Aluminum branch wiring
Some homes built in the late 1960s and 1970s used aluminum branch wiring. Connections need devices and connectors rated for aluminum, and we check them when we open the boxes.
Serving Bartlett & nearby Hanover Park, Carol Stream
Kitchen Electrical Work in Bartlett, IL
New circuits, GFCI outlets, island power and panel upgrades for Bartlett kitchens, done by a licensed electrician and inspected when required.
- Installers working in Bartlett ZIP 60103, 60120
- Hookups by licensed trades where the code calls for it
- Old unit hauled away on request
Kitchen electrical problems we fix in Bartlett
Breakers that trip at breakfast, too few outlets along the counter, a new induction range with nowhere to plug in: these are the calls we get from Bartlett kitchens. A licensed electrician finds the cause, explains the fix and does the wiring to today's code.
Switching to induction or adding a wall oven
Induction ranges, cooktops and electric wall ovens run on 240-volt circuits sized to their nameplate. We check panel capacity and run the circuit.
New appliance needs its own circuit
Before a new appliance arrives, we check its install guide and add the dedicated circuit it calls for.
Remodel rough-in and inspection
During a remodel, every circuit, box and switch location is set before the drywall closes. We do the rough-in, get the inspection and finish after the cabinets go in.
Too few outlets along the counter
Older kitchens may have one or two receptacles for a whole run of counter. Today's code usually spaces them so no stretch of counter is far from an outlet, and we add boxes to match.
Two-prong outlets and no ground
Two-slot outlets mean the circuit has no ground wire. We run new grounded circuits or, where code allows, protect the old ones with GFCI and label them.
Outlets that suddenly stopped working
When half the counter loses power, the cause can be a tripped GFCI, a loose connection or a failed outlet. We trace the circuit to the actual fault.
Warm, buzzing or scorched outlets
Buzzing or heat at a kitchen outlet usually comes from a worn receptacle or a loose terminal. We repair it and check the rest of the circuit.
Included with the install
- Circuit mapping and panel checkWe identify what each kitchen circuit feeds and how much room the panel has.
- Plan and permitWe draw up the wiring plan and file for the village permit when the job requires it.
- Small-appliance circuitsCounter receptacles split across separate circuits.
- Appliance circuitsIndividual circuits for the appliances that need them, including 240-volt cooking circuits.
- Outlets and boxesNew boxes and receptacles along the counters, on the island and under cabinets.
- GFCI and AFCI protectionGFCI on counter and sink-area outlets, AFCI where today's code usually requires it.
- Patching and cleanupAccess holes closed up and the work area cleaned, with finish painting by arrangement.
What to pick before the install
AFCI and dual-function breakersArc-fault protection that today's code usually asks for on kitchen circuits.
20-amp counter circuitsThe circuits built for countertop appliances.
Pop-up, under-cabinet and USB outletsWays to add power without cluttering the backsplash.
240-volt appliance circuitsHeavy-gauge lines for electric cooking.
Cable and conduitNew copper circuits installed the way local code calls for.
Kitchen Electrical Work before and after — Bartlett homes
Before
Installed
DetailA Bartlett 1990s two-story colonial: before and after
The site: a 1990s two-story colonial in Bartlett. What we started with: white Corian-style solid surface with a yellowed seam and black appliances. What bothered the owners most: too few outlets and an extension cord to the microwave. Finished kitchen: new GFCI outlets at counter height on a dedicated circuit, cover plates installed. Work included small-appliance circuits, appliance circuits, plus GFCI and AFCI protection.
Before
AfterKitchen Electrical Work in a two-story colonial from the 1990s, Carol Stream
This one is a two-story colonial from the 1990s in Carol Stream. What we started with: almond laminate with a backsplash lip and almond appliances. What bothered the owners most: outlets that tripped whenever two appliances ran. Finished kitchen: new GFCI outlets at counter height on a dedicated circuit, cover plates installed. The job covered small-appliance circuits, outlets and boxes, plus patching and cleanup.
Kitchen Electrical Work in Carol Stream →
Before
AfterBartlett kitchen, two-story colonial from the 1990s: kitchen remodeling
Finished: cabinets in warm taupe with satin brass pulls, warm walnut butcher block counters, a gray beveled subway tile backsplash, light beige 18x18 porcelain tile flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Bartlett →
Before
AfterA Bartlett two-story colonial from the 1990s: before and after
The same doors sprayed in creamy white uppers and navy lowers, new satin brass pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Bartlett →
Before
AfterBartlett kitchen, 1980s two-story: cabinet refacing
New five-piece shaker doors in sage green on the existing boxes, matching face-frame veneer and satin brass pulls.
Cabinet Refacing in Bartlett →Install day
- Tell us what's going wrong or what you're planningDescribe the tripping, dead outlets or new appliances, and send photos of the panel.
- Site checkWe look at the wiring, panel capacity and outlet layout in person.
- Written estimateAn itemized estimate listing each circuit, outlet, panel change and permit.
- Wiring and inspectionCircuits installed, devices tested and inspection passed when a permit is required.
Kitchen Electrical Work questions from Bartlett homeowners
Why does my kitchen breaker keep tripping?
Overload is the most common cause, especially in older kitchens with one counter circuit. Adding circuits fixes it.
Can you add outlets without tearing open the walls?
Usually, with minimal patching. Plaster walls and some layouts take more work, and we say so up front.
Do kitchen outlets have to be GFCI?
Yes for the counters and near the sink. It can be a GFCI outlet or a GFCI breaker protecting the whole circuit.
Do I need a permit for kitchen electrical work?
Usually when new circuits are added or a panel is changed. Swapping a like-for-like outlet or switch often doesn't. We confirm with the village before starting.
How many circuits does a kitchen need?
Today's code usually calls for at least two 20-amp circuits for counter outlets, plus dedicated circuits for appliances like the dishwasher, disposal, microwave and range as the maker or code requires.
Does Bartlett require a licensed electrician for kitchen electrical work?
Electrical work must be performed by a contractor registered with the Village as a licensed electrical contractor (stated in solar guide). New circuits and wiring are done by licensed electricians.
What is the Bartlett building department phone number?
Permits go through Building Division (Planning & Development Services), phone 630-540-5920. When your scope needs one, we prepare the application and schedule the inspections.
Bartlett contractor registration: do kitchen contractors need it?
All contractors must be licensed by the Village of Bartlett (per trade); licensing questions via Main Office 630-837-0800. We take care of that before work starts.
Do I need a permit for kitchen electrical work in Bartlett?
It depends on the scope. Bartlett's rule in short: Building permits are required for all construction and home improvement projects, whether done by homeowner or contractor; Remodel is a listed permit type. We handle the permit when one is needed with Building Division (Planning & Development Services).
Do you work in my part of Bartlett?
Yes. Our crews work across Bartlett — ZIP 60103, 60120 — and nearby Hanover Park, Carol Stream, Bloomingdale.
Working in Bartlett
- A lot of Bartlett kitchens date from the 1990s. We know these layouts well and what is worth keeping.
- Most Bartlett homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Building Division (Planning & Development Services) handles kitchen permits and pull them for you.
ZIP 60103ZIP 60120
Kitchen Electrical Work nearby
Other kitchen services in Bartlett
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Kitchen Backsplash InstallationTile backsplashes with clean lines and flush outlets.