Serving Downers Grove & nearby Lisle, Woodridge

Kitchen Faucet Installation in Downers Grove, IL

Pull-down, touchless and two-handle kitchen faucets installed leak-free by licensed plumbers in Downers Grove.

  • Installers working in Downers Grove ZIP 60515, 60516
  • Hookups by licensed trades where the code calls for it
  • Old unit hauled away on request

Prefer a callback?

Leave your number and a Downers Grove licensed plumber will call you.

Kitchen faucet problems we fix in Downers Grove

We install kitchen faucets in Downers Grove: the old one off, seized shut-off valves replaced when needed, the new faucet mounted to fit your sink holes and every supply connection checked under pressure.

Scale on the aerator from lake water

Lake water carries some minerals that collect in the faucet's screen. We clean or replace the aerator before suggesting anything bigger.

Worried about lead at the kitchen tap

If Downers Grove lists your line as lead, a new faucet plus a filter certified for lead reduction is a sensible step for drinking water.

Wanting a touchless faucet

A touchless kitchen faucet is a standard install with one extra piece: the control box and its power supply. We fit both.

Low flow or a sputtering spout

Weak flow at the kitchen faucet while other taps are fine is often a clogged aerator or a scaled spray head. We clean or replace them first.

Hole count doesn't match the new faucet

A single-hole faucet on a three-hole sink needs a deck plate. A widespread faucet needs three holes, which we can drill in stone counters.

Leak under the sink at the faucet lines

Drips under the sink near the faucet shank point to a loose connection or a split hose. We redo the supply side and test it.

Shut-off valves that won't turn

Seized stops are the most common surprise on a faucet job. New quarter-turn valves make the next repair easy.

Faucet leaking from the base

Water pooling around the base of the spout usually means worn O-rings inside the swivel. On an older faucet, replacement is often the better call.

Included with the install

  • Check the sink and suppliesA check of the sink holes, shut-offs and clearances so the faucet fits.
  • Clean the deckThe sink or counter around the holes cleaned so the new base seals.
  • Replace valves when neededNew shut-off valves if the old ones won't close or weep.
  • Mount the faucetNew faucet mounted level and secure on the sink or counter.
  • Pull-down hose and weightSprayer hose connected and its counterweight placed correctly.
  • Extra holesDeck plate, soap pump or second faucet for any leftover holes.
  • Flush and testWe run hot and cold, test the sprayer and look for drips below.

What to pick before the install

FinishesStainless, chrome, matte black and brass finishes, each with its own care.
Touchless and touch faucetsHands-free models for messy hands, with a control box below.
Filtered-water and pot-filler tapsA small second faucet for filtered water, or a wall-mounted pot filler by the range.
Deck platesA cover plate that hides extra holes under a single-hole faucet.
Pull-down faucetsHigh spout with a docking spray head for rinsing and filling pots.

Kitchens like yours in Downers Grove: before and after

Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — installedInstalled
Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — detailDetail

Before and after: a 1980s two-story in Downers Grove

A 1980s two-story near Shady Lane Estates, a typical kitchen for Downers Grove. Before: solid-surface integrated sink. The main complaint was a leaking faucet with handles that were hard to turn. After: a new single-handle pull-down faucet with a clean caulk line. Work included mount the faucet, pull-down hose and weight, plus flush and test.

Kitchen Faucet Installation project in Lisle, beforeBefore
Kitchen Faucet Installation project in Lisle, afterAfter

Kitchen Faucet Installation in a 1980s condo, Lisle

The site: a 1980s condo near Four Lakes Village. The kitchen as it was: stainless double sink. The reason for the call: a faucet too low to fill a stockpot. After: a new single-handle pull-down faucet with a clean caulk line. The job covered check the sink and supplies, replace valves when needed, plus flush and test.

