Serving Glenview & nearby Northbrook, Park Ridge

Pantry Design & Installation in Glenview, IL

We design and build kitchen pantries in Glenview: tall pantry cabinets, reach-in closet conversions and walk-in pantry shelving.

  • Kitchen remodels across Glenview ZIP 60025, 60026, 60062
  • One project manager from drawings to final walk-through
  • Permits and inspections handled for you

Prefer a callback?

Leave your number and a Glenview pantry installer will call you.

Pantry problems we fix in Glenview

Wire racks, shelves too deep to see into and no light: those are the usual pantry complaints we hear in Glenview. We replace them with shelving built into the framing, pull-out drawers at the bottom and lighting you can switch on from the door.

Dark pantry closet

Hunting for a can with a phone flashlight means the pantry needs a light. We add a fixture or LED strip, switched at the door or by a door sensor.

Walk-in pantry that wastes space

If the walk-in feels full but holds little, the shelving layout needs rethinking.

Wanting a walk-in where there isn't one

A walk-in pantry needs enough width for shelves on both sides plus room to stand. Sometimes that means moving a wall, and then a permit is usually involved.

Wire shelves bending under the weight

Jars tipping through the wires and shelves sloping toward the front are signs the wire shelving has had enough.

Bulk buys with nowhere to go

Paper towels and big packs of water need a different shelf spacing than spices. We set the shelving around both.

Pantry doors that get in the way

If the pantry door is always in the way, a different door type often fixes it without moving the opening.

No pantry at all

Kitchens built without a pantry can usually gain one, either as a full-height cabinet or by converting a nearby closet.

Closet that could be a pantry

If there's a closet off the kitchen or hall, it may hold more food than a new cabinet, once the shelving is rebuilt.

What's included

  • Pantry inventoryA walk through your food, appliances and bulk items to size the pantry.
  • Choosing the pantry typeWe decide together between a pantry cabinet, a closet conversion and a walk-in.
  • Removing old shelvingWire racks and old shelves removed and the walls patched and painted.
  • Framing changes when neededIf the pantry needs a new wall or a wider opening, we frame it and handle the permit.
  • Shelving and drawersSolid shelves on cleats or standards, pull-out drawers and baskets installed.
  • Pantry cabinetsFull-height pantry units installed and trimmed to the existing cabinets.
  • Door racks and finishingRacks on the door, trim work and a walkthrough when it's done.

Finishes and options

Wood and melamine shelvingSolid shelves that stay flat under cans and don't let small items tip.
Reach-in pantryA shallow closet pantry where everything is in reach without stepping in.
Pantry doorsThe door type depends on clearance: swing, sliding, pocket or bifold.
Walk-in pantryA small room lined with shelving, sometimes with a counter or appliance zone.
Pantry cabinetsFull-height cabinets with roll-outs or doors with racks, fitted to a kitchen wall.

Pantry Design & Installation before and after — Glenview homes

Pantry Design & Installation in a postwar ranch / cape cod / bi-level — beforeBefore
Pantry Design & Installation in a postwar ranch / cape cod / bi-level — afterAfter

A Glenview 1960s ranch: before and after

A 1960s ranch in Glenview, a typical kitchen for Glenview. The reason for the call: groceries that had nowhere to go but the counter. The result: the closet next to the kitchen rebuilt as a pantry with solid wood shelves, pull-out baskets on the bottom and a light. The job covered removing old shelving, framing changes when needed, plus pantry cabinets.

Pantry Design & Installation project in Northbrook, beforeBefore
Pantry Design & Installation project in Northbrook, afterAfter

Pantry Design & Installation in a postwar bi-level, Northbrook

The site: a postwar bi-level near Downtown Northbrook. What bothered the owners most: groceries that had nowhere to go but the counter. Finished kitchen: the closet next to the kitchen rebuilt as a pantry with solid wood shelves, pull-out baskets on the bottom and a light. Work included pantry inventory, choosing the pantry type, plus pantry cabinets.

Pantry Design & Installation in Northbrook →
Pantry Design & Installation project in Des Plaines, beforeBefore
Pantry Design & Installation project in Des Plaines, afterAfter

Before and after: a 1960s ranch in Des Plaines

This one is a 1960s ranch in Des Plaines. What bothered the owners most: groceries that had nowhere to go but the counter. After: the closet next to the kitchen rebuilt as a pantry with solid wood shelves, pull-out baskets on the bottom and a light. On site this meant pantry inventory, shelving and drawers, plus door racks and finishing.

Pantry Design & Installation in Des Plaines →
Built-In Breakfast Nook & Banquette project near Glenview, beforeBefore
Built-In Breakfast Nook & Banquette project near Glenview, afterAfter

A Glenview postwar Cape Cod: before and after

A built-in banquette bench with storage drawers and cushions under the window, with a round pedestal table.

Built-In Breakfast Nook & Banquette in Glenview →
Kitchen Island & Peninsula Installation project near Glenview, beforeBefore
Kitchen Island & Peninsula Installation project near Glenview, afterAfter

Kitchen Island & Peninsula Installation in a postwar bi-level, Glenview

Finished: a new island in dusty blue with a creamy quartzite-look quartz top and seating.

Kitchen Island & Peninsula Installation in Glenview →

From first visit to final walk-through

  1. Show us the spaceSend photos of the closet, wall or room you're thinking about, plus what you need to store.
  2. Measure and designWe measure, check walls and wiring, and draw a shelf layout with depths and heights.
  3. Written estimateA written quote that lists each part of the pantry and what is included.
  4. Build and installWe build, install and finish the pantry, then walk you through it.

Pantry Design & Installation questions from Glenview homeowners

Can a closet become a pantry?
Usually yes. We rebuild the inside with shelving, add a light and swap the door if it gets in the way.
Can you match a pantry cabinet to my kitchen?
We aim to match the existing cabinets; when the line is discontinued, a deliberate contrast is usually the better choice.
Do I need a permit for a new pantry?
Only if walls or wiring change. A cabinet or closet conversion generally doesn't need one.
Should I choose a walk-in or a reach-in pantry?
A walk-in needs room for shelves on both sides plus a path to stand in; a reach-in fits where that space isn't available and keeps everything within arm's reach.
How deep should pantry shelves be?
Most food fits on moderate-depth shelves; we save the deep ones for the bottom where bigger items go.
Does pantry project need a Glenview building permit, and who files it?
Permits go through Community Development, Inspectional Services Division (Development Center), phone (847) 904-4330. When your scope needs one, we prepare the application and schedule the inspections.
Glenview contractor registration: do kitchen contractors need it?
General and demolition contractors register with the Village: $50 fee, $25,000 bond, certificate of insurance and workers comp proof. Unlisted contractor types need no registration. We take care of that before work starts.
Do I need a permit for pantry project in Glenview?
It depends on the scope. Glenview's rule in short: Permit required for remodeling/altering a structure, changing the number or location of plumbing fixtures or piping, and new electrical work. We handle the permit when one is needed with Community Development, Inspectional Services Division (Development Center).
Do you work in my part of Glenview?
Yes. Our crews work across Glenview, including The Park, The Glen, The Grove — ZIP 60025, 60026, 60062 — and nearby Northbrook, Park Ridge, Des Plaines.

Working in Glenview

  • A lot of Glenview kitchens date from the 2000s. We know these layouts well and what is worth keeping.
  • Most Glenview homes are single-family. We protect floors and driveways and leave the site clean every day.
  • We know how Community Development, Inspectional Services Division (Development Center) handles kitchen permits and pull them for you.

The ParkThe GlenThe Grove

ZIP 60025ZIP 60026ZIP 60062

Pantry Design & Installation nearby

Planning a kitchen project in Glenview?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback