1990s hood on an old duct
Many 1990s kitchens still have the original hood on a small duct. We often replace both, so the new hood isn't held back by the old pipe.
Serving Aurora & nearby Batavia, Warrenville
Range Hood Installation in Aurora, IL
We install under-cabinet, wall chimney, island and insert range hoods in Aurora, ducted outside wherever the house allows.
- Installers working in Aurora ZIP 60506, 60502, 60505, 60504, 60503
- Hookups by licensed trades where the code calls for it
- Old unit hauled away on request
Range hood installs we handle in Aurora
Swapping a tired hood for a new one can be a short job, and adding a hood where there was none takes more planning. Either way, we work out in Aurora where the duct can run, what the wiring needs and whether the village wants a permit, before you order.
Flexible foil duct behind the old hood
Crinkled foil duct traps grease in its ridges and slows the air. We replace it with rigid, smooth metal duct with sealed joints.
High-CFM hood and makeup air
Bigger isn't always better. Above a certain airflow, many codes call for makeup air, so we size the hood to what you actually cook.
No hood over the range at all
Adding ventilation where there was none means finding a duct path, a power source and solid blocking for the hood. We plan all three before cutting anything.
Old hood that only recirculates
If your current hood has no duct and just pushes air back toward you, the fix is usually a ducted replacement with a proper exterior cap.
Duct too small for the new hood
The maker's instructions list the duct size the hood needs. If the existing duct is undersized, we enlarge the run rather than reduce at the hood.
Long duct run with many elbows
A duct that snakes across the ceiling to a far wall can starve even a strong fan. We look for a shorter path, sometimes straight up through the roof.
Hood too narrow for the cooktop
Upgrading to a 36-inch range under an old 30-inch hood is a common mismatch. The new hood should cover the full cooking surface.
Included with the install
- Site check and sizingWe measure the cooktop, the space above it and the possible duct routes, then size the hood.
- Permit and approvalsPermits, condo approvals and any makeup-air requirement are confirmed up front.
- Removing the old hoodPower off, old hood disconnected and taken down, the old duct inspected or removed.
- Blocking and mountingSolid wood blocking added in the wall or ceiling so the hood is anchored to framing.
- Wall cap or roof jackExterior wall cap or roof jack with a backdraft damper, flashed and sealed against weather.
- Recirculating setupDuctless installs get the maker's charcoal filter kit and a clear plan for replacing it.
- Test and cleanupWe run the hood, confirm the damper opens and closes, and haul away the old unit.
Models, parts and fittings
Duct, caps and dampersSmooth metal pipe and a damper-equipped exterior termination.
Wall chimney hoodsWall-mounted hoods with a tall cover, often used where there is no cabinet above the range.
Under-cabinet hoodsThe most common style, tucked under the upper cabinet above the range.
Ducted vs recirculatingVenting outdoors removes heat and moisture; ductless filtering is the fallback when no duct path exists.
Inserts and linersFan units built into a custom wood, plaster or metal hood cover.
What the work looks like in Aurora homes
Before
Installed
DetailBefore and after: a 1980s two-story in Aurora
The site: a 1980s two-story near Riddle Highlands. What we started with: black appliances and golden-oak cabinets with oak soffits above. The reason for the call: cooking smells that stayed in the house for hours. Finished kitchen: a new stainless chimney range hood ducted to the outside. Work included removing the old hood, wall cap or roof jack, plus recirculating setup.
Before
AfterBefore and after: a two-story colonial from the 1990s in Naperville
A two-story colonial from the 1990s near Tamarack, a typical kitchen for Naperville. What we started with: white appliances and white thermofoil cabinets peeling at the edges, oak trim. The main complaint was an old hood that was loud and pulled very little air. After: a new stainless chimney range hood ducted to the outside. The job covered removing the old hood, wall cap or roof jack, plus test and cleanup.