Kitchen Faucet Installation in Lisle →
Kitchen Faucet Installation project in Oak Brook, beforeBefore
Kitchen Faucet Installation project in Oak Brook, afterAfter

Kitchen Faucet Installation in a 1990s two-story colonial, Oak Brook

This one is a 1990s two-story colonial in Oak Brook. The kitchen as it was: white cast-iron double sink. The reason for the call: an old two-handle faucet that dripped into a worn porcelain bowl. Finished kitchen: a new single-handle pull-down faucet with a clean caulk line. Work included check the sink and supplies, extra holes, plus flush and test.

Kitchen Faucet Installation in Oak Brook →
Kitchen Plumbing Relocation project near Downers Grove, beforeBefore
Kitchen Plumbing Relocation project near Downers Grove, afterAfter

Kitchen Plumbing Relocation in a 1960s ranch, Downers Grove

A new island with a prep sink, the drain, vent and water lines relocated from the old wall.

Kitchen Plumbing Relocation in Downers Grove →
Kitchen Remodeling project near Downers Grove, beforeBefore
Kitchen Remodeling project near Downers Grove, afterAfter

Before and after: a 1950s ranch in Downers Grove

Finished: cabinets in light butter yellow with satin brass pulls, creamy quartzite-look quartz counters, a green zellige-look tile backsplash, warm oak luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.

Kitchen Remodeling in Downers Grove →

Install day

  1. Pick a faucetChoose one yourself or ask us what fits your sink and holes.
  2. Check the setupA quick look under the sink tells us what else the job needs.
  3. Written estimateAn itemized quote for the install and parts before we start.
  4. Install and testInstalled, flushed and checked for leaks, usually in one visit.

Kitchen Faucet Installation questions from Downers Grove homeowners

Can a handyman install a kitchen faucet?
Illinois requires plumbing work to be done by licensed plumbers. We send a licensed plumber, so the valves and connections are covered too.
My new faucet doesn't fit my sink holes. What now?
A deck plate covers extra holes; a faucet that needs more holes may need one drilled. We sort it out at install.
How long does it take to install a kitchen faucet?
Often an hour or two. Seized valves, a stuck old faucet or a new hole in stone add time.
Repair or replace a dripping faucet?
A new cartridge fixes many drips on a good faucet. Builder-grade and older faucets are usually better replaced.
Should I replace the shut-off valves too?
Often yes. A new faucet on old valves is the most common setup for a future leak.
Downers Grove water: how does it affect faucet installation?
Downers Grove's water source: Lake Michigan water purchased from the City of Chicago via the DuPage Water Commission. Aerators and cartridges scale faster with harder water.
Downers Grove building permit for faucet installation: where do I apply?
Permits go through Community Development Department, Building Division (https://cvportal.downers.us), phone 630-434-5515. When your scope needs one, we prepare the application and schedule the inspections.
What is Downers Grove doing about lead water lines?
2026 inventory: 17,063 total service lines; 1,285 lead. A filter certified for lead reduction is a sensible step until your line is confirmed or replaced.
Do I need a permit for faucet installation in Downers Grove?
It depends on the scope. Downers Grove's rule in short: Village states most projects require a permit and applications are submitted online; First review about 10 business days. We handle the permit when one is needed with Community Development Department, Building Division.
Do you work in my part of Downers Grove?
Yes. Our crews work across Downers Grove, including Denburn Woods, Shady Lane Estates, E.H. Prince Subdivision — ZIP 60515, 60516 — and nearby Lisle, Woodridge, Oak Brook.

Working in Downers Grove

  • A lot of Downers Grove kitchens date from the 1970s. We know these layouts well and what is worth keeping.
  • Most Downers Grove homes are single-family. We protect floors and driveways and leave the site clean every day.
  • Live in a historic district? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.

Denburn WoodsShady Lane EstatesE.H. Prince Subdivision

ZIP 60515ZIP 60516

Kitchen Faucet Installation nearby

Planning a kitchen project in Downers Grove?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback