Serving Glenview & nearby Northbrook, Park Ridge

Pull-Out Shelves & Cabinet Organizers in Glenview, IL

We fit roll-out shelves, trash pull-outs and corner organizers into the cabinets already in your Glenview kitchen.

  • Installers working in Glenview ZIP 60025, 60026, 60062
  • Hookups by licensed trades where the code calls for it
  • Old unit hauled away on request

Prefer a callback?

Leave your number and a Glenview pull-out shelf installer will call you.

Cabinet problems pull-outs fix in Glenview

Most base cabinets are deep enough to lose a stockpot in. In Glenview we measure each opening, build roll-out shelves to fit between the hinges and install them on full-extension slides, so everything in the cabinet comes out to you.

Original 2000s cabinets with fixed shelves

Cabinets from the 2000s usually have one fixed shelf halfway up. Removing it and adding two roll-outs makes the space usable.

Lids sliding everywhere

Loose lids are the messiest part of a pot cabinet. We add dividers or a slim lid pull-out to hold them upright.

Doors and hinges in the way

Off-the-shelf organizers often hit the hinges. Ours are built to the actual clear opening, measured on site.

Trash can in the walkway

We convert a base cabinet near the sink or prep zone into a trash and recycling pull-out.

Blind corner cabinet

When the deepest part of the corner is out of reach, corner pull-out hardware swings the contents out through the door.

Baking sheets and cutting boards jammed in

Trays and boards stored flat end up under everything. Vertical dividers let you slide one out without moving the rest.

Spices crowding the counter

Spice racks on the counter waste prep space. A slim base pull-out or drawer insert keeps jars labeled side up.

Pantry cabinet with deep fixed shelves

Tall pantry cabinets with fixed shelves bury cans at the back. Roll-out drawers inside the doors make every row visible.

Included with the install

  • Cabinet-by-cabinet reviewWe go through each cabinet with you and decide what should live where.
  • Measuring the clear openingsWidth between hinges, depth to the back and height to the next shelf, for every cabinet.
  • Removing fixed shelvesOld fixed shelves and loose racks come out where roll-outs will go.
  • Mounting slidesFull-extension slides are mounted on spacers or rear brackets so the shelf runs level.
  • Installing roll-out shelvesSliding shelves installed and spaced around what you store.
  • Trash, corner and under-sink unitsTrash pull-outs, corner swing-outs and sink-base organizers installed and adjusted.
  • Adjustment and walkthroughEvery slide is adjusted to run smoothly and clear the doors, then we show you how they work.

Options to choose from

Full-extension slidesThe shelf comes all the way out so nothing hides in the back.
Wire and chrome pull-outsCoated-wire baskets for cleaning supplies and spots that need airflow.
Custom-made vs. kit organizersCustom units fit the exact opening; kits come in set sizes that may leave gaps or hit hinges.
Plywood or melamine roll-outsA practical choice for pantry shelves and lighter loads.
Specialty hardwareCorner swing-outs, lazy Susans, double-bin trash pull-outs and pull-down shelves.

What the work looks like in Glenview homes

Pull-Out Shelves & Cabinet Organizers in a 1980s-1990s two-story colonial / tract house — beforeBefore
Pull-Out Shelves & Cabinet Organizers in a 1980s-1990s two-story colonial / tract house — installedInstalled
Pull-Out Shelves & Cabinet Organizers in a 1980s-1990s two-story colonial / tract house — detailDetail

Glenview kitchen, 1980s two-story: pull-out shelves & cabinet organizers

This one is a 1980s two-story near The Park. Before: white thermofoil cabinets peeling at the edges, oak trim. The reason for the call: kneeling on the floor to dig out a pan. After: two wooden roll-out shelves in the deep base cabinet, pots and pans in neat rows that slide out to the front. Work included cabinet-by-cabinet review, removing fixed shelves, plus adjustment and walkthrough.

