Mold on cabinet backs and particleboard
Porous cabinet parts with mold are removed. Solid wood or plywood that is only surface-affected can often be cleaned and kept.
Serving Highland Park & nearby Northbrook, Glenview
Kitchen Mold Remediation in Highland Park, IL
Mold under the sink, behind the dishwasher or inside a wall? We fix the moisture and remove the mold from Highland Park kitchens.
- Serving Highland Park ZIP 60035
- Containment so the damage doesn't spread
- One team from cleanup to rebuild
Kitchen mold problems we take care of in Highland Park
Mold in a kitchen almost always follows water: a slow drip under the sink, a dishwasher leak or condensation behind the fridge. In Highland Park we find and fix that moisture first, then contain the area, remove the affected materials and clean what stays.
Mold behind the refrigerator
Spots on the wall behind the refrigerator usually trace to the water line. We stop it and clean or replace the drywall.
Mold under the sink with no visible leak
Sometimes the leak is intermittent, like a dishwasher drain that drips only during a cycle, or condensation on a cold pipe. We test the connections and meter the wood to find it.
Mold found during a remodel
If your remodel uncovered mold, we can stop that area, remove it properly and hand it back ready for the new kitchen.
Mold inside a wall after a leak
Stains or bubbling paint on a kitchen wall can mean moisture and growth inside. We cut it open under containment and clean the framing.
Mold under the kitchen sink
Black or green spots on the cabinet floor or back panel under the sink mean moisture has been there a while. We fix the leak, remove the damaged panel and clean the cavity behind it.
Mold that keeps coming back
Recurring mold is a moisture problem first. Once that's solved, we remove the affected material for good.
Musty smell with no mold in sight
A persistent earthy smell in the kitchen often means growth inside a cabinet, wall or under the floor. We inspect and use moisture readings to narrow it down.
What the restoration covers
- Inspection and moisture readingsFirst we map how far the moisture and growth reach and what caused them.
- Fixing the moisture sourceThe leak, drip or condensation problem is repaired, or we tell you who needs to fix it first.
- ContainmentWe isolate the affected area so spores and dust stay inside it.
- HEPA air filtrationAir scrubbers with HEPA filters run during the work, often with negative pressure on the containment.
- Removing affected porous materialsMoldy drywall, insulation, particleboard and other porous materials are cut out and bagged.
- Final cleaningThe containment area is HEPA-vacuumed and wiped down before the plastic comes down.
- RebuildNew cabinet panels, drywall, insulation and finishes go back in.
Methods and equipment
Replacement panels and drywallMaterials to rebuild the area after remediation.
Moisture metersReadings that show where moisture is and when drying is done.
HEPA vacuumsCleanup equipment that holds fine dust instead of blowing it around.
HEPA air scrubbersFiltered air movement that keeps the work area under control.
Containment sheetingSealed plastic walls that keep the work separate from the rest of the home.
Before and after: kitchens near Highland Park
Problem
Fixed
DetailA Highland Park two-story colonial from the 1990s: before and after
This one is a two-story colonial from the 1990s near St. John's. The kitchen as it was: white double sink and white thermofoil cabinets peeling at the edges, oak trim. The main complaint was black spots on the back of the sink base. Finished kitchen: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. On site this meant inspection and moisture readings, fixing the moisture source, plus removing affected porous materials.
Before
AfterA Glenview 1990s two-story colonial: before and after
This one is a 1990s two-story colonial near The Glen. The kitchen as it was: white cast-iron double sink and honey-oak cathedral raised-panel cabinets with worn finish near the handles, brass knobs. The reason for the call: mold under the kitchen sink. After: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. The job covered fixing the moisture source, HEPA air filtration, plus rebuild.
Kitchen Mold Remediation in Glenview →
Before
AfterBefore and after: a 1980s two-story in Mount Prospect
The site: a 1980s two-story in Mount Prospect. What we started with: solid-surface integrated sink and golden-oak cabinets with oak soffits above. The main complaint was mold under the kitchen sink. After: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. The job covered inspection and moisture readings, final cleaning, plus rebuild.
Kitchen Mold Remediation in Mount Prospect →
Before
AfterHighland Park kitchen, 1950s ranch: kitchen remodeling
Cabinets in white uppers and dusty blue lowers with matte black pulls, bright white quartz counters, a terracotta-look square tile backsplash, black-and-white checkerboard tile flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Highland Park →
Before
AfterBefore and after: a postwar Cape Cod in Highland Park
Finished: the same doors sprayed in pale sage, new polished nickel pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Highland Park →What happens after you call
- InspectWe look at the mold, find the moisture source and measure how far it reaches.
- Fix the moistureThe source gets fixed first so the work lasts.
- Contain and removeContainment goes up, then moldy materials are removed and surfaces cleaned.
- Dry and rebuildWe confirm dryness, clean up and restore the cabinet, wall or floor.
Kitchen Mold Remediation questions from Highland Park homeowners
Do you need a license for mold remediation in Illinois?
There's no state mold license in Illinois. Ask any contractor how they contain, filter and remove, and we'll walk you through ours.
Can we stay home while you work?
For a typical kitchen job, many people stay home because the work area is contained. We tell you which areas to avoid during removal.
Do I have to disclose mold remediation when selling in Illinois?
That's a question for your attorney or agent. We give you a written record of the cause, the work and the materials removed.
Do I need mold testing before remediation?
If you can see it and know why it's there, testing often isn't needed. For hidden mold, legal or sale questions, or peace of mind, hire an independent tester.
What's the difference between mold removal and mold remediation?
Removal suggests wiping it off. Remediation means fixing the moisture, containing the area, removing affected materials and cleaning, so it doesn't come back.
Do you work in my part of Highland Park?
Yes. Our crews work across Highland Park, including Ravinia District, Downtown Highland Park, Port Clinton, St. John's — ZIP 60035 — and nearby Northbrook, Glenview, Buffalo Grove.
Working in Highland Park
- A lot of Highland Park kitchens date from the pre-1940. We know these layouts well and what is worth keeping.
- Most Highland Park homes are single-family. We protect floors and driveways and leave the site clean every day.
- Older paint is treated with lead-safe practices: containment, HEPA cleanup and a clean hand-over.
Ravinia DistrictDowntown Highland ParkPort ClintonSt. John's
ZIP 60035
Kitchen Mold Remediation nearby
Other kitchen services in Highland Park
Kitchen Water Damage RestorationLeaks stopped, water extracted, cabinets and floors dried and rebuilt.
Kitchen Fire & Smoke RestorationSoot cleaned, smoke odor removed, burned cabinets and walls rebuilt.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.