Mold under the sink with no visible leak
No puddle doesn't mean no moisture. Slow seepage, sweating pipes or an old leak that was never dried can feed growth under a sink.
Serving Park Ridge & nearby Des Plaines, Glenview
Kitchen Mold Remediation in Park Ridge, IL
Mold under the sink, behind the dishwasher or inside a wall? We fix the moisture and remove the mold from Park Ridge kitchens.
- Serving Park Ridge ZIP 60068
- Containment so the damage doesn't spread
- One team from cleanup to rebuild
Kitchen mold problems we take care of in Park Ridge
Spraying bleach on mold under a sink rarely solves it, because the source is still wet and the growth is often inside the particleboard or drywall. Our Park Ridge crew stops the moisture, sets up containment with HEPA air filtration and takes out what can't be cleaned.
Mold found during a remodel
If your remodel uncovered mold, we can stop that area, remove it properly and hand it back ready for the new kitchen.
A large area of mold
When growth covers a large area, roughly the size EPA guidance treats as larger, containment and the work plan get more involved. We size the containment to the job.
Mold behind the refrigerator
Spots on the wall behind the refrigerator usually trace to the water line. We stop it and clean or replace the drywall.
Musty smell with no mold in sight
Odor is often the first sign. We find the wet area and open it only where needed.
Condensation and window mold
Mold on the sill or wall under a kitchen window often comes from condensation. We clean or replace the affected parts and look at how the room is vented.
Mold inside a wall after a leak
Hidden wall mold is handled by removing the drywall and insulation that grew it and cleaning the studs.
Mold under the kitchen sink
Mold inside the sink cabinet is a symptom. We trace the water, cut out the affected cabinet bottom or back and check the wall behind it.
What we handle after the damage
- Fixing the moisture sourceThe leak, drip or condensation problem is repaired, or we tell you who needs to fix it first.
- ContainmentThe work area is sealed with plastic sheeting, and the rest of the kitchen and house is protected.
- HEPA air filtrationWe filter the air in the work area with HEPA equipment while materials are removed.
- Removing affected porous materialsMoldy drywall, insulation, particleboard and other porous materials are cut out and bagged.
- Cleaning what staysSolid materials that remain are cleaned of growth and debris.
- DryingWe confirm the materials are dry so growth doesn't restart.
- RebuildNew cabinet panels, drywall, insulation and finishes go back in.
Tools of the job
HEPA air scrubbersFiltered air movement that keeps the work area under control.
Containment sheetingSealed plastic walls that keep the work separate from the rest of the home.
Mold-resistant materialsMoisture-resistant drywall or plywood cabinet bottoms where it makes sense.
Replacement panels and drywallMaterials to rebuild the area after remediation.
HEPA vacuumsVacuums with HEPA filters used to clean surfaces and debris.
What the work looks like in Park Ridge homes
Problem
Fixed
DetailKitchen Mold Remediation in a two-story colonial from the 1990s, Park Ridge
This one is a two-story colonial from the 1990s in Park Ridge. What we started with: white cast-iron double sink and honey-oak cathedral raised-panel cabinets with worn finish near the handles, brass knobs. The main complaint was mold under the kitchen sink. After: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. Work included fixing the moisture source, cleaning what stays, plus rebuild.
Before
AfterA Des Plaines 1990s two-story colonial: before and after
This one is a 1990s two-story colonial in Des Plaines. The kitchen as it was: white double sink and white thermofoil cabinets peeling at the edges, oak trim. The main complaint was a swollen, spotted cabinet floor under the sink. The result: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. The job covered containment, HEPA air filtration, plus drying.
Kitchen Mold Remediation in Des Plaines →
Before
AfterKitchen Mold Remediation in a two-story colonial from the 1990s, Mount Prospect
The site: a two-story colonial from the 1990s in Mount Prospect. What we started with: solid-surface integrated sink and golden-oak cabinets with oak soffits above. What bothered the owners most: a musty smell that wouldn't go away. Finished kitchen: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. On site this meant cleaning what stays, drying, plus rebuild.
Kitchen Mold Remediation in Mount Prospect →
Before
AfterKitchen Remodeling in a postwar bi-level, Park Ridge
What changed: cabinets in forest green with matte black pulls, black honed granite counters, a green zellige-look tile backsplash, warm oak luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.
Kitchen Remodeling in Park Ridge →
Before
AfterKitchen Cabinet Painting in a 1950s ranch, Park Ridge
The same doors sprayed in light warm taupe, new unlacquered brass knobs and cup pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Park Ridge →Step by step after damage
- InspectA visit to assess the growth, the moisture and the plan.
- Fix the moistureThe leak or condensation is repaired before removal begins.
- Contain and removeContainment goes up, then moldy materials are removed and surfaces cleaned.
- Dry and rebuildWe confirm dryness, clean up and restore the cabinet, wall or floor.
Kitchen Mold Remediation questions from Park Ridge homeowners
Will bleach kill mold under my sink?
On particleboard or drywall, bleach doesn't solve it. The affected material needs to come out and the leak needs fixing.
Can mold be removed without replacing my cabinets?
Plywood and solid wood can often be cleaned; particleboard with growth is replaced. Whole cabinets rarely need to go.
What causes mold under the kitchen sink?
Almost always a leak, sometimes condensation. We find which before we start.
What affects the cost of mold remediation?
Area, access, materials removed and rebuilding are the main factors. We price it after we've seen it.
Can I clean small mold spots myself?
For a small patch on a hard surface, often yes. Growth in porous materials or a larger area needs removal under containment.
Do I need a permit for kitchen mold remediation in Park Ridge?
It depends on the scope. Park Ridge's rule in short: Park Ridge publishes permit guidelines by project type; contact the Permit Technicians to confirm whether a kitchen project needs a permit. We handle the permit when one is needed.
Do you work in my part of Park Ridge?
Yes. Our crews work across Park Ridge — ZIP 60068 — and nearby Des Plaines, Glenview, Skokie.
Working in Park Ridge
- A lot of Park Ridge kitchens date from the 1950s. We know these layouts well and what is worth keeping.
- Most Park Ridge homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Park Ridge building department handles kitchen permits and pull them for you.
ZIP 60068
Kitchen Mold Remediation nearby
Other kitchen services in Park Ridge
Kitchen Water Damage RestorationLeaks stopped, water extracted, cabinets and floors dried and rebuilt.
Kitchen Fire & Smoke RestorationSoot cleaned, smoke odor removed, burned cabinets and walls rebuilt.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.