Mold behind the refrigerator
Spots on the wall behind the refrigerator usually trace to the water line. We stop it and clean or replace the drywall.
Serving Skokie & nearby Evanston, Park Ridge
Kitchen Mold Remediation in Skokie, IL
Mold under the sink, behind the dishwasher or inside a wall? We fix the moisture and remove the mold from Skokie kitchens.
- Serving Skokie ZIP 60076, 60077, 60203
- Containment so the damage doesn't spread
- One team from cleanup to rebuild
Kitchen mold problems we take care of in Skokie
Mold in a kitchen almost always follows water: a slow drip under the sink, a dishwasher leak or condensation behind the fridge. In Skokie we find and fix that moisture first, then contain the area, remove the affected materials and clean what stays.
Musty smell with no mold in sight
If the kitchen smells damp but every surface looks clean, the source is usually hidden. We check the likely spots first: sink base, behind appliances and the wall below a window.
Mold behind or under the dishwasher
When we slide a dishwasher out after a leak, the hidden floor tells the story. Damaged sections are removed and the area dried.
A large area of mold
When growth covers a large area, roughly the size EPA guidance treats as larger, containment and the work plan get more involved. We size the containment to the job.
Mold on cabinet backs and particleboard
Porous cabinet parts with mold are removed. Solid wood or plywood that is only surface-affected can often be cleaned and kept.
Mold inside a wall after a leak
Stains or bubbling paint on a kitchen wall can mean moisture and growth inside. We cut it open under containment and clean the framing.
Condensation and window mold
Winter condensation in kitchens is common around here. Fixing ventilation keeps the growth from returning after cleanup.
Mold under the sink with no visible leak
No puddle doesn't mean no moisture. Slow seepage, sweating pipes or an old leak that was never dried can feed growth under a sink.
From cleanup to rebuild
- Inspection and moisture readingsFirst we map how far the moisture and growth reach and what caused them.
- Fixing the moisture sourceEPA advises fixing the water problem first; otherwise the mold returns.
- ContainmentWe isolate the affected area so spores and dust stay inside it.
- Removing affected porous materialsMoldy drywall, insulation, particleboard and other porous materials are cut out and bagged.
- Cleaning what staysFraming, plywood and other solid surfaces are HEPA-vacuumed and cleaned.
- DryingThe area is dried and checked with meters before anything is closed up.
- Final cleaningA detailed cleanup of the work area finishes the remediation.
How we dry, clean and rebuild
Moisture metersReadings that show where moisture is and when drying is done.
HEPA vacuumsCleanup equipment that holds fine dust instead of blowing it around.
HEPA air scrubbersAir filtration machines that capture fine particles during removal.
Containment sheetingSealed plastic walls that keep the work separate from the rest of the home.
Replacement panels and drywallNew cabinet bottoms, backs, drywall and insulation for what was removed.
Before and after: kitchens near Skokie
Problem
Fixed
DetailKitchen Mold Remediation in a 1980s two-story, Skokie
This one is a 1980s two-story in Skokie. Before: white double sink and white thermofoil cabinets peeling at the edges, oak trim. What bothered the owners most: a swollen, spotted cabinet floor under the sink. After: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. The job covered inspection and moisture readings, removing affected porous materials, plus cleaning what stays.
Before
AfterAn Evanston 1920s bungalow: before and after
A 1920s bungalow in Evanston, a typical kitchen for Evanston. The kitchen as it was: stainless double sink under a window and 1980s honey-oak raised-panel cabinets installed over the old plaster. The main complaint was mold under the kitchen sink. The result: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. On site this meant removing affected porous materials, drying, plus final cleaning.
Kitchen Mold Remediation in Evanston →
Before
AfterA Park Ridge two-story colonial from the 1990s: before and after
The site: a two-story colonial from the 1990s in Park Ridge. Before: white cast-iron double sink and honey-oak cathedral raised-panel cabinets with worn finish near the handles, brass knobs. The main complaint was a musty smell that wouldn't go away. Finished kitchen: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. On site this meant removing affected porous materials, cleaning what stays, plus drying.
Kitchen Mold Remediation in Park Ridge →
Before
AfterBefore and after: a 1960s ranch in Skokie
Cabinets in light butter yellow with polished nickel pulls, black honed granite counters, a gray beveled subway tile backsplash, light oak hardwood flooring and two glass pendants and recessed lights.
Kitchen Remodeling in Skokie →
Before
AfterSkokie kitchen, 1960s ranch: kitchen cabinet painting
The same doors sprayed in powder blue, new satin brass pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Skokie →What happens after you call
- InspectWe look at the mold, find the moisture source and measure how far it reaches.
- Fix the moistureThe leak or condensation is repaired before removal begins.
- Contain and removeThe area is sealed, HEPA filtration runs and affected materials come out.
- Dry and rebuildWe confirm dryness, clean up and restore the cabinet, wall or floor.
Kitchen Mold Remediation questions from Skokie homeowners
How long does kitchen mold remediation take?
Small areas under a sink are often done in a day or two plus drying. Larger areas with wall or floor removal take longer.
Can mold be removed without replacing my cabinets?
Plywood and solid wood can often be cleaned; particleboard with growth is replaced. Whole cabinets rarely need to go.
Can I clean small mold spots myself?
EPA guidance says many small areas can be handled by a homeowner, and larger areas, roughly over 10 square feet, are better left to professionals. Either way, fix the moisture.
Will bleach kill mold under my sink?
It may make it look better for a while. Without fixing the moisture and removing porous material, it usually returns.
Do I have to disclose mold remediation when selling in Illinois?
Illinois disclosure forms ask about certain known conditions, and mold-related questions may apply. Ask your real estate attorney, and keep our paperwork showing what was done.
What is the Skokie building department phone number?
Permits go through Community Development Department - Building & Inspection Services Division (www.skokiepermits.com), phone (847) 933-8223. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for kitchen mold remediation in Skokie?
It depends on the scope. Skokie's rule in short: Electrical work and plumbing or electrical system changes need a permit. We handle the permit when one is needed with Community Development Department - Building & Inspection Services Division.
Do you work in my part of Skokie?
Yes. Our crews work across Skokie — ZIP 60076, 60077, 60203 — and nearby Evanston, Park Ridge, Glenview.
Working in Skokie
- A lot of Skokie kitchens date from the 1950s. We know these layouts well and what is worth keeping.
- Most Skokie homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Community Development Department - Building & Inspection Services Division handles kitchen permits and pull them for you.
ZIP 60076ZIP 60077ZIP 60203
Kitchen Mold Remediation nearby
Other kitchen services in Skokie
Kitchen Water Damage RestorationLeaks stopped, water extracted, cabinets and floors dried and rebuilt.
Kitchen Fire & Smoke RestorationSoot cleaned, smoke odor removed, burned cabinets and walls rebuilt.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.