Serving Oak Brook & nearby Villa Park, Lombard

Kitchen Faucet Installation in Oak Brook, IL

Pull-down, touchless and two-handle kitchen faucets installed leak-free by licensed plumbers in Oak Brook.

  • Serving Oak Brook ZIP 60523
  • Installed level, sealed and tested before we leave
  • Clear price for the install before the visit

Prefer a callback?

Leave your number and a Oak Brook licensed plumber will call you.

Kitchen faucet problems we fix in Oak Brook

Whether you picked a pull-down, a touchless or a bridge faucet, we fit it to your sink or counter in Oak Brook, cover or reuse the extra holes, and connect it with new supply lines.

Scale on the aerator from lake water

White crust on the spray face is mineral buildup. Many Oak Brook owners just need the aerator cleaned or swapped, not a new faucet.

Hard well water wearing out faucets

Hard well water scales cartridges and spray heads faster. Faucets with easy-to-replace cartridges and nozzles you can wipe clean hold up better.

Spout too short or too low

Spout height and reach matter as much as style. We match the faucet to your sink size so water lands in the center of the bowl.

Low flow or a sputtering spout

A spout that spits or barely runs usually has debris or mineral buildup in the aerator. If cleaning doesn't help, the cartridge or supply valve may be partly blocked.

Leaking from the handle

Leaks at the lever come from the valve inside the body. We replace the cartridge or the whole faucet, depending on its age.

Wanting a touchless faucet

Touchless faucets need power under the sink, either batteries or a plug-in adapter. We plan the control box and its power when we install.

Faucet loose or wobbling on the sink

A faucet that rocks when you use it has a loose mounting nut underneath. We tighten or replace the mounting hardware and reseat the gasket.

Hole count doesn't match the new faucet

A single-hole faucet on a three-hole sink needs a deck plate. A widespread faucet needs three holes, which we can drill in stone counters.

What we hook up and check

  • Check the sink and suppliesWe look at the hole layout, the valves and the space under the sink before you choose.
  • Shut off and removeWater off, supply lines disconnected and the old faucet unbolted.
  • Replace valves when neededSeized or leaking stops replaced with quarter-turn valves.
  • Mount the faucetFaucet set with its gasket or deck plate and tightened from below.
  • Pull-down hose and weightSpray hose routed clear of the drain and disposal, weight set so it retracts.
  • Supply connectionsNew braided supply lines connected and tightened without strain.
  • Power for touchless modelsControl box mounted and battery pack or plug-in adapter set up.

Models, parts and fittings

Filtered-water and pot-filler tapsExtra taps that use a spare hole or a separate supply line.
Pull-down faucetsHigh spout with a docking spray head for rinsing and filling pots.
Pull-out faucetsGood under low cabinets or windows where a tall spout won't fit.
FinishesChrome wipes clean easily; matte and brushed finishes hide spots.
Deck platesTrim that lets a one-hole faucet sit cleanly on a three-hole sink.

What the work looks like in Oak Brook homes

Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — installedInstalled
Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — detailDetail

Oak Brook kitchen, 1990s two-story colonial: kitchen faucet installation

The site: a 1990s two-story colonial in Oak Brook. Before: white cast-iron double sink. The main complaint was an old two-handle faucet that dripped into a worn porcelain bowl. Finished kitchen: a new single-handle pull-down faucet with a clean caulk line. On site this meant check the sink and supplies, shut off and remove, plus pull-down hose and weight.

Kitchen Faucet Installation project in Villa Park, beforeBefore
Kitchen Faucet Installation project in Villa Park, afterAfter

Kitchen Faucet Installation in a two-story colonial from the 1990s, Villa Park

This one is a two-story colonial from the 1990s in Villa Park. Before: white double sink. The reason for the call: a leaking two-handle faucet with a side sprayer. The result: a new single-handle pull-down faucet with a clean caulk line. On site this meant replace valves when needed, mount the faucet, plus power for touchless models.

Kitchen Faucet Installation in Villa Park →
Kitchen Faucet Installation project in Lombard, beforeBefore
Kitchen Faucet Installation project in Lombard, afterAfter

Before and after: a suburban townhome in Lombard

This one is a suburban townhome in Lombard. What we started with: stainless double sink. The main complaint was a leaking two-handle faucet with a side sprayer. After: a new single-handle pull-down faucet with a clean caulk line. The job covered shut off and remove, replace valves when needed, plus pull-down hose and weight.

Kitchen Faucet Installation in Lombard →
Kitchen Plumbing Relocation project near Oak Brook, beforeBefore
Kitchen Plumbing Relocation project near Oak Brook, afterAfter

Before and after: a 1970s tract home in Oak Brook

Finished: a new island with a prep sink, the drain, vent and water lines relocated from the old wall.

Kitchen Plumbing Relocation in Oak Brook →
Kitchen Remodeling project near Oak Brook, beforeBefore
Kitchen Remodeling project near Oak Brook, afterAfter

Oak Brook kitchen, raised ranch: kitchen remodeling

Cabinets in white uppers and dusty blue lowers with satin brass pulls, white quartz with soft gray veining counters, a white 2x8 tile in a vertical stack backsplash, hickory luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.

Kitchen Remodeling in Oak Brook →

From the old unit to the new one

  1. Pick a faucetChoose one yourself or ask us what fits your sink and holes.
  2. Check the setupWe confirm the hole count, valves and clearances.
  3. Written estimateAn itemized quote for the install and parts before we start.
  4. Install and testThe faucet goes in, a licensed plumber connects it and we test every joint.

Kitchen Faucet Installation questions from Oak Brook homeowners

Are touchless faucets worth it?
If hands-free matters to you, yes. Plan for the control box and its power supply.
Do I need a plumber to install a faucet?
In Illinois, plumbing is done by plumbers licensed by the Illinois Department of Public Health. Our licensed plumbers install and connect your faucet.
Can you add a filtered-water faucet?
Yes. A separate filtered tap can use an existing hole or a new one, with the filter mounted under the sink.
Pull-down or pull-out: which should I choose?
If there's room above the sink, a pull-down. If space is tight, a pull-out.
Should I replace the shut-off valves too?
We test them first. Valves that are stiff, crusted or weeping get replaced with quarter-turn ones.
Oak Brook contractor registration: do kitchen contractors need it?
Oak Brook does not require contractor registration; no village-specific requirements for residential alterations. We take care of that before work starts.
Oak Brook water: how does it affect faucet installation?
Oak Brook's water source: Purchased Lake Michigan water via DuPage Water Commission (Chicago Jardine plant); deep wells are emergency backup only; reported hardness is Lake Michigan water via DuPage Water Commission; regional hardness about 8 grains per gallon (137 mg/L as CaCO3). Aerators and cartridges scale faster with harder water.
Oak Brook plumbing code: who can do the plumbing for faucet installation?
Current Illinois plumbing license (055 and 058) or current City of Chicago license; other municipalities' business licenses not acceptable. Our plumbing connections are made by licensed plumbers.
Oak Brook building permit for faucet installation: where do I apply?
Permits go through Development Services (Building), phone (630) 368-5101. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for faucet installation in Oak Brook?
It depends on the scope. Oak Brook's rule in short: Village publishes a Residential Permit Requirement Listing; its Residential Alteration category requires contract/scope of work, architectural plans and plat of survey. We handle the permit when one is needed with Development Services (Building).
Do you work in my part of Oak Brook?
Yes. Our crews work across Oak Brook — ZIP 60523 — and nearby Villa Park, Lombard, Elmhurst.

Working in Oak Brook

  • A lot of Oak Brook kitchens date from the 1970s. We know these layouts well and what is worth keeping.
  • Most Oak Brook homes are single-family. We protect floors and driveways and leave the site clean every day.
  • We know how Development Services (Building) handles kitchen permits and pull them for you.

ZIP 60523

Kitchen Faucet Installation nearby

Planning a kitchen project in Oak Brook?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback