One old fixture lighting the whole kitchen
One bulb in the middle leaves the corners and counters dim. A planned layout spreads light where you cook and clean.
Serving Elk Grove Village & nearby Itasca, Wood Dale
Kitchen Lighting Installation in Elk Grove Village, IL
Recessed, pendant and under-cabinet lighting for Elk Grove Village kitchens, laid out so the counters are bright and wired by a licensed electrician.
- Crews working in Elk Grove Village ZIP 60007
- Most jobs done in days, with your kitchen still usable
- Samples and a written quote before we start
Kitchen lighting problems we solve in Elk Grove Village
Most kitchens have enough light in the middle of the floor and too little where you actually chop and read recipes. In Elk Grove Village we plan lighting in layers: recessed or ceiling light for the room, under-cabinet strips for the counters, pendants over the island, each on its own switch or dimmer.
Pendants over the island
To hang pendants over a new island, the ceiling boxes have to be in the right spots and rated for the weight. We set them, then fine-tune the drop.
Light that looks too blue or too yellow
Mixing bulbs of different color temperatures makes a kitchen look patchy. We use one consistent warm white across the fixtures.
Dark counters and shadows where you work
We fix shadowed counters by adding task light under the wall cabinets and placing ceiling fixtures toward the front of the counters instead of the room's center.
Canned or canless recessed lights?
We compare both for your ceiling: wafers for tight spaces and quick installs, cans with LED trims where the depth allows it.
Recessed lights under an insulated attic
Non-IC cans need clearance from insulation. We install fixtures rated for contact so the attic stays fully insulated.
LEDs that flicker or buzz on the dimmer
Older dimmers weren't made for LED loads and can cause flicker, buzz or lights that won't dim low. We install LED-compatible dimmers matched to the fixtures.
Light over the sink
A dedicated sink light on its own switch is useful early and late in the day. We add one where the ceiling or soffit allows.
What the work covers
- Lighting layoutA plan for ceiling, task, island and accent light, with fixture positions and switching.
- Wiring and circuit checkWe confirm the lighting circuit can carry the new fixtures.
- Old fixtures removedFluorescent boxes, old cans and outdated fixtures taken down and wiring made safe.
- Ceiling openings and boxesOpenings cut cleanly and pendant boxes secured to framing.
- Wire fished to fixtures and switchesNew cable run through the ceiling and walls with minimal access holes.
- Switches and dimmersControls installed where you enter and use the kitchen.
- Patching and cleanupWe close up openings and clean the work area.
Finishes we offer
Recessed lightingCanless LED wafers or housings with LED trims, IC-rated where insulation is present.
Color temperature optionsWarm white around 2700 to 3000K, and selectable-color fixtures where you're unsure.
Dimmers and controlsLED-rated dimmers, smart switches and motion or timer controls.
Under-cabinet LEDTask lighting aimed straight at the counters.
Pendants and linear fixturesSingle, paired or grouped pendants and long linear lights over islands and peninsulas.
Kitchens like yours in Elk Grove Village: before and after
Before
AfterKitchen Lighting Installation in a 1960s ranch, Elk Grove Village
A 1960s ranch in Elk Grove Village, a typical kitchen for Elk Grove Village. What we started with: a dome ceiling light. What bothered the owners most: one ceiling fixture lighting the whole room. After: a flush drum fixture and under-cabinet lights on separate switches. On site this meant wiring and circuit check, ceiling openings and boxes, plus patching and cleanup.
Before
AfterBefore and after: a 1980s two-story in Itasca
This one is a 1980s two-story near Itasca Historical District. Before: a brass chandelier over the nook. What bothered the owners most: one ceiling fixture lighting the whole room. After: two glass pendants and recessed lights on separate switches. On site this meant wiring and circuit check, ceiling openings and boxes, plus patching and cleanup.
Kitchen Lighting Installation in Itasca →
Before
AfterSchaumburg kitchen, two-story colonial from the 1990s: kitchen lighting installation
A two-story colonial from the 1990s near Olde Schaumburg Centre, a typical kitchen for Schaumburg. What we started with: two hanging glass pendants. What bothered the owners most: dim counters despite the ceiling lights. After: black cage pendants and slim recessed lights on separate switches. The job covered wire fished to fixtures and switches, switches and dimmers, plus patching and cleanup.
Kitchen Lighting Installation in Schaumburg →
Before
AfterElk Grove Village kitchen, postwar bi-level: kitchen remodeling
What changed: cabinets in light butter yellow with polished nickel pulls, black honed granite counters, a gray beveled subway tile backsplash, light oak hardwood flooring and two glass pendants and recessed lights.
Kitchen Remodeling in Elk Grove Village →
Before
AfterKitchen Cabinet Painting in a postwar bi-level, Elk Grove Village
What changed: the same doors sprayed in creamy white uppers and navy lowers, new brushed nickel bar pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Elk Grove Village →Day by day
- Share photos and plansTell us what feels too dark and what lights you have in mind.
- Layout visitWe check the ceiling type, joists, insulation and wiring, and mark fixture positions.
- Written estimateAn itemized estimate listing fixtures, wiring, switches, patching and any permit.
- Install and testWe install, test each light and clean up.
Kitchen Lighting Installation questions from Elk Grove Village homeowners
Can you install fixtures I already bought?
Yes. We install pendants and fixtures from any store, as long as they're listed for the location and the box can hold them.
Do I need an electrician to install kitchen lighting?
Anything beyond a bulb swap is best left to a licensed electrician. We also check whether the work needs a village permit.
Do I need a permit for kitchen lighting?
Often when new circuits are added; simple fixture replacements usually don't need one. We check with the village before work starts.
How much does kitchen lighting installation cost?
It depends on the number and type of fixtures, ceiling access, switching and any new circuits. We give a written, itemized estimate after the layout visit.
How long does recessed lighting installation take?
Adding a set of recessed lights to an existing ceiling often takes a day. Bigger layouts with pendants, under-cabinet lights and patching take longer.
Do you work in my part of Elk Grove Village?
Yes. Our crews work across Elk Grove Village — ZIP 60007 — and nearby Itasca, Wood Dale, Schaumburg.
Working in Elk Grove Village
- A lot of Elk Grove Village kitchens date from the 1970s. We know these layouts well and what is worth keeping.
- Most Elk Grove Village homes are single-family. We protect floors and driveways and leave the site clean every day.
- Older paint is treated with lead-safe practices: containment, HEPA cleanup and a clean hand-over.
ZIP 60007
Kitchen Lighting Installation nearby
Other kitchen services in Elk Grove Village
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Kitchen Backsplash InstallationTile backsplashes with clean lines and flush outlets.