Interceptor overdue for pumping
When the outdoor interceptor hasn't been pumped in a long while, grease and solids crowd out the water. We arrange pumping by a licensed hauler and check the baffles and outlet.
Serving Glen Ellyn & nearby Wheaton, Lombard
Grease Trap Installation & Cleaning in Glen Ellyn, IL
Grease traps and interceptors sized, installed, cleaned and kept on schedule for restaurants and food-service kitchens in Glen Ellyn.
- Commercial kitchens across Glen Ellyn ZIP 60137
- Nights, early mornings and closed days
- Coordination with the fire and health inspectors
Grease trap problems we handle in Glen Ellyn
Slow floor drains, sewer smell at the back door or a FOG notice from the village usually lead back to the grease trap. Our Glen Ellyn crews diagnose the trap, clean or replace it and leave you with a maintenance log that holds up at inspection.
Grease clogs in the sewer line
Grease that escapes the trap cools and hardens in the pipe. We jet the line clean and fix the trap problem that let it through.
Notice from the village or sanitary district
FOG programs can issue notices when grease shows up in the sewer downstream of your building. We inspect the trap, clean it and set up a maintenance schedule with records.
Not sure how often to clean
A common rule of thumb is to clean before grease and solids fill about a quarter of the trap's depth. Your local FOG rules may set a schedule as well.
Health inspector asked about the grease trap
If the inspector wrote up a missing log or a trap in poor repair, we clean or fix the trap and start a record for every visit.
Sewer or rotten-egg smell in the kitchen
A sour smell near the sinks or the back door often comes from a trap that is overdue for cleaning or has a bad lid seal. We clean it and check the seal and venting.
Staff cleaning the trap themselves
Small under-sink traps can be cleaned by trained staff, but grease has to be disposed of properly and a log kept. We can take that over or set up the routine.
Sinks and floor drains backing up
When the three-compartment sink or floor drains back up during service, the trap is often full or the line past it is coated with grease. We clean the trap and clear the line.
What the job covers
- Site visit and trap locationWe find the trap or interceptor, open it and look at size, condition and connections.
- Permits and plan reviewPlumbing permit and plan review for new or replaced traps, where the village requires it.
- InstallationUnder-sink traps set and plumbed, or in-ground interceptors excavated, set and connected.
- Cleaning and pump-outGrease and solids removed, the trap scraped and baffles cleared.
- Inspection of baffles and outletWith the trap empty we check baffles, walls, lid gasket and the outlet line.
- Line jettingJetting for lines that have built up grease past the trap.
- Service log and manifestsA maintenance log and disposal records ready for inspectors and the property manager.
Equipment and options
Poly and coated steel trapsPolyethylene traps don't rust; coated steel is common in older installs.
Flow control fittingsFlow restrictors that keep water moving through the trap slowly enough for grease to separate.
In-ground grease interceptorsGravity interceptors for high-volume kitchens, serviced by pump truck.
Under-sink grease trapsSmall indoor traps for cafes, bakeries and kitchens with limited grease.
Gasketed lids and access risersLids and risers that make the trap easy to open and keep smell out of the kitchen.
Before and after: kitchens near Glen Ellyn
Before
AfterA Glen Ellyn commercial kitchen: before and after
A commercial kitchen in Glen Ellyn, a typical kitchen for Glen Ellyn. The reason for the call: a FOG notice and no maintenance records. The result: the same interceptor pumped and the lid closed, service hose coiled on the truck. Work included inspection of baffles and outlet, line jetting, plus service log and manifests.
Before
AfterBefore and after: a commercial kitchen in Wheaton
This one is a commercial kitchen near Danada Square area. The reason for the call: a full interceptor and a sour smell by the back door. The result: the same interceptor pumped and the lid closed, service hose coiled on the truck. Work included installation, inspection of baffles and outlet, plus service log and manifests.
Grease Trap Installation & Cleaning in Wheaton →
Before
AfterA Glen Ellyn cafe kitchen: before and after
The same hood degreased to bare stainless with an inspection sticker area.
Commercial Hood Cleaning in Glen Ellyn →
Before
AfterKitchen Remodeling in a 1950s ranch, Glen Ellyn
What changed: cabinets in light butter yellow with polished nickel pulls, black honed granite counters, a gray beveled subway tile backsplash, light oak hardwood flooring and two glass pendants and recessed lights.
Kitchen Remodeling in Glen Ellyn →
Before
AfterBefore and after: a 1960s ranch in Glen Ellyn
The same doors sprayed in creamy white uppers and navy lowers, new brushed nickel bar pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Glen Ellyn →From survey to sign-off
- Call or book a visitTell us about the kitchen, the backup or notice and when the trap was last cleaned.
- Inspect the trapA look inside the trap and at the lines around it.
- Written estimateA clear written quote for the work and the recommended schedule.
- Clean, pump or installWe do the work around your hours and leave the area clean.
- Log and scheduleRecords for your files and a cleaning interval that fits your kitchen.
Grease Trap Installation & Cleaning questions from Glen Ellyn businesses
What does grease trap service cost?
We price after seeing the trap, and the estimate is itemized and in writing.
How often should a grease trap be cleaned?
There's no single answer. We measure at each visit and adjust, within whatever schedule your FOG authority requires.
Can you service the trap outside our hours?
Yes. We schedule cleaning before opening or after closing to keep the kitchen running.
How does a grease trap work?
It gives greasy water time to cool and separate, holding the grease and solids back while water moves on.
What records do inspectors want?
Dated cleaning records and disposal documentation. We give you both after every visit.
Glen Ellyn contractor registration: do kitchen contractors need it?
Contractors must register with the Village and meet license and insurance requirements (Village Code 4-1-11); work that does not need a building permit is exempt. We take care of that before work starts.
Do you work in my part of Glen Ellyn?
Yes. Our crews work across Glen Ellyn — ZIP 60137 — and nearby Wheaton, Lombard, Glendale Heights.
Working in Glen Ellyn
- Downtime costs you covers, so Glen Ellyn work is booked around your slow days and closing times.
- We coordinate with the Glen Ellyn building department and the fire department so inspections don't hold up your opening.
- We handle the paperwork landlords and property managers ask for: insurance, access times and scope sign-off.
ZIP 60137
Grease Trap Installation & Cleaning nearby
Other kitchen services in Glen Ellyn
Commercial Kitchen Hood InstallationType I and II hoods, grease duct, fans and makeup air, built to NFPA 96.
Commercial Hood CleaningHood, duct and roof fan degreased to bare metal, after hours.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.