Soffit above the uppers
A soffit steals the top of the wall. Before ordering, we open it up to see if it hides a duct or pipe, then plan taller wall cabinets or a neat finished box.
Serving Glenview & nearby Northbrook, Park Ridge
Kitchen Cabinet Installation & Replacement in Glenview, IL
We tear out worn-out kitchen cabinets in Glenview and install new ones level, square and anchored to the studs.
- Local crews working in Glenview ZIP 60025, 60026, 60062
- Design, permits and every trade on one schedule
- A written, itemized estimate before any work
Cabinet problems we replace and fix in Glenview
When cabinet boxes are swollen, sagging or simply in the wrong places, paint and new doors only hide the problem. We remove the old cabinets in your Glenview kitchen and install new ones level, square and fastened into the framing, so doors line up and counters sit flat.
Peeling thermofoil or failing edges
Thermofoil that bubbles from heat and laminate edges that peel are hard to repair. If the cabinets are tired underneath as well, we replace the whole set.
Cabinets that don't match after a patch job
One replaced door here, a mismatched base there — after years of patches the kitchen looks pieced together. A full replacement brings everything back to one finish and one style.
Swollen sink base from an old leak
Bubbled panels and a musty smell under the sink point to past leaks. The fix is a new base cabinet plus a check of the drain and supply lines before it goes in.
Layout that fights you every day
A dishwasher that blocks the only drawer, a corner nobody can reach, a fridge door that hits the wall — new cabinets let us change where things go, not only how they look.
Boxes are falling apart
If you glue the same drawer back together every few months, the cabinet is worn out. We tear out the tired boxes and set new ones built to last.
Doors that won't line up
If you keep adjusting hinges and the doors still look uneven, the boxes themselves are twisted. New cabinets set plumb and level solve it for good.
Wasted space in the corner
A blind corner base with a door you have to crawl into hides half its storage. New cabinets can use a corner pull-out, a lazy Susan or a drawer layout instead.
Everything in a cabinet replacement
- Measuring and site checkA full set of measurements, a level check across the floor and a look at plumbing and outlet locations.
- Protection and tear-outFloors and doorways covered, appliances pulled, old cabinets and counters removed and hauled away.
- Wall and floor prepStuds located and marked, high spots found, drywall patched where old cabinets came off.
- Wall cabinets hung on studsUpper cabinets lifted onto a temporary ledger and screwed into studs, not drywall anchors.
- Fillers, panels and scribingFillers and end panels cut and scribed to uneven walls so doors clear walls and appliances.
- Doors, drawers and hardwareHinges and slides tuned so reveals are even, hardware mounted in straight lines.
- Ready for countertopsWe hand off a flat, rigid base line for templating and reconnect what we can once the tops are in.
Choices you'll make
Soft-close hinges and dovetail drawersSoft-close hinges and full-extension slides are standard on most lines today; dovetail drawer boxes are a sign of solid construction.
Ready-to-assemble cabinetsWe assemble and install RTA cabinets you bought yourself and check every box for damage first.
Door stylesShaker, slab, raised-panel or inset — the door style sets the look, and we install any of them.
Framed and frameless cabinetsA face frame adds rigidity and a traditional look, while frameless construction gives easier access to the full box.
Stock, semi-custom and custom linesWe install all three tiers: ready-made stock, semi-custom with more options, and fully custom when the room needs it.
Before and after: kitchens near Glenview
Before
In progress
AfterA Glenview 1950s ranch: before and after
This one is a 1950s ranch near The Glen. What we started with: original birch cabinets painted white decades ago, sagging doors, chrome pulls and laminate with an aluminum edge band. The main complaint was worn-out cabinets that no longer closed properly. After: new cabinets in warm taupe with brushed nickel bar pulls, installed level and ready for charcoal concrete-look quartz counters. The job covered protection and tear-out, doors, drawers and hardware, plus ready for countertops.
Before
AfterKitchen Cabinet Installation & Replacement in a 1950s ranch, Park Ridge
A 1950s ranch in Park Ridge, a typical kitchen for Park Ridge. Before: dark walnut-stained flush-panel cabinets with brass pulls and speckled laminate. The reason for the call: dated cabinets in a layout that no longer worked. Finished kitchen: new cabinets in powder blue with matte black pulls, installed level and ready for light marble-look quartz counters. The job covered protection and tear-out, fillers, panels and scribing, plus doors, drawers and hardware.
Kitchen Cabinet Installation & Replacement in Park Ridge →
Before
AfterKitchen Cabinet Installation & Replacement in a 1960s ranch, Skokie
A 1960s ranch in Skokie, a typical kitchen for Skokie. The kitchen as it was: 1970s dark pecan-stained cabinets and light beige laminate. The main complaint was old cabinets with too few drawers and a lot of wasted space. After: new cabinets in light gray uppers and dusty rose lowers with matte black pulls, installed level and ready for warm walnut butcher block counters. The job covered protection and tear-out, wall cabinets hung on studs, plus ready for countertops.
Kitchen Cabinet Installation & Replacement in Skokie →
Before
AfterGlenview kitchen, 1950s ranch: custom kitchen cabinets
What changed: built-to-fit cabinetry to the ceiling in white uppers and deep green lowers with matte black pulls and light marble-look quartz counters.
Custom Kitchen Cabinets in Glenview →
Before
AfterA Glenview postwar Cape Cod: before and after
Finished: black honed granite countertops with a tight seam, an undermount sink and a new faucet.
Countertop Fabrication & Installation in Glenview →From first visit to final walk-through
- Visit and measurementsWe look at the old cabinets, measure the room and talk through what you want to change.
- Cabinet plan and written estimateYou get a cabinet plan and a written quote that lists every part of the job.
- Ordering and deliveryWe place the order and check the delivery against the plan so nothing is missing on install day.
- Tear-out and installationRemoval, prep, leveling, hanging and trim — usually a few days for a typical kitchen.
- Adjustment and walk-throughDoors and drawers adjusted, hardware on, and a walk-through before countertops are templated.
Kitchen Cabinet Installation & Replacement questions from Glenview homeowners
Should I replace or reface my cabinets?
Sound boxes and a good layout point to refacing. Water damage, sagging or a layout you dislike point to new cabinets.
How much does it cost to replace kitchen cabinets?
Cabinet quality, run length and the work around them — removal, trim, counters — set the price. We measure first and then put a detailed estimate in writing.
What's the difference between stock, semi-custom and custom cabinets?
Stock comes in fixed sizes and finishes and ships fastest. Semi-custom adds more sizes, finishes and options. Custom is built to the exact room and usually has the longest lead time.
Do you install cabinets I bought myself?
We do. Install-only jobs are common: you buy the cabinets, we handle assembly, setting, trim and hardware.
Can I swap upper cabinets for open shelves?
Yes. We remove selected uppers, patch the wall and mount shelves on hidden brackets or cleats anchored to the framing.
Do I need a Glenview-registered contractor for cabinet replacement?
General and demolition contractors register with the Village: $50 fee, $25,000 bond, certificate of insurance and workers comp proof. Unlisted contractor types need no registration. We take care of that before work starts.
What does Glenview ask for on electrical work?
Electricians register with the Village by submitting a copy of their license; no fee or bond listed. New circuits and wiring are done by licensed electricians.
Glenview building permit for cabinet replacement: where do I apply?
Permits go through Community Development, Inspectional Services Division (Development Center), phone (847) 904-4330. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for cabinet replacement in Glenview?
It depends on the scope. Glenview's rule in short: Permit required for remodeling/altering a structure, changing the number or location of plumbing fixtures or piping, and new electrical work. We handle the permit when one is needed with Community Development, Inspectional Services Division (Development Center).
Do you work in my part of Glenview?
Yes. Our crews work across Glenview, including The Park, The Glen, The Grove — ZIP 60025, 60026, 60062 — and nearby Northbrook, Park Ridge, Des Plaines.
Working in Glenview
- A lot of Glenview kitchens date from the 2000s. We know these layouts well and what is worth keeping.
- Most Glenview homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Community Development, Inspectional Services Division (Development Center) handles kitchen permits and pull them for you.
The ParkThe GlenThe Grove
ZIP 60025ZIP 60026ZIP 60062
Kitchen Cabinet Installation & Replacement nearby
More for Glenview homeowners
- All kitchen services in GlenviewRemodels, cabinets, counters, plumbing, appliances and repairs
- Kitchen Cabinet Installation & Replacement across ChicagolandEvery town we cover for this service
-
CabinetsCabinet Refacing vs Painting vs Replacement: How to ChooseIn cabinet refacing vs painting vs replacement, start with the boxes. Sound boxes and only a color complaint: paint. Sound boxes but a dated or…4 min read
-
Costs and budgetingKitchen Cabinet Replacement Cost: New Cabinets, Installation and LaborKitchen cabinet replacement cost usually starts around $150 and runs to $500 per linear foot installed, or about $4,500 to $15,000 for an average…3 min read
-
CabinetsIKEA Kitchen Cabinets: Planning, Installation, Islands and Can You Paint IKEA Cabinets?IKEA kitchen cabinets in the US are the SEKTION system: modular frameless boxes with separate doors, drawers and panels, planned in IKEA's free…3 min read
Other kitchen services in Glenview
Custom Kitchen CabinetsBuilt-to-fit cabinetry up to the ceiling.
Kitchen Cabinet ModificationCabinets resized for new appliances, panels and fillers.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.