Trap too small for the kitchen
Kitchens grow: more sinks, more fryers, more covers. When the trap can't keep up, we size a replacement to the current load.
Serving Wheaton & nearby Glen Ellyn, Winfield
Grease Trap Installation & Cleaning in Wheaton, IL
Grease traps and interceptors sized, installed, cleaned and kept on schedule for restaurants and food-service kitchens in Wheaton.
- Commercial kitchens across Wheaton ZIP 60189, 60187
- Nights, early mornings and closed days
- Coordination with the fire and health inspectors
Grease trap problems we handle in Wheaton
Every kitchen that washes greasy pans sends fats, oils and grease toward the sewer, and the trap or interceptor is what stops them. In Wheaton we size and install grease traps, clean and maintain them on a schedule, and keep the service records the sanitary district or village asks to see.
Moving into a space with an unknown trap
Previous tenants don't always leave records. We find the trap, check its size and condition and start a fresh log.
Staff cleaning the trap themselves
Hand-cleaning a small trap is possible; doing it consistently with proper disposal and records is where kitchens fall behind. We handle it on a schedule.
Sewer or rotten-egg smell in the kitchen
A sour smell near the sinks or the back door often comes from a trap that is overdue for cleaning or has a bad lid seal. We clean it and check the seal and venting.
Interceptor overdue for pumping
Large in-ground interceptors are pumped by licensed waste haulers. We schedule the pump-out, inspect the tank and record the service.
Landlord requires grease maintenance records
Shared sewer lines in strip centers make grease every tenant's problem. Landlords often want proof each kitchen services its trap, and we provide it.
Health inspector asked about the grease trap
Inspectors want to see maintenance, not just a trap. Our service tickets and log give you the paper trail.
Not sure how often to clean
A common rule of thumb is to clean before grease and solids fill about a quarter of the trap's depth. Your local FOG rules may set a schedule as well.
What the job covers
- Site visit and trap locationA look at every grease-producing fixture and where it drains, plus the trap itself.
- SizingWe calculate the size from your sinks, flow and menu, not a guess.
- InstallationNew traps installed with proper venting, flow control and access for cleaning.
- Cleaning and pump-outSmall traps cleaned on site; larger interceptors pumped by licensed waste haulers.
- Inspection of baffles and outletWith the trap empty we check baffles, walls, lid gasket and the outlet line.
- Service log and manifestsEach visit is recorded with date, measurements and work done; pumped waste is documented with the hauler's manifest.
- Recurring scheduleNext service set by how fast your trap fills, with reminders before it's due.
Systems and components
Poly and coated steel trapsPolyethylene traps don't rust; coated steel is common in older installs.
Under-sink trap or interceptorIndoor traps suit lighter grease loads; interceptors suit busy kitchens and many fixtures.
In-ground grease interceptorsGravity interceptors for high-volume kitchens, serviced by pump truck.
Gasketed lids and access risersLids and risers that make the trap easy to open and keep smell out of the kitchen.
Under-sink grease trapsSmall indoor traps for cafes, bakeries and kitchens with limited grease.
What the work looks like in Wheaton homes
Before
AfterWheaton kitchen, restaurant kitchen: grease trap installation & cleaning
A restaurant kitchen near Wheaton Center, a typical kitchen for Wheaton. The reason for the call: a FOG notice and no maintenance records. Finished kitchen: the same interceptor pumped and the lid closed, service hose coiled on the truck. On site this meant site visit and trap location, installation, plus inspection of baffles and outlet.
Before
AfterGlen Ellyn kitchen, bakery kitchen: grease trap installation & cleaning
The site: a bakery kitchen in Glen Ellyn. What bothered the owners most: a FOG notice and no maintenance records. After: the same interceptor pumped and the lid closed, service hose coiled on the truck. Work included site visit and trap location, installation, plus cleaning and pump-out.
Grease Trap Installation & Cleaning in Glen Ellyn →
Before
AfterA Wheaton cafe kitchen: before and after
The same hood degreased to bare stainless with an inspection sticker area.
Commercial Hood Cleaning in Wheaton →
Before
AfterBefore and after: a two-story colonial from the 1990s in Wheaton
What changed: cabinets in muted aubergine with matte black pulls, dark soapstone-look quartz counters, a terracotta-look square tile backsplash, hickory luxury vinyl plank flooring and two glass pendants and recessed lights.
Kitchen Remodeling in Wheaton →
Before
AfterA Wheaton two-story colonial from the 1990s: before and after
Finished: the same doors sprayed in white uppers and dusty blue lowers, new polished nickel pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Wheaton →Scheduling around service
- Call or book a visitShare what you're seeing and any letter from the village or inspector.
- Inspect the trapA look inside the trap and at the lines around it.
- Written estimateYou get an itemized estimate for cleaning, repair or a new trap.
- Clean, pump or installThe trap is cleaned or pumped, repaired or replaced, often before or after service hours.
- Log and scheduleYou get a dated service record and the next visit on the calendar.
Grease Trap Installation & Cleaning questions from Wheaton businesses
How does a grease trap work?
Baffles and slow flow let fats rise and food solids sink, so mostly water leaves the trap.
Can I clean my grease trap myself?
You can, but inspectors will ask for the log and how the waste was disposed of. Many kitchens hand it off to keep that consistent.
How is a grease trap sized?
We count the sinks and fixtures, figure the flow and check the local requirement to pick the right size.
What's the difference between a grease trap and a grease interceptor?
Size and location. Traps sit under or near sinks and are cleaned by hand; interceptors are buried tanks pumped by truck.
What does grease trap service cost?
Trap size, how full it is, access, line jetting and how often we visit drive the price. We give a written, itemized estimate after inspecting the trap.
Does grease trap service need a Wheaton building permit, and who files it?
Permits go through Building & Code Enforcement Department, phone 630-260-2050. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a Wheaton-registered contractor for grease trap service?
Yes: contractors register online with the City; $75 fee, renewed annually. We take care of that before work starts.
Do you work in my part of Wheaton?
Yes. Our crews work across Wheaton, including Downtown Wheaton, Wheaton Center, Danada Square area — ZIP 60189, 60187 — and nearby Glen Ellyn, Winfield, Glendale Heights.
Working in Wheaton
- We plan Wheaton jobs around your service hours, including early mornings, nights and closed days.
- When a permit is required, we prepare the submittal for Building & Code Enforcement Department and meet the fire inspector on site.
- Insurance certificates, site access and landlord requirements are sorted out before work starts.
Downtown WheatonWheaton CenterDanada Square area
ZIP 60189ZIP 60187
Grease Trap Installation & Cleaning nearby
Other kitchen services in Wheaton
Commercial Kitchen Hood InstallationType I and II hoods, grease duct, fans and makeup air, built to NFPA 96.
Commercial Hood CleaningHood, duct and roof fan degreased to bare metal, after hours.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.