Serving Itasca & nearby Wood Dale, Elk Grove Village

Countertop Installation in Itasca, IL

New countertops in Itasca: talk to a fabricator about slabs, templating and install dates.

  • Crews working in Itasca ZIP 60143
  • Most jobs done in days, with your kitchen still usable
  • Samples and a written quote before we start

Prefer a callback?

Leave your number and a Itasca countertop fabricator will call you.

Countertop problems we fix in Itasca

Countertop replacement in Itasca starts with a template and ends with a sink that is ready to use. We handle tear-out, templating, fabrication and installation, and plan seams where you will barely see them.

Original laminate from the 1970s

Laminate from the 1970s with a built-in backsplash is quick to remove and the most common counter we replace.

Getting slabs into the building

We measure the elevator and hallways first and plan seams so the pieces can actually reach your kitchen.

Not enough counter space

A bigger island top or a new peninsula adds workspace; we add support brackets where the overhang needs it.

Counters that stain easily

If spills soak in, the surface needs sealing or a change. Quartz doesn't need sealing at all.

Stained or burned laminate

Laminate with burn rings, swollen seams by the sink and peeling edges can't be repaired well. Stone or quartz replaces it for good.

Cracked or chipped stone

A small chip can be filled; a crack through the slab or around the sink usually means replacement.

Speckled builder granite

Busy speckled granite from the 2000s dates the kitchen. A calm quartz or a veined slab refreshes the look without new cabinets.

Seams that show or separate

Visible seams come from bad layout or templating. We plan seam locations and use color-matched epoxy.

What we do on the job

  • Material selectionHelp choosing quartz, granite, quartzite or wood, and picking your slab at the yard.
  • Old countertop removalCareful tear-out of the old tops and disposal, protecting cabinets and walls.
  • Cabinet check and levelingWe level and shim the bases so stone sits flat and seams stay tight.
  • Digital templatingPrecise templates of the installed cabinets, walls and appliances.
  • FabricationCutting, edge profile, sink and cooktop cut-outs and faucet holes.
  • Installation and seamsCounters installed and leveled, seams leveled and filled to match.
  • Backsplash optionsShort stone splash, full slab or a tile backsplash afterward.

Materials and finishes

GraniteNatural stone with strong heat resistance. Each slab is unique; seal it periodically.
QuartzEngineered stone: consistent color, no sealing, very stain resistant. Use trivets for hot pans.
Solid surfaceSeamless acrylic surfaces with integrated sinks; scratches can be sanded out.
QuartziteMarble-like veining with more hardness than marble. Ask for a true quartzite.
Edge profilesMost kitchens get an eased edge; a mitered edge makes thick-looking islands.

Before and after: kitchens near Itasca

Countertop Fabrication & Installation in a 1980s-1990s two-story colonial / tract house — beforeBefore
Countertop Fabrication & Installation in a 1980s-1990s two-story colonial / tract house — in progressIn progress
Countertop Fabrication & Installation in a 1980s-1990s two-story colonial / tract house — afterAfter
Countertop Fabrication & Installation in a 1980s-1990s two-story colonial / tract house — detailDetail

Countertop Installation in a two-story colonial from the 1990s, Itasca

This one is a two-story colonial from the 1990s near South Side. The kitchen as it was: white ceramic tile with dark stained grout lines and white double sink. The reason for the call: tile counters with grout that never looked clean. The result: warm walnut butcher block countertops with a tight seam, an undermount sink and a new faucet. The job covered material selection, cabinet check and leveling, plus backsplash options.

Countertop Installation project in Wood Dale, beforeBefore
Countertop Installation project in Wood Dale, afterAfter

Before and after: a 1950s ranch in Wood Dale

The site: a 1950s ranch in Wood Dale. What we started with: light beige laminate and stainless double sink. What bothered the owners most: worn laminate counters. After: charcoal concrete-look quartz countertops with a tight seam, an undermount sink and a new faucet. On site this meant old countertop removal, cabinet check and leveling, plus installation and seams.

Countertop Installation in Wood Dale →
Countertop Installation project in Elk Grove Village, beforeBefore
Countertop Installation project in Elk Grove Village, afterAfter

Before and after: a 1960s ranch in Elk Grove Village

This one is a 1960s ranch in Elk Grove Village. What we started with: laminate with an aluminum edge band and stainless double sink. The reason for the call: laminate that had seen better days. After: warm walnut butcher block countertops with a tight seam, an undermount sink and a new faucet. Work included material selection, digital templating, plus fabrication.

Countertop Installation in Elk Grove Village →
Kitchen Backsplash Installation project near Itasca, beforeBefore
Kitchen Backsplash Installation project near Itasca, afterAfter

Itasca kitchen, two-story colonial from the 1990s: kitchen backsplash installation

What changed: a white 2x8 tile in a vertical stack backsplash with clean edges and outlets set flush.

Kitchen Backsplash Installation in Itasca →
Kitchen Remodeling project near Itasca, beforeBefore
Kitchen Remodeling project near Itasca, afterAfter

An Itasca 1980s two-story: before and after

Cabinets in light butter yellow with satin brass pulls, warm walnut butcher block counters, a gray beveled subway tile backsplash, black-and-white checkerboard tile flooring and two glass pendants and recessed lights.

Kitchen Remodeling in Itasca →

How the job goes

  1. Choose your materialVisit a slab yard or look at samples at home; we help you choose.
  2. TemplateWe measure the installed cabinets on site with digital templating.
  3. FabricationYour tops are cut to template, with the chosen edge and cut-outs.
  4. InstallationOld tops out, new tops in, seams joined and sink mounted — usually in a day.
  5. HookupPlumbing goes back on after the sink adhesive sets.

Countertop Installation questions from Itasca homeowners

Can you install in a high-rise?
Yes. We check the elevator and building rules first and size the pieces to fit.
How long from template to installation?
Usually one to two weeks, depending on the material. You get the installation date at the template visit.
Will I be without a sink?
Briefly. The sink is reconnected soon after installation, once the adhesive has set.
Can you reuse my existing sink?
If it is in good condition and fits the new cut-out, yes. Many people switch to undermount at the same time.
Do my cabinets need to be replaced for stone?
Not usually. Most solid cabinets carry stone fine; we check level and support and reinforce where needed.
Do I need a Itasca-registered contractor for countertop installation?
Contractors must register with the Village and be bonded before a permit is issued; Certificate of Insurance naming the Village required. We take care of that before work starts.
Does countertop installation need a Itasca building permit, and who files it?
Permits go through Community Development Department (Building Division), phone (630) 773-5568. When your scope needs one, we prepare the application and schedule the inspections.
What kind of Itasca homes do you work in?
In Itasca we see Pre-1900 and early 1900s homes in the historic district and Suburban growth after the 1940s. Each comes with its own walls, wiring and plumbing, and we plan the job around them.
Can Itasca bulk pickup take my old appliance or cabinets?
Republic Services handles weekly curbside residential collection; page gives no bulk/appliance/Freon rules. If you'd rather not deal with it, we haul old units and debris away.
Do Itasca condo associations need to approve countertop installation?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
Do you work in my part of Itasca?
Yes. Our crews work across Itasca, including North Side, South Side, Nordic Park, The Ranchettes — ZIP 60143 — and nearby Wood Dale, Elk Grove Village, Addison.

Working in Itasca

  • A lot of Itasca kitchens date from the 1970s. We know these layouts well and what is worth keeping.
  • Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.
  • Live in the Itasca Historic District? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.

North SideSouth SideNordic ParkThe RanchettesItasca Historical DistrictWalnut Street downtown

ZIP 60143

Countertop Installation nearby

Planning a kitchen project in Itasca?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback