A pantry wall that wastes space
We plan pantry storage around jars, cereal boxes and bulk bags, with shelves at the right heights instead of fixed catalog spacing.
Serving Aurora & nearby Batavia, Warrenville
Custom Kitchen Cabinets in Aurora, IL
Cabinets designed and built for your Aurora kitchen's exact walls, ceilings and appliances, then installed by the same team.
- Kitchen remodels across Aurora ZIP 60506, 60502, 60505, 60504, 60503
- One project manager from drawings to final walk-through
- Permits and inspections handled for you
When Aurora kitchens need custom cabinets
When a kitchen has odd dimensions, tall ceilings or a style worth matching, built-to-fit cabinets are the honest answer. We measure your Aurora kitchen in detail, send drawings for approval and handle construction, finishing and installation in one job.
Small appliances crowding the counter
An appliance garage with a lift-up or pocket door hides the toaster and coffee maker while keeping them plugged in and ready.
Storage that doesn't fit how you cook
We ask what you cook and what you keep, then plan an interior for it: knife drawers, sheet-pan slots, a lift for heavy appliances.
Odd dimensions that stock sizes can't fill
Off-standard walls are where catalog cabinets look patched together. Building every cabinet to the measurement removes the filler strips and dead space.
Wide gaps and fillers everywhere
Lots of plain filler boards are the mark of stock sizes forced into a room. Custom cabinets replace them with usable space.
Island that should look like furniture
If the island is the centerpiece of the room, we build it as one: furniture-style base, seating side panels and storage where you need it.
Storage needed beyond the kitchen
Mudroom lockers, a butler's pantry, a laundry wall or a bar near the kitchen can be built in the same style as the cabinets.
Cabinets that stop short of the ceiling
That dusty gap over the wall cabinets is lost space. We run cabinets right up to the ceiling line and trim them so nothing collects on top.
What the project covers
- Design visit and detailed measuringAn in-home design visit with precise measurements and a list of what each cabinet has to hold.
- Drawings and renderingsElevations and a floor plan show every box, door and drawer before anything is built.
- Building the cabinetsBoxes, doors and drawers built to the approved drawings, with the interiors you planned.
- FinishingDoors and boxes finished off site in a controlled setting, not brushed in your kitchen.
- Tear-out and site prepOld cabinets removed and hauled away, walls patched and floors protected.
- Panels, crown and trimFinished panels for appliances and exposed sides, plus crown and light rail.
- Hardware and final adjustmentPulls installed, doors and drawers tuned for even gaps, and a walk-through with you.
Choices you'll make
Painted, stained and two-tone finishesPainted perimeter cabinets with a stained island, or the reverse, is a common custom combination.
Maple, cherry, oak and walnutMaple paints and stains evenly, cherry darkens with age, white oak shows a strong grain, walnut is rich and dark.
Plywood boxes and dovetail drawersPlywood boxes and dovetailed drawer boxes on full-extension soft-close slides are our usual construction.
Paint-grade constructionPainted doors are often made with MDF panels, which stay flatter and show fewer seasonal cracks.
Framed and frameless boxesWe build both: framed for a classic look, frameless for modern slab-door kitchens.
Before and after: kitchens near Aurora
Before
In progress
AfterCustom Kitchen Cabinets in a 1980s two-story, Aurora
This one is a 1980s two-story near West Side. The kitchen as it was: white thermofoil cabinets peeling at the edges, oak trim. What bothered the owners most: worn cabinets and storage that never fit the room. Finished kitchen: built-to-fit cabinetry to the ceiling in charcoal gray with polished nickel pulls and dark soapstone-look quartz counters. Work included drawings and renderings, tear-out and site prep, plus hardware and final adjustment.
Before
AfterA Warrenville 1980s two-story: before and after
The site: a 1980s two-story near Timber Creek. Before: honey-oak cathedral raised-panel cabinets with worn finish near the handles, brass knobs. What bothered the owners most: dated cabinets that didn't fit the room or the house. Finished kitchen: built-to-fit cabinetry to the ceiling in pale sage with brushed nickel bar pulls and warm walnut butcher block counters. On site this meant design visit and detailed measuring, finishing, plus hardware and final adjustment.
Custom Kitchen Cabinets in Warrenville →
Before
AfterCustom Kitchen Cabinets in a 1990s two-story colonial, Geneva
This one is a 1990s two-story colonial near Mill Creek. The kitchen as it was: golden-oak cabinets with oak soffits above. The reason for the call: cabinets that stopped short of the ceiling under an old soffit. The result: built-to-fit cabinetry to the ceiling in white uppers and deep green lowers with matte black pulls and charcoal concrete-look quartz counters. On site this meant building the cabinets, tear-out and site prep, plus hardware and final adjustment.
Custom Kitchen Cabinets in Geneva →
Before
AfterAn Aurora 1990s two-story colonial: before and after
New cabinets in warm taupe with satin brass pulls, installed level and ready for dark soapstone-look quartz counters.
Kitchen Cabinet Installation & Replacement in Aurora →
Before
AfterAurora kitchen, 1980s two-story: kitchen design & layout planning
What changed: a new layout with an island, cabinets in white uppers and dusty blue lowers, warm walnut butcher block counters and recessed lights and under-cabinet LED strips.
Kitchen Design & Layout Planning in Aurora →The project, step by step
- Design consultationWe measure the kitchen, look at the style of the house and talk about storage and budget.
- Drawings and estimateElevations, a materials list and a written, itemized estimate for build and install.
- Approval and buildAfter approval we build and finish the cabinets, which often takes several weeks.
- InstallationTear-out, then the new cabinets set, scribed, trimmed and paneled.
- Final fit and walk-throughLast adjustments, cleanup and a walk-through before countertops or after, as the schedule needs.
Custom Kitchen Cabinets questions from Aurora homeowners
Can you match my existing cabinets or trim?
In most cases, yes — bring us a door or point us to the trim, and we make finish samples until it matches.
Do you make vanities, laundry and built-ins too?
Yes. Bathroom vanities, laundry cabinets, mudroom lockers and bars can be built in the same style as the kitchen.
How much do custom kitchen cabinets cost?
Size of the kitchen, wood species, door style, finish and interior fittings drive the price. We give a written, itemized estimate after measuring.
Which wood is best for kitchen cabinets?
There's no single best wood. Maple is a strong all-rounder; oak and walnut show more grain; cherry ages to a deeper red.
What's the difference between custom and semi-custom cabinets?
Semi-custom lets you adjust a catalog design. Custom starts from your measurements and has no fixed sizes or finish list.
Aurora contractor registration: do kitchen contractors need it?
Contractors must be registered/licensed with the City (application, required testing if applicable, proof of insurance naming the City as additional insured). Homeowners may act as own contractor if owner-occupied 6+ months with a Homeowner Liability Waiver. We take care of that before work starts.
What kind of Aurora homes do you work in?
In Aurora we see Victorian, Prairie School, Sears catalog homes and Lustron steel houses. Each comes with its own walls, wiring and plumbing, and we plan the job around them.
Aurora building permit for custom cabinet project: where do I apply?
Permits go through Division of Building and Permits, City of Aurora, phone (630) 256-3130. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for custom cabinet project in Aurora?
It depends on the scope. Aurora's rule in short: Interior remodels, structural changes and interior plumbing always need a permit; electrical/mechanical may. We handle the permit when one is needed with Division of Building and Permits, City of Aurora.
Do you work in my part of Aurora?
Yes. Our crews work across Aurora, including Near Eastside, Tanner, Riddle Highlands, Palace Street — ZIP 60506, 60502, 60505, 60504, 60503 — and nearby Batavia, Warrenville, Naperville.
Working in Aurora
- A lot of Aurora kitchens date from the 1990s. We know these layouts well and what is worth keeping.
- Most Aurora homes are single-family. We protect floors and driveways and leave the site clean every day.
- Live in a historic district? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
Near EastsideTannerRiddle HighlandsPalace StreetWest SideFar East Side
ZIP 60506ZIP 60502ZIP 60505ZIP 60504ZIP 60503
Custom Kitchen Cabinets nearby
More for Aurora homeowners
- All kitchen services in AuroraRemodels, cabinets, counters, plumbing, appliances and repairs
- Custom Kitchen Cabinets across ChicagolandEvery town we cover for this service
-
Costs and budgetingKitchen Cabinet Replacement Cost: New Cabinets, Installation and LaborKitchen cabinet replacement cost usually starts around $150 and runs to $500 per linear foot installed, or about $4,500 to $15,000 for an average…3 min read
-
CabinetsKitchen Cabinet Materials, Doors and Hardware: What to Know Before You BuyYes, you can usually resurface kitchen cabinets instead of replacing them, as long as the boxes are dry and solid. How long the result lasts depends…3 min read
Other kitchen services in Aurora
Kitchen Cabinet Installation & ReplacementNew cabinets installed, leveled and ready for counters.
Kitchen Design & Layout PlanningLayouts, 3D plans and material picks before work starts.
Kitchen Island & Peninsula InstallationNew islands and peninsulas with seating and storage.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.