Health inspector asked about the grease trap
If the inspector wrote up a missing log or a trap in poor repair, we clean or fix the trap and start a record for every visit.
Serving Glendale Heights & nearby Bloomingdale, Carol Stream
Grease Trap Installation & Cleaning in Glendale Heights, IL
Grease traps and interceptors sized, installed, cleaned and kept on schedule for restaurants and food-service kitchens in Glendale Heights.
- Commercial kitchens across Glendale Heights ZIP 60139
- Nights, early mornings and closed days
- Coordination with the fire and health inspectors
Grease trap problems we handle in Glendale Heights
A grease trap only works when it is the right size and emptied before it fills. We install under-sink traps and in-ground interceptors for Glendale Heights restaurants, cafes, bakeries and institutional kitchens, and set up cleaning so backups and FOG violations stop being a surprise.
Trap too small for the kitchen
An undersized trap needs constant cleaning and still lets grease through. Replacing it with a correctly sized unit usually costs less trouble over time.
Landlord requires grease maintenance records
Shared sewer lines in strip centers make grease every tenant's problem. Landlords often want proof each kitchen services its trap, and we provide it.
Staff cleaning the trap themselves
If staff are scooping the trap into the trash, there's no record and a real mess. Regular service gives you clean traps and documentation.
Grease clogs in the sewer line
Grease that escapes the trap cools and hardens in the pipe. We jet the line clean and fix the trap problem that let it through.
New restaurant needs a trap or interceptor
New food establishments usually need a grease trap or interceptor approved during plan review. We size it from your fixtures and flow and install it before inspection.
School, church or daycare kitchen trap
Institutional kitchens with lighter use still need their trap cleaned and logged. We set an interval that fits how often the kitchen cooks.
Sinks and floor drains backing up
When the three-compartment sink or floor drains back up during service, the trap is often full or the line past it is coated with grease. We clean the trap and clear the line.
What we handle on site
- Site visit and trap locationWe find the trap or interceptor, open it and look at size, condition and connections.
- SizingWe calculate the size from your sinks, flow and menu, not a guess.
- Permits and plan reviewWe file the plumbing permit and match the trap to what the plan reviewer and FOG program expect.
- Cleaning and pump-outSmall traps cleaned on site; larger interceptors pumped by licensed waste haulers.
- Inspection of baffles and outletWe look inside the empty trap for damage that lets grease pass.
- Line jettingGrease-coated drain lines downstream of the trap cleared with hydro-jetting when needed.
- Recurring scheduleA standing cleaning interval matched to your trap and cooking volume.
Systems and components
Poly and coated steel trapsPlastic traps resist corrosion; steel traps are still used where size or listing calls for them.
Under-sink trap or interceptorVolume and menu decide: a small trap for a cafe, an interceptor for a fryer-heavy kitchen.
Gasketed lids and access risersTight-sealing lids keep odor in; risers bring buried interceptors up to grade for service.
Flow control fittingsA fitting that limits flow so the trap can do its job.
Under-sink grease trapsCompact hydromechanical traps that sit under or next to a sink and are cleaned often.
Kitchens like yours in Glendale Heights: before and after
Before
AfterA Glendale Heights cafe kitchen: before and after
A cafe kitchen in Glendale Heights, a typical kitchen for Glendale Heights. The reason for the call: a FOG notice and no maintenance records. After: the same interceptor pumped and the lid closed, service hose coiled on the truck. The job covered cleaning and pump-out, inspection of baffles and outlet, plus recurring schedule.
Before
AfterBefore and after: a bakery kitchen in Bloomingdale
A bakery kitchen in Bloomingdale, a typical kitchen for Bloomingdale. The main complaint was a grease trap that kept backing up the prep sinks. The result: the same interceptor pumped and the lid closed, service hose coiled on the truck. The job covered site visit and trap location, permits and plan review, plus line jetting.
Grease Trap Installation & Cleaning in Bloomingdale →
Before
AfterA Glendale Heights cafe kitchen: before and after
What changed: the same hood degreased to bare stainless with an inspection sticker area.
Commercial Hood Cleaning in Glendale Heights →
Before
AfterBefore and after: a 1990s two-story colonial in Glendale Heights
Cabinets in light butter yellow with satin brass pulls, warm walnut butcher block counters, a gray beveled subway tile backsplash, black-and-white checkerboard tile flooring and two glass pendants and recessed lights.
Kitchen Remodeling in Glendale Heights →
Before
AfterBefore and after: a 1990s two-story colonial in Glendale Heights
What changed: the same doors sprayed in forest green, new satin brass pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Glendale Heights →How the project goes
- Call or book a visitTell us about the kitchen, the backup or notice and when the trap was last cleaned.
- Inspect the trapA look inside the trap and at the lines around it.
- Written estimateA clear written quote for the work and the recommended schedule.
- Clean, pump or installWe do the work around your hours and leave the area clean.
- Log and scheduleRecords for your files and a cleaning interval that fits your kitchen.
Grease Trap Installation & Cleaning questions from Glendale Heights businesses
What does grease trap service cost?
Trap size, how full it is, access, line jetting and how often we visit drive the price. We give a written, itemized estimate after inspecting the trap.
How does a grease trap work?
Wastewater slows down in the trap, grease floats to the top, solids settle and cleaner water flows out between the baffles.
Can I clean my grease trap myself?
For a small indoor trap, yes, with care and records. For in-ground interceptors, no; they need a pump truck.
What records do inspectors want?
A maintenance log with service dates and what was done, and for pumped interceptors the hauler's manifests.
What are the grease trap rules in Glendale Heights?
Grease rules in Glendale Heights come from the local FOG ordinance set by the village or sanitary district, plus the plumbing code. They cover when a trap is required, its size and how maintenance is documented.
Do I need a Glendale Heights-registered contractor for grease trap service?
Contractors must be licensed with the Village before working; $20,000 surety/license bond required. We take care of that before work starts.
Does grease trap service need a Glendale Heights building permit, and who files it?
Permits go through Community Development Department, phone 630-260-6030. When your scope needs one, we prepare the application and schedule the inspections.
Do you work in my part of Glendale Heights?
Yes. Our crews work across Glendale Heights — ZIP 60139 — and nearby Bloomingdale, Carol Stream, Addison.
Working in Glendale Heights
- Kitchens in Glendale Heights keep cooking as long as possible: we schedule the noisy work for off-hours.
- Permits, plan review and inspections go through Community Development Department and the fire department when the job needs them.
- Certificates of insurance, keys, roof access and landlord sign-off are arranged ahead of the first visit.
ZIP 60139
Grease Trap Installation & Cleaning nearby
Other kitchen services in Glendale Heights
Commercial Kitchen Hood InstallationType I and II hoods, grease duct, fans and makeup air, built to NFPA 96.
Commercial Hood CleaningHood, duct and roof fan degreased to bare metal, after hours.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.