Range Hood Installation in Naperville →
Before
AfterKitchen Remodeling in a two-story colonial from the 1990s, Aurora
Cabinets in white uppers and deep green lowers with unlacquered brass knobs and cup pulls, warm walnut butcher block counters, a green zellige-look tile backsplash, warm oak luxury vinyl plank flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Aurora →
Before
AfterAurora kitchen, 1990s two-story colonial: kitchen cabinet painting
The same doors sprayed in creamy white uppers and navy lowers, new matte black pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Aurora →Install day
- Photos and modelSend photos of the range wall, the old hood and the cabinet above, plus the model you like.
- Duct route and sizingOn site we size the hood, pick the duct route and check permits and makeup air.
- Written estimateA clear written price with duct and electrical work listed separately.
- Install and testWe install, test the airflow and clean up the same day in most cases.
Range Hood Installation questions from Aurora homeowners
Who installs a range hood: a plumber, an electrician or a contractor?
It's mostly a ventilation and carpentry job with an electrical connection. We do the mounting and ducting and bring in an electrician when new wiring is needed.
How much does range hood installation cost?
A swap on an existing duct and a new island hood with a roof jack are very different jobs. You get a line-item estimate before work starts.
How many CFM does my range hood need?
We size airflow to your cooktop and your duct. Buying the biggest fan made rarely helps if the duct can't carry it.
Do I need an electrician to install a range hood?
Only if new wiring is needed. Connecting to an existing hood supply is part of our install.
Can I duct a hood outside in my Aurora condo?
Sometimes. It depends on the association's rules and the building's walls or shafts. We check before planning a duct.
Who inspects kitchen hoods and fire safety in Aurora?
Fire Prevention Bureau, 77 S. We schedule the inspection and have the paperwork ready.
Aurora building permit for range hood installation: where do I apply?
Permits go through Division of Building and Permits, City of Aurora, phone (630) 256-3130. When your scope needs one, we prepare the application and schedule the inspections.
What does Aurora ask for on electrical work?
City tests electrical contractors (ICC Standard Residential/Master Electrician accepted in lieu of testing). Electrical work over $500 requires a licensed Electrical Contractor, even for owner-occupants. New circuits and wiring are done by licensed electricians.
Do I need historic review for range hood installation in Aurora?
Aurora has locally reviewed areas, including Near Eastside, Riddle Highlands, Tanner and Palace Street. Exterior changes there can need review; interior-only work usually does not. We check before anything changes on the outside.
Aurora contractor registration: do kitchen contractors need it?
Contractors must be registered/licensed with the City (application, required testing if applicable, proof of insurance naming the City as additional insured). Homeowners may act as own contractor if owner-occupied 6+ months with a Homeowner Liability Waiver. We take care of that before work starts.
Do I need a permit for range hood installation in Aurora?
It depends on the scope. Aurora's rule in short: Interior remodels, structural changes and interior plumbing always need a permit; electrical/mechanical may. We handle the permit when one is needed with Division of Building and Permits, City of Aurora.
Do you work in my part of Aurora?
Yes. Our crews work across Aurora, including Near Eastside, Tanner, Riddle Highlands, Palace Street — ZIP 60506, 60502, 60505, 60504, 60503 — and nearby Batavia, Warrenville, Naperville.
Working in Aurora
- A lot of Aurora kitchens date from the 1990s. We know these layouts well and what is worth keeping.
- Most Aurora homes are single-family. We protect floors and driveways and leave the site clean every day.
- Live in a historic district? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
Near EastsideTannerRiddle HighlandsPalace StreetWest SideFar East Side
ZIP 60506ZIP 60502ZIP 60505ZIP 60504ZIP 60503
Range Hood Installation nearby
Other kitchen services in Aurora
Range Hood RepairFans, motors, switches, lights and rattles on kitchen range hoods.
Oven, Range & Cooktop InstallationGas and electric ranges, wall ovens and cooktops, safely connected.
Kitchen Electrical WorkNew circuits and outlets for kitchen appliances.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.