out the permit.
Kitchen Electrical Work questions from Arlington Heights homeowners
Do kitchen outlets have to be GFCI?
Yes. It's one of the most common updates we make in older kitchens.
Do I need outlets on my kitchen island?
It depends on the code in force and your plans. We'll tell you what's required and what's sensible.
How many circuits does a kitchen need?
More than most older kitchens have. Counter outlets need their own circuits, and many appliances need individual lines.
Why does my kitchen breaker keep tripping?
We check the load, the devices and the wiring. The fix is often a new small-appliance circuit.
Do you also install kitchen lighting?
Yes. Tell us about the lighting when you book.
Can you do kitchen electrical work in an Arlington Heights condo?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
Arlington Heights contractor registration: do kitchen contractors need it?
The Village of Arlington Heights contractor license number must be listed on permit applications; homeowners doing their own work file a Homeowner as General Contractor form. We take care of that before work starts.
Does Arlington Heights require a licensed electrician for kitchen electrical work?
Electrical permit application must include a copy of the electrical license. New circuits and wiring are done by licensed electricians.
Arlington Heights building permit for kitchen electrical work: where do I apply?
Permits go through Building & Life Safety Department, phone (847) 368-5560. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for kitchen electrical work in Arlington Heights?
It depends on the scope. Arlington Heights's rule in short: Remodel permit applications (shown here via a basement remodel checklist dated 2020) require a building permit application, plans and a contractor proposal; plumbing and electrical permit applications are added if applicable. We handle the permit when one is needed with Building & Life Safety Department.
Do you work in my part of Arlington Heights?
Yes. Our crews work across Arlington Heights — ZIP 60004, 60005 — and nearby Mount Prospect, Palatine, Buffalo Grove.
Working in Arlington Heights
- A lot of Arlington Heights kitchens date from the 1970s. We know these layouts well and what is worth keeping.
- Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.
- We know how Building & Life Safety Department handles kitchen permits and pull them for you.
ZIP 60004ZIP 60005
Kitchen Electrical Work nearby
Other kitchen services in Arlington Heights
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Kitchen Backsplash InstallationTile backsplashes with clean lines and flush outlets.