Serving Oak Brook & nearby Villa Park, Lombard

Kitchen Sink Installation & Replacement in Oak Brook, IL

Undermount, drop-in and farmhouse sinks set, sealed and connected by licensed plumbers in Oak Brook.

  • Installers working in Oak Brook ZIP 60523
  • Hookups by licensed trades where the code calls for it
  • Old unit hauled away on request

Prefer a callback?

Leave your number and a Oak Brook licensed plumber will call you.

Kitchen sink problems we fix in Oak Brook

Swapping a sink looks simple until the new bowl doesn't match the cutout or the drain lands in the wrong spot. Our Oak Brook crew measures first, then sets the sink and has a licensed plumber hook up the drain and supplies.

1970s stainless double sink

The thin stainless double sink from the 1970s dents and drums. A heavier-gauge single or low-divide bowl is a common replacement.

Double bowl too small for big pans

Many owners trade a divided sink for one wide basin. We reconfigure the drain for the single outlet and reconnect the disposal.

Old drain parts that won't line up

Deeper bowls lower the drain outlet. If it ends up below the wall connection, we adjust the trap arm so the sink still drains properly.

Sink installed with the counter replacement

New countertops are the best time for a new sink. We coordinate the cutout with the fabricator and do the hookup after install.

Dated sink in an otherwise good kitchen

Not every update needs new counters. A new sink and faucet change how the kitchen looks and works in a day.

Strainer or drain leaking

A leak at the drain flange is usually the strainer, not the sink. We replace it, and with a new sink we always fit new strainers.

Undermount sink pulling away from the counter

A gap between the sink rim and the stone means the clips or adhesive have failed. We take the weight off, remount it with new clips or a support rail and reseal the joint.

Sink that drains slowly after replacement

Slow draining right after an install points to the connection, not the bowl. We correct the pitch and the fittings.

What the install includes

  • Measure the cutout and cabinetWe measure the counter opening, the sink base and the drain position before you pick a sink.
  • Shut off and disconnectWater shut off, faucet, disposal and dishwasher lines disconnected.
  • Remove the old sinkOld sealant cut, clips released and the old bowl lifted out.
  • Cabinet changes for farmhouse sinksCabinet front modified and the sink supported from below.
  • Faucet and accessoriesYour old faucet reused or a new one mounted on the sink or counter.
  • Disposal and dishwasher hookupAppliance connections restored with a high loop or air gap as code requires.
  • Supply valves and linesFresh supply connections from the valves to the faucet.

Models, parts and fittings

Drop-in (top-mount)Rests on the counter with a rim; works with laminate as well as stone.
Granite compositeQuartz or granite composite bowls in solid colors, resistant to scratches.
Workstation sinksBowls with a ledge for cutting boards, colanders and drying racks.
UndermountHung under the countertop; needs a finished cutout edge and a strong counter.
Farmhouse (apron-front)Apron sinks sit forward of the cabinets and need support built in.

Kitchens like yours in Oak Brook: before and after

Kitchen Sink Installation & Replacement in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Sink Installation & Replacement in a 1980s-1990s two-story colonial / tract house — installedInstalled
Kitchen Sink Installation & Replacement in a 1980s-1990s two-story colonial / tract house — detailDetail

Before and after: a two-story colonial from the 1990s in Oak Brook

The site: a two-story colonial from the 1990s in Oak Brook. Before: white double sink. What bothered the owners most: two small bowls where big pots never fit. Finished kitchen: a new undermount stainless single-bowl sink with a pull-down faucet. On site this meant remove the old sink, faucet and accessories, plus supply valves and lines.

Kitchen Sink Installation & Replacement project in Villa Park, beforeBefore
Kitchen Sink Installation & Replacement project in Villa Park, afterAfter

Kitchen Sink Installation & Replacement in a two-story colonial from the 1990s, Villa Park

The site: a two-story colonial from the 1990s in Villa Park. The kitchen as it was: white cast-iron double sink. What bothered the owners most: worn enamel and rust spots in the old bowl. After: a new undermount stainless single-bowl sink with a pull-down faucet. On site this meant measure the cutout and cabinet, shut off and disconnect, plus disposal and dishwasher hookup.

