Aluminum branch wiring
Some homes built in the late 1960s and 1970s used aluminum branch wiring. Connections need devices and connectors rated for aluminum, and we check them when we open the boxes.
Serving Aurora & nearby Batavia, Warrenville
Kitchen Electrical Work in Aurora, IL
New circuits, GFCI outlets, island power and panel upgrades for Aurora kitchens, done by a licensed electrician and inspected when required.
- Serving Aurora ZIP 60506, 60502, 60505, 60504, 60503
- Installed level, sealed and tested before we leave
- Clear price for the install before the visit
Kitchen electrical problems we fix in Aurora
Breakers that trip at breakfast, too few outlets along the counter, a new induction range with nowhere to plug in: these are the calls we get from Aurora kitchens. A licensed electrician finds the cause, explains the fix and does the wiring to today's code.
Too few outlets along the counter
Power strips on the counter are a sign of too few outlets. We install new ones along the backsplash, fed properly from the panel.
Flickering or dimming when appliances start
If the lights pulse every time the fridge compressor starts, we look at what that circuit carries and how it's connected.
Breaker trips when two appliances run
Tripping at the same time every morning is a sign the counter outlets share one line. We separate them so the coffee maker and microwave can run together.
Warm, buzzing or scorched outlets
Buzzing or heat at a kitchen outlet usually comes from a worn receptacle or a loose terminal. We repair it and check the rest of the circuit.
Switching to induction or adding a wall oven
A double wall oven or induction cooktop needs heavier wire and a larger breaker than an old outlet provides. We size and install both.
Under-cabinet outlets and power for an appliance garage
Outlet strips mounted under the upper cabinets keep the backsplash clean. We wire them to the counter circuits with GFCI protection.
Outlets for an island or peninsula
Side-mounted or pop-up outlets keep an island top clear. We wire them on protected circuits and set them so cords stay away from the sink.
Included with the install
- Circuit mapping and panel checkWe identify what each kitchen circuit feeds and how much room the panel has.
- Plan and permitA layout of outlets, circuits and switches, with a permit pulled when new circuits are added.
- Panel workNew breakers, a subpanel or a panel upgrade when capacity is short.
- Appliance circuitsDedicated lines for the dishwasher, disposal, microwave, refrigerator and range or oven per the maker or code.
- Outlets and boxesNew boxes and receptacles along the counters, on the island and under cabinets.
- InspectionWe meet the inspector and close out the permit.
- Patching and cleanupWe patch the openings we make and clean up after.
Models, parts and fittings
GFCI receptacles and breakersProtection that shuts power off in a fraction of a second when current leaks to ground.
240-volt appliance circuitsCircuits for ranges, wall ovens and induction cooktops, sized to the nameplate.
20-amp counter circuitsHeavier wire and breakers for the outlets that power kettles, toasters and mixers.
AFCI and dual-function breakersBreakers that detect arcing in damaged wiring, often combined with GFCI.
Cable and conduitCopper wiring in cable or metal conduit, depending on what your village requires.
Kitchen Electrical Work before and after — Aurora homes
Before
Installed
DetailKitchen Electrical Work in a 1980s two-story, Aurora
This one is a 1980s two-story near Riddle Highlands. The kitchen as it was: white Corian-style solid surface with a yellowed seam and black appliances. The main complaint was too few outlets and an extension cord to the microwave. The result: new GFCI outlets at counter height on a dedicated circuit, cover plates installed. Work included circuit mapping and panel check, plan and permit, plus outlets and boxes.
Before
AfterKitchen Electrical Work in a 1980s two-story, Batavia
A 1980s two-story in Batavia, a typical kitchen for Batavia. The kitchen as it was: white ceramic tile with dark stained grout lines and white appliances. What bothered the owners most: old two-prong outlets along the counter. After: new GFCI outlets at counter height on a dedicated circuit, cover plates installed. Work included circuit mapping and panel check, appliance circuits, plus patching and cleanup.
Kitchen Electrical Work in Batavia →
Before
AfterBefore and after: a 1990s two-story colonial in Aurora
Cabinets in white uppers and deep green lowers with unlacquered brass knobs and cup pulls, warm walnut butcher block counters, a green zellige-look tile backsplash, warm oak luxury vinyl plank flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Aurora →
Before
AfterAurora kitchen, two-story colonial from the 1990s: kitchen cabinet painting
Finished: the same doors sprayed in creamy white uppers and navy lowers, new matte black pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Aurora →
Before
AfterCabinet Refacing in a two-story colonial from the 1990s, Aurora
New five-piece shaker doors in warm white on the existing boxes, matching face-frame veneer and satin brass pulls.
Cabinet Refacing in Aurora →How the install goes
- Tell us what's going wrong or what you're planningDescribe the tripping, dead outlets or new appliances, and send photos of the panel.
- Site checkA licensed electrician maps the circuits, checks the panel and confirms what the code requires.
- Written estimateA clear written price before any work starts.
- Wiring and inspectionCircuits installed, devices tested and inspection passed when a permit is required.
Kitchen Electrical Work questions from Aurora homeowners
Is my panel big enough for a kitchen remodel?
It depends on the service size and what's already on it. An induction range or second oven is often the deciding factor.
Does Aurora require a licensed electrician for kitchen circuits?
Local rules decide who may do the work and when a permit is needed. The wiring on our jobs is done by a licensed electrician and inspected when required.
Can you add outlets without tearing open the walls?
Often yes. We fish wire through the walls and cabinets and make small access holes that are patched afterward.
Why does my kitchen breaker keep tripping?
Overload is the most common cause, especially in older kitchens with one counter circuit. Adding circuits fixes it.
Do you also install kitchen lighting?
We do. Lighting and outlets are frequently planned together in a remodel.
Aurora contractor registration: do kitchen contractors need it?
Contractors must be registered/licensed with the City (application, required testing if applicable, proof of insurance naming the City as additional insured). Homeowners may act as own contractor if owner-occupied 6+ months with a Homeowner Liability Waiver. We take care of that before work starts.
Aurora building permit for kitchen electrical work: where do I apply?
Permits go through Division of Building and Permits, City of Aurora, phone (630) 256-3130. When your scope needs one, we prepare the application and schedule the inspections.
What does Aurora ask for on electrical work?
City tests electrical contractors (ICC Standard Residential/Master Electrician accepted in lieu of testing). Electrical work over $500 requires a licensed Electrical Contractor, even for owner-occupants. New circuits and wiring are done by licensed electricians.
Do I need a permit for kitchen electrical work in Aurora?
It depends on the scope. Aurora's rule in short: Interior remodels, structural changes and interior plumbing always need a permit; electrical/mechanical may. We handle the permit when one is needed with Division of Building and Permits, City of Aurora.
Do you work in my part of Aurora?
Yes. Our crews work across Aurora, including Near Eastside, Tanner, Riddle Highlands, Palace Street — ZIP 60506, 60502, 60505, 60504, 60503 — and nearby Batavia, Warrenville, Naperville.
Working in Aurora
- A lot of Aurora kitchens date from the 1990s. We know these layouts well and what is worth keeping.
- Most Aurora homes are single-family. We protect floors and driveways and leave the site clean every day.
- Live in a historic district? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
Near EastsideTannerRiddle HighlandsPalace StreetWest SideFar East Side
ZIP 60506ZIP 60502ZIP 60505ZIP 60504ZIP 60503
Kitchen Electrical Work nearby
Other kitchen services in Aurora
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Kitchen Backsplash InstallationTile backsplashes with clean lines and flush outlets.