Serving Buffalo Grove & nearby Arlington Heights, Palatine

Kitchen Mold Remediation in Buffalo Grove, IL

Mold under the sink, behind the dishwasher or inside a wall? We fix the moisture and remove the mold from Buffalo Grove kitchens.

  • Serving Buffalo Grove ZIP 60089
  • Containment so the damage doesn't spread
  • One team from cleanup to rebuild

Prefer a callback?

Leave your number and a Buffalo Grove mold remediation technician will call you.

Kitchen mold problems we take care of in Buffalo Grove

Spraying bleach on mold under a sink rarely solves it, because the source is still wet and the growth is often inside the particleboard or drywall. Our Buffalo Grove crew stops the moisture, sets up containment with HEPA air filtration and takes out what can't be cleaned.

Mold under the kitchen sink

The sink base is the most common place we find kitchen mold. A drain or supply drip keeps the particleboard damp, and that panel usually has to be replaced.

A large area of mold

Bigger areas need sealed containment, negative air and more careful removal. We explain the plan before we start.

Mold that keeps coming back

Mold returns when the moisture does. We find why that spot stays wet, whether a leak, condensation or poor ventilation, and fix it before removal.

Mold under the sink with no visible leak

If mold came back after cleaning and nothing seems to drip, we look for hidden moisture with meters and run the fixtures while we watch.

Musty smell with no mold in sight

A persistent earthy smell in the kitchen often means growth inside a cabinet, wall or under the floor. We inspect and use moisture readings to narrow it down.

Mold found during a remodel

Pulling out old cabinets often exposes mold on the wall or floor behind them. We contain the area and remove it before new materials go in.

Mold behind the refrigerator

Spots on the wall behind the refrigerator usually trace to the water line. We stop it and clean or replace the drywall.

Mold inside a wall after a leak

Stains or bubbling paint on a kitchen wall can mean moisture and growth inside. We cut it open under containment and clean the framing.

From cleanup to rebuild

  • Inspection and moisture readingsFirst we map how far the moisture and growth reach and what caused them.
  • Fixing the moisture sourceEPA advises fixing the water problem first; otherwise the mold returns.
  • ContainmentThe work area is sealed with plastic sheeting, and the rest of the kitchen and house is protected.
  • HEPA air filtrationWe filter the air in the work area with HEPA equipment while materials are removed.
  • Removing affected porous materialsMoldy drywall, insulation, particleboard and other porous materials are cut out and bagged.
  • Cleaning what staysSolid materials that remain are cleaned of growth and debris.
  • DryingWe confirm the materials are dry so growth doesn't restart.

Methods and equipment

Mold-resistant materialsOptions that hold up better in a spot that has seen water.
Containment sheetingPlastic barriers, zip doors and tape that isolate the work area.
Replacement panels and drywallMaterials to rebuild the area after remediation.
HEPA air scrubbersFiltered air movement that keeps the work area under control.
HEPA vacuumsCleanup equipment that holds fine dust instead of blowing it around.

Kitchen Mold Remediation before and after — Buffalo Grove homes

Kitchen Mold Remediation in a 1980s-1990s two-story colonial / tract house — problemProblem
Kitchen Mold Remediation in a 1980s-1990s two-story colonial / tract house — fixedFixed
Kitchen Mold Remediation in a 1980s-1990s two-story colonial / tract house — detailDetail

A Buffalo Grove 1990s two-story colonial: before and after

A 1990s two-story colonial near Green Knolls, a typical kitchen for Buffalo Grove. Before: white double sink and white thermofoil cabinets peeling at the edges, oak trim. The main complaint was black spots on the back of the sink base. After: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. On site this meant removing affected porous materials, cleaning what stays, plus drying.

Kitchen Mold Remediation project in Arlington Heights, beforeBefore
Kitchen Mold Remediation project in Arlington Heights, afterAfter

Before and after: a two-story colonial from the 1990s in Arlington Heights

The site: a two-story colonial from the 1990s in Arlington Heights. What we started with: white cast-iron double sink and honey-oak cathedral raised-panel cabinets with worn finish near the handles, brass knobs. The reason for the call: mold under the kitchen sink. Finished kitchen: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. The job covered inspection and moisture readings, removing affected porous materials, plus cleaning what stays.

Kitchen Mold Remediation in Arlington Heights →
Kitchen Mold Remediation project in Palatine, beforeBefore
Kitchen Mold Remediation project in Palatine, afterAfter

A Palatine 1980s two-story: before and after

A 1980s two-story in Palatine, a typical kitchen for Palatine. Before: solid-surface integrated sink and golden-oak cabinets with oak soffits above. What bothered the owners most: a musty smell that wouldn't go away. The result: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. Work included fixing the moisture source, containment, plus drying.

Kitchen Mold Remediation in Palatine →
Kitchen Remodeling project near Buffalo Grove, beforeBefore
Kitchen Remodeling project near Buffalo Grove, afterAfter

Buffalo Grove kitchen, 1980s two-story: kitchen remodeling

What changed: cabinets in pale sage with unlacquered brass knobs and cup pulls, charcoal concrete-look quartz counters, a terracotta-look square tile backsplash, light oak hardwood flooring and black cage pendants and slim recessed lights.

Kitchen Remodeling in Buffalo Grove →
Kitchen Cabinet Painting project near Buffalo Grove, beforeBefore
Kitchen Cabinet Painting project near Buffalo Grove, afterAfter

Buffalo Grove kitchen, two-story colonial from the 1990s: kitchen cabinet painting

The same doors sprayed in creamy white uppers and navy lowers, new satin brass pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Buffalo Grove →

Step by step after damage

  1. InspectWe look at the mold, find the moisture source and measure how far it reaches.
  2. Fix the moistureThe leak or condensation is repaired before removal begins.
  3. Contain and removeThe area is sealed, HEPA filtration runs and affected materials come out.
  4. Dry and rebuildWe confirm dryness, clean up and restore the cabinet, wall or floor.

Kitchen Mold Remediation questions from Buffalo Grove homeowners

Can we stay home while you work?
For a typical kitchen job, many people stay home because the work area is contained. We tell you which areas to avoid during removal.
Do I have to disclose mold remediation when selling in Illinois?
That's a question for your attorney or agent. We give you a written record of the cause, the work and the materials removed.
Can mold be removed without replacing my cabinets?
Often yes. Usually only the affected parts, like the sink base bottom or back panel, are replaced, and the rest of the kitchen stays.
Do you need a license for mold remediation in Illinois?
Illinois doesn't have a state mold remediation license. We follow industry practice such as IICRC guidance and EPA recommendations for containment and removal.
What causes mold under the kitchen sink?
Almost always a leak, sometimes condensation. We find which before we start.
Buffalo Grove building permit for kitchen mold remediation: where do I apply?
Permits go through Community Development Services, Building & Zoning Services (BS&A Online), phone 847-459-2530. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for kitchen mold remediation in Buffalo Grove?
It depends on the scope. Buffalo Grove's rule in short: Permit required to replace or modify a kitchen, including replacing cabinetry; replacing a sink or faucet needs a plumbing permit even in the same location; electrical must meet the 2017 NEC. We handle the permit when one is needed with Community Development Services, Building & Zoning Services.
Do you work in my part of Buffalo Grove?
Yes. Our crews work across Buffalo Grove, including The Highlands, Green Knolls, Windfield, Didier Farms — ZIP 60089 — and nearby Arlington Heights, Palatine, Lake Zurich.

Working in Buffalo Grove

  • A lot of Buffalo Grove kitchens date from the 1980s. We know these layouts well and what is worth keeping.
  • Most Buffalo Grove homes are single-family. We protect floors and driveways and leave the site clean every day.
  • We know how Community Development Services, Building & Zoning Services handles kitchen permits and pull them for you.

The HighlandsGreen KnollsWindfieldDidier Farms

ZIP 60089

Kitchen Mold Remediation nearby

Planning a kitchen project in Buffalo Grove?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback