Mold under the kitchen sink
The sink base is the most common place we find kitchen mold. A drain or supply drip keeps the particleboard damp, and that panel usually has to be replaced.
Serving Northbrook & nearby Glenview, Highland Park
Kitchen Mold Remediation in Northbrook, IL
Mold under the sink, behind the dishwasher or inside a wall? We fix the moisture and remove the mold from Northbrook kitchens.
- Serving Northbrook ZIP 60062
- Containment so the damage doesn't spread
- One team from cleanup to rebuild
Kitchen mold problems we take care of in Northbrook
Spraying bleach on mold under a sink rarely solves it, because the source is still wet and the growth is often inside the particleboard or drywall. Our Northbrook crew stops the moisture, sets up containment with HEPA air filtration and takes out what can't be cleaned.
Mold that keeps coming back
Mold returns when the moisture does. We find why that spot stays wet, whether a leak, condensation or poor ventilation, and fix it before removal.
Mold under the sink with no visible leak
No puddle doesn't mean no moisture. Slow seepage, sweating pipes or an old leak that was never dried can feed growth under a sink.
Musty smell with no mold in sight
Odor is often the first sign. We find the wet area and open it only where needed.
A large area of mold
When growth covers a large area, roughly the size EPA guidance treats as larger, containment and the work plan get more involved. We size the containment to the job.
Mold behind the refrigerator
A leaking ice maker line or condensation from the fridge can grow mold on the wall and floor behind it. We pull it out, fix the line and remove what is affected.
Mold behind or under the dishwasher
Musty smells near the dishwasher often lead to mold on the subfloor or cabinet side. We remove the affected materials after fixing the leak.
Mold inside a wall after a leak
Hidden wall mold is handled by removing the drywall and insulation that grew it and cleaning the studs.
What the restoration covers
- Inspection and moisture readingsFirst we map how far the moisture and growth reach and what caused them.
- ContainmentWe isolate the affected area so spores and dust stay inside it.
- HEPA air filtrationWe filter the air in the work area with HEPA equipment while materials are removed.
- Cleaning what staysSolid materials that remain are cleaned of growth and debris.
- DryingThe area is dried and checked with meters before anything is closed up.
- Final cleaningA detailed cleanup of the work area finishes the remediation.
- RebuildWe restore the cabinet, wall or floor that was removed.
How we dry, clean and rebuild
Mold-resistant materialsOptions that hold up better in a spot that has seen water.
Containment sheetingSealed plastic walls that keep the work separate from the rest of the home.
Replacement panels and drywallNew cabinet bottoms, backs, drywall and insulation for what was removed.
HEPA vacuumsVacuums with HEPA filters used to clean surfaces and debris.
Moisture metersTools to find wet materials and confirm they are dry before closing up.
Before and after: kitchens near Northbrook
Problem
Fixed
DetailKitchen Mold Remediation in a two-story colonial from the 1990s, Northbrook
A two-story colonial from the 1990s in Northbrook, a typical kitchen for Northbrook. Before: white double sink and white thermofoil cabinets peeling at the edges, oak trim. What bothered the owners most: black spots on the back of the sink base. Finished kitchen: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. Work included containment, HEPA air filtration, plus cleaning what stays.
Before
AfterBefore and after: a 1980s two-story in Glenview
A 1980s two-story near The Park, a typical kitchen for Glenview. The kitchen as it was: white cast-iron double sink and honey-oak cathedral raised-panel cabinets with worn finish near the handles, brass knobs. The reason for the call: a musty smell that wouldn't go away. Finished kitchen: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. On site this meant containment, final cleaning, plus rebuild.
Kitchen Mold Remediation in Glenview →
Before
AfterMount Prospect kitchen, two-story colonial from the 1990s: kitchen mold remediation
The site: a two-story colonial from the 1990s in Mount Prospect. What we started with: solid-surface integrated sink and golden-oak cabinets with oak soffits above. The main complaint was mold under the kitchen sink. Finished kitchen: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. Work included inspection and moisture readings, final cleaning, plus rebuild.
Kitchen Mold Remediation in Mount Prospect →
Before
AfterNorthbrook kitchen, 1950s ranch: kitchen remodeling
Finished: cabinets in forest green with matte black pulls, black honed granite counters, a green zellige-look tile backsplash, warm oak luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.
Kitchen Remodeling in Northbrook →
Before
AfterNorthbrook kitchen, 1960s ranch: kitchen cabinet painting
Finished: the same doors sprayed in deep navy, new satin brass pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Northbrook →How restoration goes
- InspectWe look at the mold, find the moisture source and measure how far it reaches.
- Fix the moistureThe leak or condensation is repaired before removal begins.
- Contain and removeContainment goes up, then moldy materials are removed and surfaces cleaned.
- Dry and rebuildWe confirm dryness, clean up and restore the cabinet, wall or floor.
Kitchen Mold Remediation questions from Northbrook homeowners
Can we stay home while you work?
For a typical kitchen job, many people stay home because the work area is contained. We tell you which areas to avoid during removal.
Do you need a license for mold remediation in Illinois?
There's no state mold license in Illinois. Ask any contractor how they contain, filter and remove, and we'll walk you through ours.
What affects the cost of mold remediation?
A small sink-base job and a full wall cavity are very different. The scope, containment and repairs drive the price, and you get it in writing.
Will bleach kill mold under my sink?
It may make it look better for a while. Without fixing the moisture and removing porous material, it usually returns.
What's the difference between mold removal and mold remediation?
Remediation is the full process: source, containment, removal, cleaning and drying. Simply cleaning the surface is removal.
Northbrook building permit for kitchen mold remediation: where do I apply?
Permits go through Development & Planning Services, phone 847-664-4050. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for kitchen mold remediation in Northbrook?
It depends on the scope. Northbrook's rule in short: Village lists separate permit types: Single Family Alterations - Interior, Electrical (new wiring/outlets), and Plumbing (new fixtures). We handle the permit when one is needed with Development & Planning Services.
Do you work in my part of Northbrook?
Yes. Our crews work across Northbrook, including Techny, Downtown Northbrook — ZIP 60062 — and nearby Glenview, Highland Park, Mount Prospect.
Working in Northbrook
- A lot of Northbrook kitchens date from the 1970s. We know these layouts well and what is worth keeping.
- Most Northbrook homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Development & Planning Services handles kitchen permits and pull them for you.
TechnyDowntown Northbrook
ZIP 60062
Kitchen Mold Remediation nearby
Other kitchen services in Northbrook
Kitchen Water Damage RestorationLeaks stopped, water extracted, cabinets and floors dried and rebuilt.
Kitchen Fire & Smoke RestorationSoot cleaned, smoke odor removed, burned cabinets and walls rebuilt.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.