Serving Mount Prospect & nearby Des Plaines, Arlington Heights

Kitchen Mold Remediation in Mount Prospect, IL

Mold under the sink, behind the dishwasher or inside a wall? We fix the moisture and remove the mold from Mount Prospect kitchens.

  • Crews covering Mount Prospect ZIP 60056, 60005
  • We stop the cause first, then dry, clean and rebuild
  • Photos and notes you can share with your insurer

Prefer a callback?

Leave your number and a Mount Prospect mold remediation technician will call you.

Kitchen mold problems we take care of in Mount Prospect

Mold in a kitchen almost always follows water: a slow drip under the sink, a dishwasher leak or condensation behind the fridge. In Mount Prospect we find and fix that moisture first, then contain the area, remove the affected materials and clean what stays.

Mold from a neighbor's leak

In Mount Prospect condo buildings, water from the unit above or a shared wall can cause mold in your kitchen. We document the source and remediate your side.

Mold under the sink with no visible leak

Sometimes the leak is intermittent, like a dishwasher drain that drips only during a cycle, or condensation on a cold pipe. We test the connections and meter the wood to find it.

Mold behind or under the dishwasher

Musty smells near the dishwasher often lead to mold on the subfloor or cabinet side. We remove the affected materials after fixing the leak.

Mold on cabinet backs and particleboard

Porous cabinet parts with mold are removed. Solid wood or plywood that is only surface-affected can often be cleaned and kept.

A large area of mold

When growth covers a large area, roughly the size EPA guidance treats as larger, containment and the work plan get more involved. We size the containment to the job.

Mold found during a remodel

Tear-out sometimes reveals old leak damage with growth. That gets remediated, not covered up by new drywall.

Mold behind the refrigerator

A leaking ice maker line or condensation from the fridge can grow mold on the wall and floor behind it. We pull it out, fix the line and remove what is affected.

Mold inside a wall after a leak

Stains or bubbling paint on a kitchen wall can mean moisture and growth inside. We cut it open under containment and clean the framing.

What the restoration covers

  • Inspection and moisture readingsWe look at the visible growth, check surrounding materials with a meter and find the moisture source.
  • Fixing the moisture sourceThe leak, drip or condensation problem is repaired, or we tell you who needs to fix it first.
  • ContainmentThe work area is sealed with plastic sheeting, and the rest of the kitchen and house is protected.
  • Removing affected porous materialsMaterials mold has grown into are removed rather than cleaned.
  • Cleaning what staysSolid materials that remain are cleaned of growth and debris.
  • DryingWe confirm the materials are dry so growth doesn't restart.
  • Final cleaningThe containment area is HEPA-vacuumed and wiped down before the plastic comes down.

Methods and equipment

HEPA vacuumsCleanup equipment that holds fine dust instead of blowing it around.
Moisture metersTools to find wet materials and confirm they are dry before closing up.
HEPA air scrubbersFiltered air movement that keeps the work area under control.
Mold-resistant materialsMoisture-resistant drywall or plywood cabinet bottoms where it makes sense.
Containment sheetingPlastic barriers, zip doors and tape that isolate the work area.

Before and after: kitchens near Mount Prospect

Kitchen Mold Remediation in a 1980s-1990s two-story colonial / tract house — problemProblem
Kitchen Mold Remediation in a 1980s-1990s two-story colonial / tract house — fixedFixed
Kitchen Mold Remediation in a 1980s-1990s two-story colonial / tract house — detailDetail

Before and after: a 1990s two-story colonial in Mount Prospect

A 1990s two-story colonial in Mount Prospect, a typical kitchen for Mount Prospect. Before: solid-surface integrated sink and golden-oak cabinets with oak soffits above. The reason for the call: a musty smell that wouldn't go away. After: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. On site this meant containment, cleaning what stays, plus drying.

Kitchen Mold Remediation project in Des Plaines, beforeBefore
Kitchen Mold Remediation project in Des Plaines, afterAfter

A Des Plaines 1980s two-story: before and after

This one is a 1980s two-story in Des Plaines. The kitchen as it was: white double sink and white thermofoil cabinets peeling at the edges, oak trim. What bothered the owners most: a swollen, spotted cabinet floor under the sink. The result: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. On site this meant fixing the moisture source, cleaning what stays, plus final cleaning.

Kitchen Mold Remediation in Des Plaines →
Kitchen Mold Remediation project in Arlington Heights, beforeBefore
Kitchen Mold Remediation project in Arlington Heights, afterAfter

Kitchen Mold Remediation in a 1980s two-story, Arlington Heights

A 1980s two-story in Arlington Heights, a typical kitchen for Arlington Heights. Before: white cast-iron double sink and honey-oak cathedral raised-panel cabinets with worn finish near the handles, brass knobs. The main complaint was mold under the kitchen sink. The result: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. Work included fixing the moisture source, containment, plus removing affected porous materials.

Kitchen Mold Remediation in Arlington Heights →
Kitchen Remodeling project near Mount Prospect, beforeBefore
Kitchen Remodeling project near Mount Prospect, afterAfter

A Mount Prospect postwar bi-level: before and after

Finished: cabinets in white uppers and dusty blue lowers with matte black pulls, bright white quartz counters, a terracotta-look square tile backsplash, black-and-white checkerboard tile flooring and recessed lights and under-cabinet LED strips.

Kitchen Remodeling in Mount Prospect →
Kitchen Cabinet Painting project near Mount Prospect, beforeBefore
Kitchen Cabinet Painting project near Mount Prospect, afterAfter

Kitchen Cabinet Painting in a 1950s ranch, Mount Prospect

Finished: the same doors sprayed in pale sage, new polished nickel pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Mount Prospect →

Step by step after damage

  1. InspectWe look at the mold, find the moisture source and measure how far it reaches.
  2. Fix the moistureThe leak or condensation is repaired before removal begins.
  3. Contain and removeThe area is sealed, HEPA filtration runs and affected materials come out.
  4. Dry and rebuildOnce dry and clean, the kitchen is put back together.

Kitchen Mold Remediation questions from Mount Prospect homeowners

What affects the cost of mold remediation?
A small sink-base job and a full wall cavity are very different. The scope, containment and repairs drive the price, and you get it in writing.
Will bleach kill mold under my sink?
Bleach can lighten the surface but doesn't fix moisture or reach growth inside porous materials. EPA doesn't recommend it as a routine cleanup step.
Do I need mold testing before remediation?
Testing is a choice, not a requirement in most kitchen cases. When owners want it, we suggest a separate, independent company so the results stand on their own.
Can mold be removed without replacing my cabinets?
Plywood and solid wood can often be cleaned; particleboard with growth is replaced. Whole cabinets rarely need to go.
Do you need a license for mold remediation in Illinois?
Illinois doesn't have a state mold remediation license. We follow industry practice such as IICRC guidance and EPA recommendations for containment and removal.
Does kitchen mold remediation need a Mount Prospect building permit, and who files it?
Permits go through Community Development Department - Building & Inspection Services, phone (847) 870-5675. When your scope needs one, we prepare the application and schedule the inspections.
Can you do kitchen mold remediation in a Mount Prospect condo?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
Do I need a permit for kitchen mold remediation in Mount Prospect?
It depends on the scope. Mount Prospect's rule in short: Kitchen remodels need a permit and a code review (about 10 business days). We handle the permit when one is needed with Community Development Department - Building & Inspection Services.
Do you work in my part of Mount Prospect?
Yes. Our crews work across Mount Prospect — ZIP 60056, 60005 — and nearby Des Plaines, Arlington Heights, Elk Grove Village.

Working in Mount Prospect

  • A lot of Mount Prospect kitchens date from the 1960s. We know these layouts well and what is worth keeping.
  • Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.
  • We know how Community Development Department - Building & Inspection Services handles kitchen permits and pull them for you.

ZIP 60056ZIP 60005

Kitchen Mold Remediation nearby

Planning a kitchen project in Mount Prospect?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback