Aluminum branch wiring
If your Glen Ellyn home has aluminum wiring, loose or wrong connections can overheat. We repair them with listed connectors or run new copper to the kitchen.
Serving Glen Ellyn & nearby Wheaton, Lombard
Kitchen Electrical Work in Glen Ellyn, IL
New circuits, GFCI outlets, island power and panel upgrades for Glen Ellyn kitchens, done by a licensed electrician and inspected when required.
- Serving Glen Ellyn ZIP 60137
- Installed level, sealed and tested before we leave
- Clear price for the install before the visit
Kitchen electrical problems we fix in Glen Ellyn
Whether you're remodeling or just tired of extension cords, the kitchen wiring has to keep up with how you cook. We check the panel, map the circuits, then add outlets, dedicated lines and safety protection for your Glen Ellyn home, with an inspection when the work calls for one.
No GFCI protection at the counter
Older kitchens often have plain outlets right next to the sink. We upgrade them to GFCI protection and test each one.
Under-cabinet outlets and power for an appliance garage
An appliance garage or coffee station needs outlets inside the cabinet. We add them on a proper circuit so the toaster can stay plugged in.
New appliance needs its own circuit
Dishwashers, disposals, built-in microwaves and refrigerators often need dedicated circuits per the maker or code. We run them from the panel before install day.
Outlets that suddenly stopped working
When half the counter loses power, the cause can be a tripped GFCI, a loose connection or a failed outlet. We trace the circuit to the actual fault.
Breaker trips when two appliances run
If the breaker drops every time the toaster and kettle run together, too much is sharing one circuit. Today's code usually calls for at least two 20-amp circuits for the counter outlets, and we add what's missing.
Flickering or dimming when appliances start
Lights that dim when the microwave kicks on can mean shared or overloaded circuits or a loose connection. We test and trace the cause.
Switching to induction or adding a wall oven
Going from gas to electric cooking means a large new circuit. We confirm the panel can take it before you buy the appliance.
Included with the install
- Circuit mapping and panel checkEvery breaker serving the kitchen is traced and the panel load is reviewed.
- Plan and permitWe draw up the wiring plan and file for the village permit when the job requires it.
- Small-appliance circuitsDedicated 20-amp circuits for the counter outlets, as today's code usually calls for.
- Appliance circuitsDedicated lines for the dishwasher, disposal, microwave, refrigerator and range or oven per the maker or code.
- Outlets and boxesOutlets added and placed where the counter is actually used.
- GFCI and AFCI protectionShock and arc-fault protection installed and tested.
- InspectionWe meet the inspector and close out the permit.
Models, parts and fittings
Pop-up, under-cabinet and USB outletsWays to add power without cluttering the backsplash.
AFCI and dual-function breakersArc-fault protection that today's code usually asks for on kitchen circuits.
Cable and conduitCopper wiring in cable or metal conduit, depending on what your village requires.
20-amp counter circuitsHeavier wire and breakers for the outlets that power kettles, toasters and mixers.
GFCI receptacles and breakersProtection that shuts power off in a fraction of a second when current leaks to ground.
What the work looks like in Glen Ellyn homes
Before
Installed
DetailKitchen Electrical Work in a 1980s two-story, Glen Ellyn
This one is a 1980s two-story in Glen Ellyn. Before: almond laminate with a backsplash lip and almond appliances. What bothered the owners most: outlets that tripped whenever two appliances ran. After: new GFCI outlets at counter height on a dedicated circuit, cover plates installed. On site this meant circuit mapping and panel check, plan and permit, plus GFCI and AFCI protection.
Before
AfterBefore and after: a two-story colonial from the 1990s in Lombard
The site: a two-story colonial from the 1990s in Lombard. The kitchen as it was: white ceramic tile with dark stained grout lines and white appliances. The reason for the call: old two-prong outlets along the counter. After: new GFCI outlets at counter height on a dedicated circuit, cover plates installed. Work included circuit mapping and panel check, appliance circuits, plus GFCI and AFCI protection.
Kitchen Electrical Work in Lombard →
Before
AfterA Villa Park 1980s two-story: before and after
The site: a 1980s two-story in Villa Park. The kitchen as it was: white Corian-style solid surface with a yellowed seam and black appliances. The main complaint was a kitchen circuit that kept tripping. After: new GFCI outlets at counter height on a dedicated circuit, cover plates installed. The job covered plan and permit, small-appliance circuits, plus appliance circuits.
Kitchen Electrical Work in Villa Park →
Before
AfterBefore and after: a postwar Cape Cod in Glen Ellyn
Finished: cabinets in light butter yellow with polished nickel pulls, black honed granite counters, a gray beveled subway tile backsplash, light oak hardwood flooring and two glass pendants and recessed lights.
Kitchen Remodeling in Glen Ellyn →
Before
AfterGlen Ellyn kitchen, postwar Cape Cod: kitchen cabinet painting
What changed: the same doors sprayed in creamy white uppers and navy lowers, new brushed nickel bar pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Glen Ellyn →Install day
- Tell us what's going wrong or what you're planningDescribe the tripping, dead outlets or new appliances, and send photos of the panel.
- Site checkA licensed electrician maps the circuits, checks the panel and confirms what the code requires.
- Written estimateAn itemized estimate listing each circuit, outlet, panel change and permit.
- Wiring and inspectionCircuits installed, devices tested and inspection passed when a permit is required.
Kitchen Electrical Work questions from Glen Ellyn homeowners
Should I replace old wiring in an older home?
Knob-and-tube, cloth wiring and ungrounded circuits shouldn't power a modern kitchen. We replace the kitchen runs and tell you what we find elsewhere.
Do kitchen outlets have to be GFCI?
Yes for the counters and near the sink. It can be a GFCI outlet or a GFCI breaker protecting the whole circuit.
Can you add outlets without tearing open the walls?
In most cases. Some routes need an opening or two, which we close up when we're done.
How many circuits does a kitchen need?
More than most older kitchens have. Counter outlets need their own circuits, and many appliances need individual lines.
Why does my kitchen breaker keep tripping?
We check the load, the devices and the wiring. The fix is often a new small-appliance circuit.
Glen Ellyn contractor registration: do kitchen contractors need it?
Contractors must register with the Village and meet license and insurance requirements (Village Code 4-1-11); work that does not need a building permit is exempt. We take care of that before work starts.
Do you work in my part of Glen Ellyn?
Yes. Our crews work across Glen Ellyn — ZIP 60137 — and nearby Wheaton, Lombard, Glendale Heights.
Working in Glen Ellyn
- A lot of Glen Ellyn kitchens date from the 1970s. We know these layouts well and what is worth keeping.
- Most Glen Ellyn homes are single-family. We protect floors and driveways and leave the site clean every day.
- Older paint is treated with lead-safe practices: containment, HEPA cleanup and a clean hand-over.
ZIP 60137
Kitchen Electrical Work nearby
Other kitchen services in Glen Ellyn
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Kitchen Backsplash InstallationTile backsplashes with clean lines and flush outlets.