Aluminum branch wiring
Some homes built in the late 1960s and 1970s used aluminum branch wiring. Connections need devices and connectors rated for aluminum, and we check them when we open the boxes.
Serving Mount Prospect & nearby Des Plaines, Arlington Heights
Kitchen Electrical Work in Mount Prospect, IL
New circuits, GFCI outlets, island power and panel upgrades for Mount Prospect kitchens, done by a licensed electrician and inspected when required.
- Installers working in Mount Prospect ZIP 60056, 60005
- Hookups by licensed trades where the code calls for it
- Old unit hauled away on request
Kitchen electrical problems we fix in Mount Prospect
A kitchen uses more power than any other room, and older wiring wasn't planned for a microwave, an air fryer and a coffee maker running at once. In Mount Prospect we trace what each circuit feeds, add the ones that are missing, put GFCI protection where it belongs and pull a permit when new circuits go in.
Condo kitchens with limited panel room
Condo units often have a small panel and wiring in concrete or conduit. We plan new circuits around the building's rules and get management approval where needed.
Under-cabinet outlets and power for an appliance garage
Outlet strips mounted under the upper cabinets keep the backsplash clean. We wire them to the counter circuits with GFCI protection.
No GFCI protection at the counter
Outlets near the sink and along the counters should be GFCI protected, which cuts power fast if current leaks through water or a person. We add GFCI receptacles or breakers.
Breaker trips when two appliances run
Tripping at the same time every morning is a sign the counter outlets share one line. We separate them so the coffee maker and microwave can run together.
Remodel rough-in and inspection
During a remodel, every circuit, box and switch location is set before the drywall closes. We do the rough-in, get the inspection and finish after the cabinets go in.
Outlets that suddenly stopped working
When half the counter loses power, the cause can be a tripped GFCI, a loose connection or a failed outlet. We trace the circuit to the actual fault.
Warm, buzzing or scorched outlets
An outlet that feels hot, crackles or shows brown marks has a loose or failing connection. Turn it off at the breaker and call; we replace the device and check the wire.
Included with the install
- Plan and permitWe draw up the wiring plan and file for the village permit when the job requires it.
- Panel workNew breakers, a subpanel or a panel upgrade when capacity is short.
- Appliance circuitsIndividual circuits for the appliances that need them, including 240-volt cooking circuits.
- Outlets and boxesNew boxes and receptacles along the counters, on the island and under cabinets.
- GFCI and AFCI protectionShock and arc-fault protection installed and tested.
- InspectionRough and final inspections scheduled with the village when a permit is involved.
- Patching and cleanupWe patch the openings we make and clean up after.
What to pick before the install
Pop-up, under-cabinet and USB outletsOutlets that hide in the island top, run under the uppers or include USB charging.
20-amp counter circuitsHeavier wire and breakers for the outlets that power kettles, toasters and mixers.
240-volt appliance circuitsHeavy-gauge lines for electric cooking.
AFCI and dual-function breakersBreakers that detect arcing in damaged wiring, often combined with GFCI.
GFCI receptacles and breakersRequired at the counters and near water; available as outlets or breakers.
Kitchen Electrical Work before and after — Mount Prospect homes
Before
Installed
DetailKitchen Electrical Work in a two-story colonial from the 1990s, Mount Prospect
The site: a two-story colonial from the 1990s in Mount Prospect. What we started with: white ceramic tile with dark stained grout lines and white appliances. What bothered the owners most: old two-prong outlets along the counter. After: new GFCI outlets at counter height on a dedicated circuit, cover plates installed. The job covered plan and permit, appliance circuits, plus inspection.
Before
AfterArlington Heights kitchen, 1980s two-story: kitchen electrical work
A 1980s two-story in Arlington Heights, a typical kitchen for Arlington Heights. What we started with: white Corian-style solid surface with a yellowed seam and black appliances. The main complaint was a kitchen circuit that kept tripping. Finished kitchen: new GFCI outlets at counter height on a dedicated circuit, cover plates installed. Work included panel work, outlets and boxes, plus GFCI and AFCI protection.
Kitchen Electrical Work in Arlington Heights →
Before
AfterAn Elk Grove Village 1980s two-story: before and after
The site: a 1980s two-story in Elk Grove Village. Before: almond laminate with a backsplash lip and almond appliances. What bothered the owners most: decades-old wiring behind the counters. After: new GFCI outlets at counter height on a dedicated circuit, cover plates installed. Work included plan and permit, outlets and boxes, plus inspection.
Kitchen Electrical Work in Elk Grove Village →
Before
AfterBefore and after: a postwar Cape Cod in Mount Prospect
Finished: cabinets in white uppers and dusty blue lowers with matte black pulls, bright white quartz counters, a terracotta-look square tile backsplash, black-and-white checkerboard tile flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Mount Prospect →
Before
AfterMount Prospect kitchen, postwar Cape Cod: kitchen cabinet painting
Finished: the same doors sprayed in pale sage, new polished nickel pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Mount Prospect →How the install goes
- Tell us what's going wrong or what you're planningShare your remodel plans or the problem you're seeing.
- Site checkA licensed electrician maps the circuits, checks the panel and confirms what the code requires.
- Written estimateAn itemized estimate listing each circuit, outlet, panel change and permit.
- Wiring and inspectionCircuits installed, devices tested and inspection passed when a permit is required.
Kitchen Electrical Work questions from Mount Prospect homeowners
Do I need outlets on my kitchen island?
Most owners want them for small appliances. We place side or pop-up outlets on a protected circuit.
How much does kitchen electrical work cost?
Circuits, outlets, panel work and wall access drive the price. We put it in writing before we start.
Do you also install kitchen lighting?
Yes. Recessed, pendant and under-cabinet lighting have their own service page, and we often do them with the circuit work.
How many circuits does a kitchen need?
Today's code usually calls for at least two 20-amp circuits for counter outlets, plus dedicated circuits for appliances like the dishwasher, disposal, microwave and range as the maker or code requires.
Is my panel big enough for a kitchen remodel?
It depends on the service size and what's already on it. An induction range or second oven is often the deciding factor.
Can you do kitchen electrical work in a Mount Prospect condo?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
What does Mount Prospect ask for on electrical work?
Electrical contractors need the Village contractor license and must submit their state license/registration. A licensed electrician is required in multi-family buildings (condos, townhomes, 3-flats). New circuits and wiring are done by licensed electricians.
Do I need a Mount Prospect-registered contractor for kitchen electrical work?
A Contractor's License is required for general contractors (and listed trades); $200, valid one year, applied for through the online portal. We take care of that before work starts.
Mount Prospect building permit for kitchen electrical work: where do I apply?
Permits go through Community Development Department - Building & Inspection Services, phone (847) 870-5675. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for kitchen electrical work in Mount Prospect?
It depends on the scope. Mount Prospect's rule in short: Kitchen remodels need a permit and a code review (about 10 business days). We handle the permit when one is needed with Community Development Department - Building & Inspection Services.
Do you work in my part of Mount Prospect?
Yes. Our crews work across Mount Prospect — ZIP 60056, 60005 — and nearby Des Plaines, Arlington Heights, Elk Grove Village.
Working in Mount Prospect
- A lot of Mount Prospect kitchens date from the 1960s. We know these layouts well and what is worth keeping.
- Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.
- We know how Community Development Department - Building & Inspection Services handles kitchen permits and pull them for you.
ZIP 60056ZIP 60005
Kitchen Electrical Work nearby
Other kitchen services in Mount Prospect
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Kitchen Backsplash InstallationTile backsplashes with clean lines and flush outlets.