Dated peninsula with a half wall
Upper cabinets hung over a 2000s peninsula block the room. We take them down, reroute any wiring and rebuild the peninsula with an overhang.
Serving Glenview & nearby Northbrook, Park Ridge
Kitchen Island & Peninsula Installation in Glenview, IL
We add, enlarge or replace kitchen islands and peninsulas in Glenview, with seating, power and plumbing planned around real clearances.
- Kitchen remodels across Glenview ZIP 60025, 60026, 60062
- One project manager from drawings to final walk-through
- Permits and inspections handled for you
Island and peninsula problems we solve in Glenview
Most Glenview homeowners want the same three things from an island: more counter space, a place to sit and extra storage. We plan the size around the room, run the electrical the code usually calls for, and suggest a peninsula when an island would crowd the kitchen.
No place to sit in the kitchen
If everyone stands around while you cook, a seating side on an island or peninsula gives them a place without blocking the work zone.
Want a sink in the island
Facing the family while washing up is a common wish. We plan the drain, vent and supply lines and add a dishwasher next to the island sink.
Want the cooktop in the island
A cooktop in the island needs ventilation from a ceiling hood or a downdraft unit, plus a gas line or a heavy circuit. We plan all of it before building.
Aisles too tight around the island
Squeezing past the island every time someone opens the fridge means it's too big for the room. A narrower island or a peninsula frees the aisle.
Nowhere to prep
When every counter is taken by appliances, an island gives you a clear stretch for chopping, baking and serving.
Island that wobbles or shifts
Wobbly islands crack countertops and loosen cabinets. Ours are screwed to blocking on the floor and leveled first.
Island too small to be useful
A narrow builder island or a rolling cart holds a fruit bowl and little else. We replace it with a larger island sized to the room's clearances.
What's included
- Floor prepWe repair the floor under the footprint and install cleats or blocking to fasten the base.
- Electrical rough-inPower routed through the floor or from an adjacent wall, with boxes placed for outlets and lights.
- Plumbing and ventingWater lines and a properly vented drain when the island gets a sink.
- Panels and seating sideFinished end and back panels, with knee space and furniture details where you want them.
- Overhang supportHidden or visible supports sized to the overhang and the countertop material.
- CountertopTop templated on the installed base and set with sink and cooktop cut-outs.
- Outlets, pendants and hookupsFinal electrical and plumbing connections and a test of every outlet and light.
Choices you'll make
Island cabinetsStock, semi-custom or custom bases in a matching or contrasting finish.
Quartz and granite topsQuartz for low upkeep, granite for heat resistance; both need support at seating overhangs.
Legs, corbels and bracketsFurniture legs or corbels support overhangs and give the island a built-in look.
Butcher blockA wood island top is easy to work on and can be sanded and refinished later.
Counter or bar height seatingCounter height keeps one continuous surface; a raised bar hides prep clutter from the room.
Kitchen Island & Peninsula Installation before and after — Glenview homes
Before
In progress
AfterA Glenview 1950s ranch: before and after
The site: a 1950s ranch near The Park. What we started with: dark walnut-stained flush-panel cabinets with brass pulls and speckled laminate. The reason for the call: a kitchen with no room to prep or gather. The result: a new island in dusty blue with a creamy quartzite-look quartz top and seating. The job covered plumbing and venting, overhang support, plus outlets, pendants and hookups.
Before
AfterBefore and after: a postwar bi-level in Park Ridge
The site: a postwar bi-level in Park Ridge. The kitchen as it was: 1970s dark pecan-stained cabinets and light beige laminate. The main complaint was a kitchen with no room to prep or gather. Finished kitchen: a new island in dusty blue with a charcoal concrete-look quartz top and seating. On site this meant electrical rough-in, plumbing and venting, plus outlets, pendants and hookups.
Kitchen Island & Peninsula Installation in Park Ridge →
Before
AfterPantry Design & Installation in a postwar bi-level, Glenview
Finished: the closet next to the kitchen rebuilt as a pantry with solid wood shelves, pull-out baskets on the bottom and a light.
Pantry Design & Installation in Glenview →
Before
AfterA Glenview 1960s ranch: before and after
A built-in banquette bench with storage drawers and cushions under the window, with a round pedestal table.
Built-In Breakfast Nook & Banquette in Glenview →
Before
AfterA Glenview postwar Cape Cod: before and after
Cabinets in white uppers and dusty blue lowers with matte black pulls, bright white quartz counters, a terracotta-look square tile backsplash, black-and-white checkerboard tile flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Glenview →The project, step by step
- Measure and mock-upWe measure the kitchen and tape the island outline on the floor so you can test the walkways.
- Plan and written estimateIsland size, cabinets, top, seating and trades in a drawn plan with an itemized quote.
- Rough-in and permitsPermits filed when wiring or plumbing is added; rough-ins done and inspected before the base goes in.
- Build and countertopCabinets fastened down, sides finished, then the countertop is measured and set.
- Hookups and walk-throughFinal connections, cleanup and a look at the finished island together.
Kitchen Island & Peninsula Installation questions from Glenview homeowners
Can you add a sink to a kitchen island?
Usually. We check how the drain can reach the island and how it will be vented before designing around a sink.
Should the island be fixed or freestanding?
Most islands we install are fixed so they can carry stone and power safely; freestanding units are lighter and simpler.
Can you put a cooktop or range in the island?
It's possible in most kitchens. Ventilation is the main question, followed by getting gas or power to the island.
Does a kitchen island need an electrical outlet?
In many jurisdictions, yes — code usually requires at least one outlet on an island counter. We confirm the local rules and wire it with GFCI protection.
How much overhang do I need for seating?
Plan for about a foot or a bit more of knee space and about two feet of length per seat. We add hidden supports under stone.
What is the Glenview building department phone number?
Permits go through Community Development, Inspectional Services Division (Development Center), phone (847) 904-4330. When your scope needs one, we prepare the application and schedule the inspections.
What does Glenview ask for on electrical work?
Electricians register with the Village by submitting a copy of their license; no fee or bond listed. New circuits and wiring are done by licensed electricians.
Do I need a Glenview-registered contractor for island project?
General and demolition contractors register with the Village: $50 fee, $25,000 bond, certificate of insurance and workers comp proof. Unlisted contractor types need no registration. We take care of that before work starts.
Does Glenview require a licensed plumber for island project?
Plumbers register by submitting a copy of their 055 State license and a Letter of Intent; no fee or bond. Our plumbing connections are made by licensed plumbers.
Do I need a permit for island project in Glenview?
It depends on the scope. Glenview's rule in short: Permit required for remodeling/altering a structure, changing the number or location of plumbing fixtures or piping, and new electrical work. We handle the permit when one is needed with Community Development, Inspectional Services Division (Development Center).
Do you work in my part of Glenview?
Yes. Our crews work across Glenview, including The Park, The Glen, The Grove — ZIP 60025, 60026, 60062 — and nearby Northbrook, Park Ridge, Des Plaines.
Working in Glenview
- A lot of Glenview kitchens date from the 2000s. We know these layouts well and what is worth keeping.
- Most Glenview homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Community Development, Inspectional Services Division (Development Center) handles kitchen permits and pull them for you.
The ParkThe GlenThe Grove
ZIP 60025ZIP 60026ZIP 60062
Kitchen Island & Peninsula Installation nearby
More for Glenview homeowners
- All kitchen services in GlenviewRemodels, cabinets, counters, plumbing, appliances and repairs
- Kitchen Island & Peninsula Installation across ChicagolandEvery town we cover for this service
-
Planning and designIsland Kitchen Layout Design: Kitchen Island vs Peninsula and Ideas for Small KitchensAn island kitchen layout works when you can keep about 42 inches of walkway on every side, or about 48 inches with two cooks. In narrower rooms a…3 min read
-
Planning and designKitchen Island Dimensions: Island Kitchen Layout Dimensions, Seating and ClearancesMost kitchen islands are about 36 inches (91 cm) high, 24 to 42 inches (61 to 107 cm) deep and 4 to 10 feet (1.2 to 3 m) long. Plan about 42 inches…3 min read
Other kitchen services in Glenview
Pull-Out Shelves & Cabinet OrganizersRoll-out shelves and organizers built to fit your existing cabinets.
Pantry Design & InstallationPantry cabinets, closet conversions and walk-in shelving, built to fit.
Built-In Breakfast Nook & BanquetteBuilt-in bench seating with storage for corners, bays and nooks.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.