Kitchen Sink Installation & Replacement in Villa Park →
Kitchen Sink Installation & Replacement project in Lombard, beforeBefore
Kitchen Sink Installation & Replacement project in Lombard, afterAfter

Kitchen Sink Installation & Replacement in a 1980s two-story, Lombard

A 1980s two-story in Lombard, a typical kitchen for Lombard. The kitchen as it was: solid-surface integrated sink. The main complaint was a scratched integrated sink that never looked clean. The result: a new undermount stainless single-bowl sink with a pull-down faucet. On site this meant measure the cutout and cabinet, remove the old sink, plus disposal and dishwasher hookup.

Kitchen Sink Installation & Replacement in Lombard →
Kitchen Remodeling project near Oak Brook, beforeBefore
Kitchen Remodeling project near Oak Brook, afterAfter

Oak Brook kitchen, 1970s split-level: kitchen remodeling

Finished: cabinets in white uppers and dusty blue lowers with satin brass pulls, white quartz with soft gray veining counters, a white 2x8 tile in a vertical stack backsplash, hickory luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.

Kitchen Remodeling in Oak Brook →
Kitchen Cabinet Painting project near Oak Brook, beforeBefore
Kitchen Cabinet Painting project near Oak Brook, afterAfter

Before and after: a raised ranch in Oak Brook

Finished: the same doors sprayed in sage green, new matte black pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Oak Brook →

Install day

  1. Pick the sinkChoose the material and style, or ask us what fits your counter and cabinet.
  2. Measure and planWe check the cutout, the cabinet and the drain, and plan any cabinet changes.
  3. Written estimateA clear quote listing the sink work, parts and any cabinet modifications.
  4. Install and connectWe mount the sink and hook up the drain, faucet and appliances.
  5. Cure and testAdhesive and sealant cure, then we run water and check every joint.

Kitchen Sink Installation & Replacement questions from Oak Brook homeowners

Will Lake Michigan water mark my new sink?
Mineral spots can appear on any sink. Lighter composites and brushed stainless hide them better than dark matte finishes.
Can you reuse my old faucet and disposal?
If they are in good shape and fit the new sink, yes. Many owners replace the faucet at the same time since it's already off.
Do you need a plumber to install a kitchen sink?
In Illinois, plumbing connections are work for plumbers licensed by the Illinois Department of Public Health. Our licensed plumbers make the drain and supply connections.
Can a fallen undermount sink be reattached?
Usually yes. We support the sink, clean off old sealant, refasten it with new clips or a support rail and reseal it.
How long does a sink replacement take?
Most sink replacements take a day; cabinet modifications or new counters add time.
Oak Brook building permit for sink replacement: where do I apply?
Permits go through Development Services (Building), phone (630) 368-5101. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a Oak Brook-registered contractor for sink replacement?
Oak Brook does not require contractor registration; no village-specific requirements for residential alterations. We take care of that before work starts.
Oak Brook plumbing code: who can do the plumbing for sink replacement?
Current Illinois plumbing license (055 and 058) or current City of Chicago license; other municipalities' business licenses not acceptable. Our plumbing connections are made by licensed plumbers.
Oak Brook water: how does it affect sink replacement?
Oak Brook's water source: Purchased Lake Michigan water via DuPage Water Commission (Chicago Jardine plant); deep wells are emergency backup only; reported hardness is Lake Michigan water via DuPage Water Commission; regional hardness about 8 grains per gallon (137 mg/L as CaCO3). We plan fittings and filters around it.
Do I need a permit for sink replacement in Oak Brook?
It depends on the scope. Oak Brook's rule in short: Village publishes a Residential Permit Requirement Listing; its Residential Alteration category requires contract/scope of work, architectural plans and plat of survey. We handle the permit when one is needed with Development Services (Building).
Do you work in my part of Oak Brook?
Yes. Our crews work across Oak Brook — ZIP 60523 — and nearby Villa Park, Lombard, Elmhurst.

Working in Oak Brook

  • A lot of Oak Brook kitchens date from the 1970s. We know these layouts well and what is worth keeping.
  • Most Oak Brook homes are single-family. We protect floors and driveways and leave the site clean every day.
  • We know how Development Services (Building) handles kitchen permits and pull them for you.

ZIP 60523

Kitchen Sink Installation & Replacement nearby

Planning a kitchen project in Oak Brook?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback