Mold inside a wall after a leak
Hidden wall mold is handled by removing the drywall and insulation that grew it and cleaning the studs.
Serving Glenview & nearby Northbrook, Park Ridge
Kitchen Mold Remediation in Glenview, IL
Mold under the sink, behind the dishwasher or inside a wall? We fix the moisture and remove the mold from Glenview kitchens.
- Serving Glenview ZIP 60025, 60026, 60062
- Containment so the damage doesn't spread
- One team from cleanup to rebuild
Kitchen mold problems we take care of in Glenview
Spraying bleach on mold under a sink rarely solves it, because the source is still wet and the growth is often inside the particleboard or drywall. Our Glenview crew stops the moisture, sets up containment with HEPA air filtration and takes out what can't be cleaned.
Condensation and window mold
Winter condensation in kitchens is common around here. Fixing ventilation keeps the growth from returning after cleanup.
Mold that keeps coming back
Mold returns when the moisture does. We find why that spot stays wet, whether a leak, condensation or poor ventilation, and fix it before removal.
Mold on cabinet backs and particleboard
We remove mold-affected particleboard and match new panels to the cabinet where we can.
Mold found during a remodel
If your remodel uncovered mold, we can stop that area, remove it properly and hand it back ready for the new kitchen.
Mold behind or under the dishwasher
When we slide a dishwasher out after a leak, the hidden floor tells the story. Damaged sections are removed and the area dried.
Mold under the kitchen sink
The sink base is the most common place we find kitchen mold. A drain or supply drip keeps the particleboard damp, and that panel usually has to be replaced.
Mold behind the refrigerator
A leaking ice maker line or condensation from the fridge can grow mold on the wall and floor behind it. We pull it out, fix the line and remove what is affected.
What the restoration covers
- Inspection and moisture readingsFirst we map how far the moisture and growth reach and what caused them.
- Fixing the moisture sourceEPA advises fixing the water problem first; otherwise the mold returns.
- ContainmentThe work area is sealed with plastic sheeting, and the rest of the kitchen and house is protected.
- HEPA air filtrationAir scrubbers with HEPA filters run during the work, often with negative pressure on the containment.
- Removing affected porous materialsMaterials mold has grown into are removed rather than cleaned.
- Cleaning what staysFraming, plywood and other solid surfaces are HEPA-vacuumed and cleaned.
- RebuildNew cabinet panels, drywall, insulation and finishes go back in.
Tools of the job
Replacement panels and drywallMaterials to rebuild the area after remediation.
HEPA vacuumsVacuums with HEPA filters used to clean surfaces and debris.
Mold-resistant materialsMoisture-resistant drywall or plywood cabinet bottoms where it makes sense.
HEPA air scrubbersAir filtration machines that capture fine particles during removal.
Moisture metersReadings that show where moisture is and when drying is done.
Before and after: kitchens near Glenview
Problem
Fixed
DetailKitchen Mold Remediation in a 1990s two-story colonial, Glenview
This one is a 1990s two-story colonial near The Glen. The kitchen as it was: white cast-iron double sink and honey-oak cathedral raised-panel cabinets with worn finish near the handles, brass knobs. The main complaint was a musty smell that wouldn't go away. After: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. Work included fixing the moisture source, containment, plus removing affected porous materials.
Before
AfterA Northbrook 1980s two-story: before and after
A 1980s two-story near Techny, a typical kitchen for Northbrook. What we started with: white double sink and white thermofoil cabinets peeling at the edges, oak trim. The reason for the call: black spots on the back of the sink base. After: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. On site this meant fixing the moisture source, containment, plus rebuild.
Kitchen Mold Remediation in Northbrook →
Before
AfterKitchen Remodeling in a 1960s ranch, Glenview
Finished: cabinets in white uppers and dusty blue lowers with matte black pulls, bright white quartz counters, a terracotta-look square tile backsplash, black-and-white checkerboard tile flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Glenview →
Before
AfterBefore and after: a 1950s ranch in Glenview
Finished: the same doors sprayed in pale sage, new polished nickel pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Glenview →
Before
AfterGlenview kitchen, 1950s ranch: cabinet refacing
Finished: new five-piece shaker doors in soft white on the existing boxes, matching face-frame veneer and satin brass pulls.
Cabinet Refacing in Glenview →How restoration goes
- InspectA visit to assess the growth, the moisture and the plan.
- Fix the moistureThe source gets fixed first so the work lasts.
- Contain and removeThe area is sealed, HEPA filtration runs and affected materials come out.
- Dry and rebuildWe confirm dryness, clean up and restore the cabinet, wall or floor.
Kitchen Mold Remediation questions from Glenview homeowners
Do you need a license for mold remediation in Illinois?
No state license exists for it here. What matters is the method: source fixed, containment, HEPA filtration and removal of affected materials.
Can mold be removed without replacing my cabinets?
Often yes. Usually only the affected parts, like the sink base bottom or back panel, are replaced, and the rest of the kitchen stays.
Can I clean small mold spots myself?
EPA guidance says many small areas can be handled by a homeowner, and larger areas, roughly over 10 square feet, are better left to professionals. Either way, fix the moisture.
What causes mold under the kitchen sink?
Almost always a leak, sometimes condensation. We find which before we start.
How long does kitchen mold remediation take?
It depends on the size and whether drying is needed. Rebuilding cabinets or drywall adds time.
Glenview building permit for kitchen mold remediation: where do I apply?
Permits go through Community Development, Inspectional Services Division (Development Center), phone (847) 904-4330. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for kitchen mold remediation in Glenview?
It depends on the scope. Glenview's rule in short: Permit required for remodeling/altering a structure, changing the number or location of plumbing fixtures or piping, and new electrical work. We handle the permit when one is needed with Community Development, Inspectional Services Division (Development Center).
Do you work in my part of Glenview?
Yes. Our crews work across Glenview, including The Park, The Glen, The Grove — ZIP 60025, 60026, 60062 — and nearby Northbrook, Park Ridge, Des Plaines.
Working in Glenview
- A lot of Glenview kitchens date from the 2000s. We know these layouts well and what is worth keeping.
- Most Glenview homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Community Development, Inspectional Services Division (Development Center) handles kitchen permits and pull them for you.
The ParkThe GlenThe Grove
ZIP 60025ZIP 60026ZIP 60062
Kitchen Mold Remediation nearby
Other kitchen services in Glenview
Kitchen Water Damage RestorationLeaks stopped, water extracted, cabinets and floors dried and rebuilt.
Kitchen Fire & Smoke RestorationSoot cleaned, smoke odor removed, burned cabinets and walls rebuilt.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.