Pull-Out Shelves & Cabinet Organizers project in Northbrook, beforeBefore
Pull-Out Shelves & Cabinet Organizers project in Northbrook, afterAfter

A Northbrook two-story colonial from the 1990s: before and after

The site: a two-story colonial from the 1990s in Northbrook. What we started with: honey-oak cathedral raised-panel cabinets with worn finish near the handles, brass knobs. What bothered the owners most: deep base cabinets where pots got lost at the back. After: two wooden roll-out shelves in the deep base cabinet, pots and pans in neat rows that slide out to the front. On site this meant measuring the clear openings, removing fixed shelves, plus installing roll-out shelves.

Pull-Out Shelves & Cabinet Organizers in Northbrook →
Pull-Out Shelves & Cabinet Organizers project in Park Ridge, beforeBefore
Pull-Out Shelves & Cabinet Organizers project in Park Ridge, afterAfter

Pull-Out Shelves & Cabinet Organizers in a two-story colonial from the 1990s, Park Ridge

The site: a two-story colonial from the 1990s in Park Ridge. Before: golden-oak cabinets with oak soffits above. What bothered the owners most: solid cabinets with fixed shelves nobody could reach into. The result: two wooden roll-out shelves in the deep base cabinet, pots and pans in neat rows that slide out to the front. On site this meant mounting slides, installing roll-out shelves, plus trash, corner and under-sink units.

Pull-Out Shelves & Cabinet Organizers in Park Ridge →
Pantry Design & Installation project near Glenview, beforeBefore
Pantry Design & Installation project near Glenview, afterAfter

Pantry Design & Installation in a 1950s ranch, Glenview

Finished: the closet next to the kitchen rebuilt as a pantry with solid wood shelves, pull-out baskets on the bottom and a light.

Pantry Design & Installation in Glenview →
Built-In Breakfast Nook & Banquette project near Glenview, beforeBefore
Built-In Breakfast Nook & Banquette project near Glenview, afterAfter

Glenview kitchen, 1960s ranch: built-in breakfast nook & banquette

Finished: a built-in banquette bench with storage drawers and cushions under the window, with a round pedestal table.

Built-In Breakfast Nook & Banquette in Glenview →

Install day

  1. Send photos of the cabinetsOpen the doors and take a few photos so we can see the cabinet type and what's inside.
  2. Measure and planA visit to measure and decide shelf heights, materials and specialty units.
  3. Written estimateA written quote listing every pull-out, so you can choose all or some.
  4. Install dayOnce the units are made, installation is often finished in a single visit.

Pull-Out Shelves & Cabinet Organizers questions from Glenview homeowners

Can pull-out shelves be added to existing cabinets?
That's what most of our work is. We fit sliding shelves into cabinets that were built with fixed shelves.
Do pull-out shelves work for deep cabinets?
Deep cabinets benefit the most. Full-extension slides bring the back row all the way out.
How long does installation take?
Measuring and building take the most time; the install itself is short.
How much do pull-out shelves cost to install?
Wood vs. melamine, soft-close or standard slides and specialty units all change the price. We quote per cabinet after the visit.
Do roll-outs lose cabinet space?
The shelf is slightly narrower than the opening. In practice you store more, because the back of the cabinet becomes usable.
Glenview contractor registration: do kitchen contractors need it?
General and demolition contractors register with the Village: $50 fee, $25,000 bond, certificate of insurance and workers comp proof. Unlisted contractor types need no registration. We take care of that before work starts.
Do I need a permit for pull-out shelf installation in Glenview?
It depends on the scope. Glenview's rule in short: Permit required for remodeling/altering a structure, changing the number or location of plumbing fixtures or piping, and new electrical work. We handle the permit when one is needed with Community Development, Inspectional Services Division (Development Center).
Do you work in my part of Glenview?
Yes. Our crews work across Glenview, including The Park, The Glen, The Grove — ZIP 60025, 60026, 60062 — and nearby Northbrook, Park Ridge, Des Plaines.

Working in Glenview

  • A lot of Glenview kitchens date from the 2000s. We know these layouts well and what is worth keeping.
  • Most Glenview homes are single-family. We protect floors and driveways and leave the site clean every day.
  • We know how Community Development, Inspectional Services Division (Development Center) handles kitchen permits and pull them for you.

The ParkThe GlenThe Grove

ZIP 60025ZIP 60026ZIP 60062

Pull-Out Shelves & Cabinet Organizers nearby

Planning a kitchen project in Glenview?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback