Concrete ceilings in condo buildings
You can't recess lights into a concrete slab. In condos we use low-profile surface LED fixtures, track or a dropped soffit to hide wiring.
Serving Itasca & nearby Wood Dale, Elk Grove Village
Kitchen Lighting Installation in Itasca, IL
Recessed, pendant and under-cabinet lighting for Itasca kitchens, laid out so the counters are bright and wired by a licensed electrician.
- Serving Itasca ZIP 60143
- A new look without tearing the kitchen out
- Clean, protected work area every day
Kitchen lighting problems we solve in Itasca
Good kitchen light comes down to placement, color and control. We lay out the fixtures before cutting a single hole, pick a warm white that flatters the finishes, and wire everything to switches that make sense in your Itasca kitchen.
Pendants over the island
To hang pendants over a new island, the ceiling boxes have to be in the right spots and rated for the weight. We set them, then fine-tune the drop.
Adding recessed lights to an existing ceiling
Adding can lights to a finished kitchen is mostly careful cutting and fishing wire. We plan the grid around joists, ducts and plumbing above.
Canned or canless recessed lights?
We compare both for your ceiling: wafers for tight spaces and quick installs, cans with LED trims where the depth allows it.
Light over the sink
We install a downlight or pendant over the sink, often on a separate switch, so dishes don't happen in the dark.
Switches in the wrong place or one switch for everything
When every light is on one switch, you can't set a softer evening light. We split the layers onto separate switches and dimmers.
Fluorescent box or panel that hums and flickers
Old fluorescent boxes buzz, flicker and give flat light. We take them out, patch the ceiling and install recessed or surface LED fixtures.
Light that looks too blue or too yellow
Color temperature sets the mood. Warm white around 2700 to 3000K is common in kitchens, while cooler light can make wood and stone look harsh.
What the work covers
- Lighting layoutA plan for ceiling, task, island and accent light, with fixture positions and switching.
- Wiring and circuit checkWe confirm the lighting circuit can carry the new fixtures.
- Old fixtures removedThe old lights come out and the ceiling is prepared.
- Ceiling openings and boxesOpenings cut cleanly and pendant boxes secured to framing.
- Fixtures installedRecessed, pendant, surface and under-cabinet lights mounted and connected.
- Switches and dimmersLED-compatible dimmers and separate switches for each lighting layer.
- Testing and adjustmentEvery fixture tested, dimmers checked for flicker and pendants set to height.
Materials and finishes
Color temperature optionsWarm white around 2700 to 3000K, and selectable-color fixtures where you're unsure.
Accent lightingSofter layers that add depth in the evening.
Pendants and linear fixturesHanging fixtures that light the island and set the style.
Dimmers and controlsLED-rated dimmers, smart switches and motion or timer controls.
Under-cabinet LEDHardwired strips, puck lights or light bars mounted under the wall cabinets.
Kitchens like yours in Itasca: before and after
Before
AfterItasca kitchen, 1990s two-story colonial: kitchen lighting installation
This one is a 1990s two-story colonial in Itasca. The kitchen as it was: a brass chandelier over the nook. What bothered the owners most: a single old light that left the counters in shadow. After: two glass pendants and recessed lights on separate switches. On site this meant ceiling openings and boxes, fixtures installed, plus testing and adjustment.
Before
AfterA Wood Dale postwar bi-level: before and after
A postwar bi-level in Wood Dale, a typical kitchen for Wood Dale. The kitchen as it was: a dome ceiling light. The reason for the call: a single old light that left the counters in shadow. Finished kitchen: a flush drum fixture and under-cabinet lights on separate switches. The job covered lighting layout, old fixtures removed, plus fixtures installed.
Kitchen Lighting Installation in Wood Dale →
Before
AfterRoselle kitchen, 1970s split-level: kitchen lighting installation
This one is a 1970s split-level in Roselle. Before: a hanging swag lamp. What bothered the owners most: one ceiling fixture lighting the whole room. After: two glass pendants and recessed lights on separate switches. The job covered old fixtures removed, ceiling openings and boxes, plus fixtures installed.
Kitchen Lighting Installation in Roselle →
Before
AfterAn Itasca 1990s two-story colonial: before and after
Cabinets in light butter yellow with satin brass pulls, warm walnut butcher block counters, a gray beveled subway tile backsplash, black-and-white checkerboard tile flooring and two glass pendants and recessed lights.
Kitchen Remodeling in Itasca →
Before
AfterAn Itasca two-story colonial from the 1990s: before and after
The same doors sprayed in deep navy, new brushed nickel bar pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Itasca →How your kitchen lighting project goes
- Share photos and plansSend photos of the kitchen, the ceiling and any fixtures you've picked.
- Layout visitAn electrician looks at the space and plans the layers and switching.
- Written estimateA clear written price before any ceiling is cut.
- Install and testFixtures wired and mounted, dimmers set, ceiling patched and everything tested.
Kitchen Lighting Installation questions from Itasca homeowners
What color temperature is best for a kitchen?
Around 2700 to 3000K for a warm, natural look. Selectable-color fixtures let you decide after install.
Do I need an electrician to install kitchen lighting?
For new fixtures, new switches or any added circuits, yes. Replacing a fixture on an existing box is simpler, but a licensed electrician makes sure the box and wiring are sound.
How much does kitchen lighting installation cost?
Fixture count, wiring access, patching and controls drive the price. We put it in writing before we start.
Can you install fixtures I already bought?
We do. Send us the product details so we check the weight, mounting and dimmer compatibility.
Can old recessed cans be switched to LED?
Many old cans accept LED trims. We check the housings first and replace any that are worn.
Do Itasca condo associations need to approve kitchen lighting project?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
Itasca building permit for kitchen lighting project: where do I apply?
Permits go through Community Development Department (Building Division), phone (630) 773-5568. When your scope needs one, we prepare the application and schedule the inspections.
Does Itasca require a licensed electrician for kitchen lighting project?
Electrical contractors must hold a State of Illinois electrical license and post a $5,000 Code Compliance Bond to register with the Village. New circuits and wiring are done by licensed electricians.
Do I need a Itasca-registered contractor for kitchen lighting project?
Contractors must register with the Village and be bonded before a permit is issued; Certificate of Insurance naming the Village required. We take care of that before work starts.
Do you work in my part of Itasca?
Yes. Our crews work across Itasca, including North Side, South Side, Nordic Park, The Ranchettes — ZIP 60143 — and nearby Wood Dale, Elk Grove Village, Addison.
Working in Itasca
- A lot of Itasca kitchens date from the 1970s. We know these layouts well and what is worth keeping.
- Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.
- Live in the Itasca Historic District? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
North SideSouth SideNordic ParkThe RanchettesItasca Historical DistrictWalnut Street downtown
ZIP 60143
Kitchen Lighting Installation nearby
Other kitchen services in Itasca
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Kitchen Backsplash InstallationTile backsplashes with clean lines and flush outlets.